Commit Graph

149 Commits

Author SHA1 Message Date
nifi
9508d2c4d7 * Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
adamdunkels
49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels
115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels
efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
adamdunkels
9be1a65211 Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable 2010-03-16 18:11:58 +00:00
adamdunkels
b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
adamdunkels
7bab9316da Two major changes:
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt
def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
nifi
2cf0fb9cce Changed to use short address mode with short rime addresses 2010-03-12 14:49:21 +00:00
adamdunkels
4b60301727 Don't set the ack flag for broadcast packets 2010-03-09 20:40:11 +00:00
adamdunkels
17f6b3a324 Simplified the structure of the code 2010-03-09 20:38:55 +00:00
adamdunkels
d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
adamdunkels
edda6dd86c Minor bugfix: don't subtract collisions and deferrals from the number of transmissions 2010-03-09 13:23:58 +00:00
adamdunkels
2c3d3e3d73 Bugfix: handle deferred transmissions correctly (don't count them) 2010-03-09 13:20:08 +00:00
adamdunkels
79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
nvt-se
96eb20d235 forward arguments even if REXMIT is not set 2010-03-04 14:17:43 +00:00
nifi
5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
nifi
0c084b8c68 added random init of sequence number 2010-03-01 13:17:01 +00:00
adamdunkels
410d860a93 Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up 2010-02-28 20:19:47 +00:00
adamdunkels
e6fceb7200 Added MAC-layer return value to indicate that a packet transmission was deferred 2010-02-28 20:18:30 +00:00
adamdunkels
e06acc4525 Prod the watchdog if waiting for along time 2010-02-28 14:15:16 +00:00
adamdunkels
74da90a06b Don't count collisions as transmissions 2010-02-28 10:07:17 +00:00
adamdunkels
b6b4941871 Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute 2010-02-28 08:35:16 +00:00
adamdunkels
ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
nifi
b50d47fb80 added missing function in sicslowmac_driver 2010-02-23 22:45:11 +00:00
nifi
1cfcc8a73a Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed. 2010-02-23 20:42:45 +00:00
nifi
c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels
bb62749de7 Made debug printfs optional 2010-02-23 18:49:58 +00:00
adamdunkels
0ab2ba433f Bugfix: the wrong callback pointer was passed to higher layers. 2010-02-23 18:49:45 +00:00
adamdunkels
ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00
adamdunkels
0b2b7bcdba Removed inadvertedly left-over include file 2010-02-18 23:52:34 +00:00
adamdunkels
e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
2010-02-18 21:48:39 +00:00
adamdunkels
f8c804e28b ntikiMAC: a new radio duty cycling mechanism that uses a combination
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.

ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.

ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
2010-02-18 21:26:15 +00:00
adamdunkels
f5c48751b5 Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef 2010-02-18 21:00:28 +00:00
adamdunkels
2fbf21b2b3 Refactored the phase optimization functionality into a separate module 2010-02-18 20:58:59 +00:00
adamdunkels
75e1c0c8c7 Include contiki-conf.h to let the MAC channel check rate be configurable 2010-02-03 16:45:12 +00:00
adamdunkels
06d17c7e1c Remove unused rtimer code 2010-02-03 16:44:43 +00:00
adamdunkels
e419eb3cc5 Retransmit packet if it didn't receive a MAC layer ack 2010-02-03 01:17:54 +00:00
adamdunkels
d68af249ec Added a MAC layer return value that informs the caller that a packet did not receive a MAC layer acknowledgement 2010-02-03 01:17:32 +00:00
adamdunkels
181213124b Added a configuration option for setting the MAC channel check rate (which must be a power of two). The configuration is independent of the MAC protocol. 2010-02-02 23:28:58 +00:00
adamdunkels
fcf60e9260 Removed the csma_init declaration in the mac_driver struct since it isn't needed and it breaks sdcc 2010-02-02 20:45:58 +00:00
adamdunkels
cc2be0f111 Remove compiler warnings 2010-02-02 16:33:07 +00:00
adamdunkels
1a13d25d33 Revised version of the X-MAC implementation that uses a ctimer instead
of an rtimer for the periodic radio duty cycling. The benefit of this
implementation is that it leaves an rtimer free for user tasks. The
drawback is a slightly higher idle power consumption. This new version
is based on the current rtimer-based X-MAC.
2010-01-31 18:44:23 +00:00
adamdunkels
e4168db633 Bugfix: deallocate queuebuf only if there was no collision 2010-01-31 13:55:36 +00:00
adamdunkels
2ae7ed827c Increase the default X-MAC channel check rate to 4 Hz instead of 2 Hz 2010-01-28 13:40:47 +00:00
adamdunkels
8430dab039 Typecast to fix nightly build problem 2010-01-27 07:36:31 +00:00
adamdunkels
4f3e8d565c Added a simple CSMA (Carrier Sense Multiple Access) mechanism that
works on top of an underlying duty cycling mechanism. The CSMA layer
retransmits packets that could not be sent because of a collision was
detected.
2010-01-25 11:46:44 +00:00
adamdunkels
7ad93e5d18 Added a field to the struct mac interface:
channel_check_interval(). This function returns the interval by which
the duty cycling mechanism checks the radio channel for activity. It
is used by higher layer mechanisms to determine suitable timeouts for
retransmissions.
2010-01-25 11:43:32 +00:00
adamdunkels
743e93e650 Do not remove encounters - there is no need to, as they are only an optimization 2010-01-14 20:14:03 +00:00
adamdunkels
2f105e933a Variable xmac_is_on was used both in interrupt and non-interrupt contexts and needs to be volatile 2009-12-06 23:29:38 +00:00