Commit Graph

129 Commits

Author SHA1 Message Date
Benoît Thébaudeau
a2686e581e cc2538: Add header file for flash CCA page and use it
Create a dedicated header file with all the definitions for the flash lock bit
page and customer configuration area. This avoids duplicating those definitions
in the startup-gcc.c files of all CC2538-based platforms, and this also allows
to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air
firmware update).

The definitions are now complete contrary to what was in startup-gcc.c:
 - Definitions have been added to select the bootloader backdoor pin and active
   level if enabled.
 - Definitions have been added to access the page and debug lock bits. The debug
   lock bit can be used to prevent someone from reading back a programmed
   firmware through JTAG if the firmware binary image has to be confidential,
   which should be combined with a disabled bootloader backdoor.
 - The application entry point is now tied to the beginning of the .text section
   instead of to the beginning of the flash. This allows projects using custom
   linker scripts to place the application entry point anywhere in the flash,
   which can be useful e.g. for on-the-air firmware update.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-05 18:45:51 +01:00
Benoît Thébaudeau
1a696eb123 cc2538: gpio: Clear the power-up interrupts in the port ISRs
The pending GPIO power-up interrupts have to be cleared in the ISRs in order not
to re-trigger the interrupts and the wake-up events.

The power-up interrupts of all pins are cleared for each port in the
corresponding port ISR. This is done after calling the registered callbacks so
that the callbacks can know which pin woke up the SoC. This is done after
clearing the regular interrupt in order to avoid getting a new wake-up interrupt
without the regular interrupt in the case of a new wake-up edge occurring
between the two clears.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-26 22:20:05 +01:00
Benoît Thébaudeau
44a5c76884 cc2538: gpio: Add macros to use GPIO power-up interrupts
The GPIO power-up interrupts have to be configured and enabled in order to be
able to wake-up the SoC from PM1+ upon a signal edge occurring on a GPIO input
pin.

This set of macros allows to:
 - configure the signal edge triggering a power-up interrupt,
 - enable and disable a power-up interrupt,
 - clear a power-up interrupt flag.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-26 22:10:47 +01:00
Benoît Thébaudeau
d2f3795a30 cc2538: Clean up port and pin definitions
Homogenize port and pin definitions naming:
 - PERIPHERAL_FUNCTION_PORT for the port ID,
 - PERIPHERAL_FUNCTION_PIN for the pin ID,
 - PERIPHERAL_FUNCTION_PORT_BASE for the port base,
 - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask.

Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and
deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the
driver from the former definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 15:00:41 +01:00
Adam Dunkels
1ab28e4668 Added missing argument declaration 2013-11-23 15:05:16 +01:00
Adam Dunkels
e95236b642 Added header declarations for cc2538_rf_read_rssi() and cc2538_rf_set_promiscous_mode() 2013-11-23 15:05:16 +01:00
Adam Dunkels
76f2a10c9a Added a function for setting promiscous mode on the CC2538 RF core 2013-11-23 15:05:15 +01:00
Adam Dunkels
473d519926 Added a way to obtain the RSSI from the CC2538 RF core 2013-11-23 15:05:15 +01:00
George Oikonomou
f13af20f12 Merge pull request #409 from ADVANSEE/cc2538-spi
cc2538: spi: Bug fix and various improvements
2013-11-20 06:51:26 -08:00
Benoît Thébaudeau
e8a8870d1d cc2538: spi: Add enable and disable functions
This makes it possible to reduce the power consumption when the SPI is unused.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-20 14:20:50 +01:00
Benoît Thébaudeau
b134e35450 cc2538: spi: Add format configuration options
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-20 14:20:43 +01:00
George Oikonomou
dc05eea3f5 Merge pull request #426 from ADVANSEE/cc2538-rom
cc2538: Add driver for the rom utility function library
2013-11-19 03:09:16 -08:00
Benoît Thébaudeau
1f1b940cb9 cc2538: Add driver for the rom utility function library
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-18 12:38:06 +01:00
George Oikonomou
b10c78f854 Merge pull request #425 from ADVANSEE/cc2538-gpio
cc2538: gpio: Bug fix and various improvements
2013-11-15 13:04:09 -08:00
George Oikonomou
98a1f2dfa9 Merge pull request #408 from ADVANSEE/cc2538-uart
cc2538: lpm: Add registration mechanism for peripherals and use it
2013-11-15 12:57:03 -08:00
Benoît Thébaudeau
680050861c cc2538: gpio: Use accessor macros
Use the GPIO accessor macros instead of copying raw register access code all
over the place. This is cleaner and less error prone.

This fixes the setting of the USB pull-up resistor that worked only by chance on
the CC2538DK because it is controlled by the pin 0 of the used GPIO port.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 19:57:44 +01:00
Benoît Thébaudeau
923f161b7b cc2538: gpio: Add pin read / write and interrupt clear macros
Introduce new useful GPIO macros to:
 - read the levels of some port pins,
 - write the levels of some port pins (pass bit-field value to be set),
 - clear the interrupt flags for some port pins.

These macros are cleaner and less error prone than raw register access code
copied all over the place.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 19:48:24 +01:00
Benoît Thébaudeau
300d2d79ae cc2538: gpio: Fix usage of parameters in macros
The parameters in the GPIO macros were used without being parenthesized. This
could generate wrong values for register assignments in the case of expressions
passed as arguments to these macros.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 19:43:06 +01:00
Benoît Thébaudeau
b8b54a033c cc2538: uart: Fix crippled output occurring upon lpm_enter()
lpm_enter() must not enter PM1+ if the UART TX FIFO is not empty. Otherwise, the
UART clock gets disabled, and its TX is broken.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:24:26 +01:00
Benoît Thébaudeau
f1ca1b742c cc2538: spi: Include spi-arch.h before dev/spi.h
spi-arch.h configures dev/spi.h, so it must be #included first. Luckily, this
mistake did not have any consequence here, but fix it in order to avoid possible
future issues.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:56:40 +01:00
Benoît Thébaudeau
f34731c1a9 cc2538: spi: Do not call SPI_WAITFOREORx() at end of init
If the SSI has never been used and spi_init() is called, then the SSI receive
FIFO is empty and remains so, so calling SPI_WAITFOREORx() at the end of
spi_init() waits endlessly for SSI_SR.RNE to be set. Hence, this call must be
removed in order to avoid a deadlock.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:56:40 +01:00
Benoît Thébaudeau
47d570343e cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:52:10 +01:00
George Oikonomou
e4a454b284 Set peripheral mode for the correct UART TX/RX pins 2013-09-30 14:50:39 +01:00
George Oikonomou
2957d44ff8 Merge pull request #352 from lab11/cc2538-spi-driver
Added SPI driver for CC2538
2013-09-28 13:25:17 -07:00
Brad Campbell
e2af903d05 Added SPI driver for CC2538
This uses the core/dev/spi.h header and implements the spi_init()
function and the various macros for SPI operation. ssi.h contains all of
the register locations and information.

This implementation is not very versatile, mostly because I don't how to
make it flexible in the contiki system. It supports pin muxing for the
four spi pins, but other than that picks sensible defaults.

The SPI macros (like SPI_READ()) are defined in
cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following
includes to your project:

    #include "spi-arch.h
    #include "dev/spi.h"
2013-09-27 17:46:15 -04:00
Brad Campbell
982ca0fb46 Updates CC2538 GPIO
1. Fixes two of the comments to GPIO macros. They were copied but not
updated.
2. Adds SET and CLR macros for controlling GPIO pins.
2013-09-11 21:39:56 -04:00
George Oikonomou
6c6013b898 Make the CC2538 UART driver more configurable
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
George Oikonomou
8b5b2bd4d8 CC2538 Documentation typo and grammar fixes 2013-04-17 15:41:41 +01:00
George Oikonomou
40f49948e6 New Platform: TI CC2538 Development Kit
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00