Added definitions for the MAIN register.

This commit is contained in:
nvt-se 2007-10-01 11:56:49 +00:00
parent d6ec25e37c
commit c0686e80f1

View File

@ -53,6 +53,21 @@
#define CC1020_STATUS6 0x4A
#define CC1020_STATUS7 0x4B
/* Flags for the MAIN register. */
#define RESET_N 1
#define BIAS_PD (1<<1)
#define XOSC_PD (1<<2)
#define FS_PD (1<<3)
#define PD_MODE_1 (1<<4)
#define PD_MODE_2 (1<<5)
#define F_REG (1<<6)
#define RXTX (1<<7)
/* In power up mode, the MAIN register modifies some flags to the following. */
#define SEQ_PD (1<<1)
#define SEQ_CAL_1 (1<<2)
#define SEQ_CAL_2 (1<<3)
// For CC1020_STATUS
#define LOCK_CONTINUOUS 0x10
#define CAL_COMPLETE 0x80
@ -73,8 +88,8 @@
#define PDO (P2IN & 0x01)
// PSEL is on P30 and low active
#define PSEL_ON do { P3OUT &= ~0x01; } while(0)
#define PSEL_OFF do { P3OUT |= 0x01; } while(0)
#define PSEL_ON do { P3OUT &= ~0x01; } while(0)
#define PSEL_OFF do { P3OUT |= 0x01; } while(0)
#define PCLK_HIGH do { P2OUT |= 0x08; } while(0)
#define PCLK_LOW do { P2OUT &= ~0x08; } while(0)
@ -94,14 +109,14 @@
do { IE1 &= ~(URXIE0); } while(0)
#define ENABLE_RX_IRQ() \
do { IFG1 &= ~URXIFG0; IE1 |= URXIE0; } while(0)
do { IFG1 &= ~URXIFG0; IE1 |= URXIE0; } while(0)
#define ACK_TIMEOUT_115 4 // In RADIO_STROKE ticks
#define ACK_TIMEOUT_19 16
#define MHZ_869525 1
const u8_t cc1020_config_19200[41] = {
const uint8_t cc1020_config_19200[41] = {
0x01, // 0x00, MAIN
0x0F, // 0x01, INTERFACE
0xFF, // 0x02, RESET
@ -147,7 +162,7 @@ const u8_t cc1020_config_19200[41] = {
ACK_TIMEOUT_19
};
const u8_t cc1020_config_115200[41] = {
const uint8_t cc1020_config_115200[41] = {
0x01, // 0x00, MAIN
0x0F, // 0x01, INTERFACE
0xFF, // 0x02, RESET
@ -195,9 +210,9 @@ const u8_t cc1020_config_115200[41] = {
/// cc1020 state
enum cc1020_state {
CC1020_OFF,
CC1020_RX,
CC1020_TX
CC1020_OFF,
CC1020_RX,
CC1020_TX
};
/******************************************************************************
@ -205,11 +220,13 @@ enum cc1020_state {
* @{
*/
const u8_t syncword[2] = {0xD3,0x91};
__attribute__((packed))
const uint8_t syncword[2] = {0xD3,0x91};
// header: number of bytes in packet including header
struct cc1020_header {
u8_t length; // header: number of bytes in packet including header
};
uint8_t length;
} __attribute__((packed));
#define PREAMBLESIZE 6
#define PREAMBLE 0xAA
@ -223,7 +240,7 @@ struct cc1020_header {
/// cc1020 receiver state
enum cc1020_rxstate {
CC1020_RX_SEARCHING, // searching for preamble + sync word
CC1020_RX_RECEIVE, // receiving bytes
CC1020_RX_PROCESSING // processing data in buffer
CC1020_RX_SEARCHING, // searching for preamble + sync word
CC1020_RX_RECEIVE, // receiving bytes
CC1020_RX_PROCESSING // processing data in buffer
};