Commit Graph

48 Commits

Author SHA1 Message Date
Oliver Schmidt
2c48f3b232 Added compatibility with W5100 shared access.
If the setup of socket 0 to 3 with 4+2+1+1KB is detected then the W5100 is _not_ initialized, otherwise it does set up socket 0 and 1 with 4KB each. Either way socket 0 is used - now with 4KB instead of 8KB as before.
2016-04-05 21:11:19 +02:00
Oliver Schmidt
1639b712bb Removed CC_FASTCALL.
CC_FASTCALL was introduced many years ago for the cc65 tool chain. It was never used for another tool chain. With a798b1d648 the cc65 tool chain doesn't need CC_FASTCALL anymore.
2015-11-01 18:10:17 +01:00
Oliver Schmidt
f348f4feb2 Allow fixup to be repeated.
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable.

Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
2015-07-09 22:43:16 +02:00
Oliver Schmidt
7b3e80a957 Remove received packet(s) to allow to send one.
Behave just like the CS8900A driver: Both the CS8900A and the LAN91C96 dynamically share a buffer for received packets and packets to be send. If the chip is exposed to a network with a lot of broadcasts the shared buffer might fill quicker with received packets than the 6502 reads them (via polling). So we might need to drop some received packets in order to be able to send anything at all.
2015-04-26 14:23:33 +02:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Oliver Schmidt
919b6919a5 Fixed hardware detection.
The previous chip detection was inspired by the old IP65 driver code. For some reason it didn't work as expected. The new code is simpler and based on this statement in the chip datasheet: "The upper byte always reads as 33h and can be used to help determine the I/O location of the LAN91C96."
2014-07-12 11:27:52 +02:00
Oliver Schmidt
a5d7a06027 Enhanced Ethernet drivers.
Made Ethernet drivers easier to consume by assembly programs.
* Replaced function pointers with JMP instructions.
* Provide return values additionally via Carry flag.

Reset Ethernet chips on initialization.
Both for the CS8900A and the W5100 the data sheets just say that
the RESET bit is automatically cleared after the RESET. This may
be interpreted in two ways:
1) There's no need to be afraid of reading the RESET bit as 1 and
unintentionally trigger a RESET by writing it back after ORing in
some other bit.
2) The RESET process isn't complete before the RESET bit hasn't
become 0 again.
It's impossible for me to empirically falsify the latter option
as the drivers are supposed to work on faster machines than the
ones I have access to. And if the RESET process includes things
like oscillators then the time to complete the RESET could differ
even between multiple exemplars of the same chip. Therefore I
opted to presume the latter option.
However that means a non-exsistent chip may cause an infinite
loop while waiting for the RESET bit to be cleared so I finally
added code to detect the presence of the Ethernet chips. There's
a risk of a chip being locked up in a way that makes the detection
fail - and therefore the RESET not being performed. This catch-22
needs to be solved by the user doing a hard RESET.
2014-06-12 22:56:35 +02:00
Oliver Schmidt
f124425ee1 Build static Ethernet drivers directly from source. 2014-06-09 23:14:11 +02:00
Oliver Schmidt
5829bc5159 Adjustment to cc65 change. 2014-05-01 21:32:32 +02:00
Oliver Schmidt
b6c9950b94 Adjust shadow register to full 8kB RX buffer. 2014-02-27 20:23:41 +01:00
Oliver Schmidt
a94e7e63e2 Avoid compiler warnings. 2014-02-01 00:46:57 +01:00
Adam Dunkels
5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Oliver Schmidt
9a48bcf941 Merge pull request #488 from oliverschmidt/master
Avoid access to the address register during auto-increment.
2013-12-03 12:59:45 -08:00
Oliver Schmidt
9cdc6da040 Avoid access to the address register during auto-increment.
It cannot be ruled out that access to the address register triggers
an address auto-increment. Therefore a temporary address register
shadow is introduced to replace the access to the address regsiter.

Additionally there are several minor beautifications.
2013-12-03 21:31:43 +01:00
Adam Dunkels
bb2dcaa057 A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
Oliver Schmidt
1bf5b4380d Saved six more bytes ;-) 2013-11-13 23:32:49 +01:00
Oliver Schmidt
ae1a875881 Added missing fixup & removed wait loop from poll. 2013-11-11 21:03:39 +01:00
Oliver Schmidt
2d7d1b123d Added 6502 driver for WIZnet W5100 in MACRAW mode. 2013-11-09 23:15:20 +01:00
Oliver Schmidt
7c2f3b3911 Saved another byte ;-) 2013-10-03 22:32:12 +02:00
Oliver Schmidt
2263c1aa55 - Optimized LAN91C96 driver for speed and size.
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.

- Introduced a loop for setting the MAC address.

Additional minor fix:

- Properly start self modification with first location.
2013-09-12 23:32:26 +02:00
Oliver Schmidt
ea08635ca4 Optimized CS8900A driver for speed and size.
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.

- Size: Factored out all repeated code into subroutines. Introduced a loop for setting the MAC address.

Additional minor changes:

- Activate frame reception as last step of initialization after CS8900A configuration.

- Properly set internal address bits used by the CS8900A.
2013-09-12 23:32:25 +02:00
Oliver Schmidt
fb1de74dc4 The current cc65 build doesn't require this workaround anymore. 2013-06-28 00:36:33 +02:00
Oliver Schmidt
79bb5ea73f Removed some more old RCS tags from the Contiki source tree. 2013-06-13 15:54:26 +02:00
Oliver Schmidt
74dfff972f Do not reject frames with a length exactly equal to the uIP bufer size. 2013-01-30 23:39:01 +01:00
Oliver Schmidt
1a5e20bc5f Remove tab chars from retro C sources. 2013-01-28 23:43:08 +01:00
Adam Dunkels
944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
Nicholas J Humfrey
1cda3da17e Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory. 2012-02-21 08:33:24 -05:00
adamdunkels
5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
oliverschmidt
55d61d317b Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary. 2010-09-28 23:02:16 +00:00
oliverschmidt
d28865abac Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code. 2010-05-30 10:12:30 +00:00
oliverschmidt
93ff3add1f Use cfs filesystem to allow for specific implementations. 2007-12-23 15:37:28 +00:00
oliverschmidt
102e3e2a24 Make use of fastcall. 2007-12-21 01:13:44 +00:00
oliverschmidt
f55b3cfe0e So we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 17:02:37 +00:00
oliverschmidt
69a16d89c5 Fixed typo. 2007-12-08 21:19:06 +00:00
oliverschmidt
a980f40bf6 Take in account that the C64 Retro Replay clockport needs to be activated in order to work with the RR-Net Ethernet card. 2007-12-08 21:05:48 +00:00
oliverschmidt
45988fdfd0 Fixed LAN91C96 driver. 2007-12-01 20:23:11 +00:00
oliverschmidt
66717d11ba Generic SMSC LAN91C96 driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- ETH64 ($DE10)
- Apple2 LANceGS ($C0x0)
2007-11-30 12:32:07 +00:00
oliverschmidt
b51a680a02 Minor optimization. 2007-11-29 21:56:55 +00:00
oliverschmidt
67af780c93 Made include paths consistent. 2007-11-27 20:54:10 +00:00
oliverschmidt
20824c5603 Make use of global error_exit(). 2007-11-27 20:52:52 +00:00
oliverschmidt
7fc383e100 Minor change in comment. 2007-11-24 12:57:09 +00:00
oliverschmidt
5608e2d451 Minor adjustment to predominant coding style. 2007-11-22 11:41:18 +00:00
oliverschmidt
da44474fd4 Generic Ethernet driver for cc65 targets. The actual hardware driver is loaded as relocatable module. 2007-11-20 21:10:20 +00:00
oliverschmidt
e6e6ea415c Generic Cirrus Logic CS8900A driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- C64 TFE ($DE00)
- C64 RRNet ($DE08)
- Apple2 Uther ($C0x0)
2007-11-19 23:14:14 +00:00
oliverschmidt
9a96dbca03 Moved currently inconsistent files to backyard to clean up for release 2.1 2007-11-19 23:00:33 +00:00
matsutsuka
582a7476d4 *-dsc.c files have been changed to remove forward reference for struct_icon variable, bacause it is strange that this variable is used wholly inside the C source file and declared extern for the forward reference. 2007-09-06 01:36:10 +00:00
oliverschmidt
97681fdada The one and only uip_arch.h resides in core/net. 2007-03-03 09:48:39 +00:00
adamdunkels
c9e808d638 Import of the contiki-2.x development code from the SICS internal CVS server 2006-06-17 22:41:10 +00:00