Allow boards to explicitly provide an RSSI offset

This commit is contained in:
George Oikonomou 2016-12-04 00:10:57 +00:00
parent 00944ec677
commit e0e6f82c46

View File

@ -42,6 +42,12 @@
#define SMARTRF_SETTINGS_BOARD_OVERRIDES
#endif
/*---------------------------------------------------------------------------*/
#ifdef SMARTRF_SETTINGS_CONF_OVERRIDE_RSSI_OFFSET
#define SMARTRF_SETTINGS_OVERRIDE_RSSI_OFFSET SMARTRF_SETTINGS_CONF_OVERRIDE_RSSI_OFFSET
#else
#define SMARTRF_SETTINGS_OVERRIDE_RSSI_OFFSET 0x00FB88A3
#endif
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_PROP_RADIO_DIV_SETUP */
static uint32_t overrides[] =
{
@ -103,10 +109,11 @@ static uint32_t overrides[] =
/* Tx: Configure PA ramping setting */
HW_REG_OVERRIDE(0x608C, 0x8213),
/*
* override_phy_rx_rssi_offset_5db.xml
* Rx: Set RSSI offset to adjust reported RSSI by +5 dB
* Rx: Set RSSI offset to adjust reported RSSI
* The board can override this
*/
(uint32_t)0x00FB88A3,
(uint32_t)SMARTRF_SETTINGS_OVERRIDE_RSSI_OFFSET,
/*
* TX power override
* Tx: Set PA trim to max (in ADI0, set PACTL0=0xF8)