102 Commits

Author	SHA1	Message	Date
nvt-se	73978e3133	only include sdspi.h if WITH_SDC is on.	2008-03-31 14:33:23 +00:00
nvt-se	acf01a0c58	fixed compilation error.	2008-03-31 14:32:00 +00:00
nifi	f916c7b130	initialize ctimer after initialization of process	2008-03-31 14:01:26 +00:00
nvt-se	067e4c3c06	include contiki-conf.h for type definitions.	2008-03-31 13:48:03 +00:00
nvt-se	f7b3d9fc99	moved files to sd/	2008-03-31 13:45:52 +00:00
nvt-se	fdcc145150	added missing file.	2008-03-31 13:43:34 +00:00
nvt-se	2822ff7ddb	made more conform with contiki indentation.	2008-03-28 23:03:05 +00:00
nvt-se	10cabda581	lock wait function from Michael Baar.	2008-03-28 16:06:28 +00:00
nvt-se	bd8809d35d	print information about the SD card, if existent.	2008-03-28 16:02:01 +00:00
nvt-se	6486460e3f	locking bugfix from Michael Baar.	2008-03-28 15:59:58 +00:00
nvt-se	3fec8ee5e7	synced with newer version by Michael Baar.	2008-03-28 15:58:43 +00:00
nvt-se	d5c8b18fc2	added accelerometer test with moving average.	2008-03-27 13:08:35 +00:00
nvt-se	5631c92416	use three different input channels for the accelerometer.	2008-03-27 13:04:59 +00:00
nvt-se	1d3bae48dd	added sd card support.	2008-02-28 15:49:01 +00:00
nvt-se	2cc0135e35	cleaned up and fixed an error checking problem in the locking code.	2008-02-28 15:11:22 +00:00
nvt-se	a06b85f74b	adjusted uIP parameters.	2008-02-13 15:41:04 +00:00
oliverschmidt	2632f8f937	Removed finally unnecessary cast.	2008-02-10 22:36:36 +00:00
nvt-se	f0891be218	added clear channel assessment timeout. long to begin with.	2007-12-20 14:44:31 +00:00
fros4943	d8f6f03edc	moving radio init to init-net files	2007-12-20 13:43:24 +00:00
fros4943	d0997c2dab	major bugfix: padding synch with zero	2007-12-20 13:36:59 +00:00
nvt-se	abb2731ed7	corrected comparison when bits don't need shifting.	2007-12-20 10:48:01 +00:00
nvt-se	7a6a9e62e4	improved logic.	2007-12-19 13:25:41 +00:00
nvt-se	1f00c20815	state variable must be volatile.	2007-12-19 13:09:01 +00:00
nvt-se	b4a8641dda	removed printf's.	2007-12-18 15:27:43 +00:00
nvt-se	f9d24f0d24	Wake up from sleep in the interrupt when the receiver process is going ... to be polled.	2007-12-18 15:26:25 +00:00
fros4943	d21572da02	configurable port	2007-12-18 11:55:01 +00:00
nvt-se	ab115e4b10	Removed deprecated function.	2007-12-17 20:18:29 +00:00
nvt-se	1566f55e04	use smaller payload buffer size and provision for synchronization word in ... the total buffer.	2007-12-17 20:15:53 +00:00
nvt-se	bcefffb0e7	set ev to valid value.	2007-12-17 18:48:50 +00:00
nvt-se	004143b6b8	set rxlen to zero before enabling interrupts.	2007-12-17 16:37:15 +00:00
nvt-se	2288cdecbb	small cleanup.	2007-12-17 16:23:32 +00:00
nvt-se	2d5f331b34	new line.	2007-12-17 16:20:34 +00:00
fros4943	479d74ce6a	added receiver process outside interrupt	2007-12-17 15:53:57 +00:00
fros4943	7886d51045	removed old dma_init	2007-12-17 15:47:55 +00:00
fros4943	3936e0c275	updated version	2007-12-17 15:47:40 +00:00
nvt-se	5f1ca4ccdf	use synchronous transmission.	2007-12-17 15:26:47 +00:00
nvt-se	2a0351afb4	improved uip support and cleaned up the source.	2007-12-17 13:33:09 +00:00
nvt-se	86ce511469	Separate files for network initialization.	2007-12-17 13:20:54 +00:00
fros4943	4da695ce72	bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise	2007-12-17 11:23:57 +00:00
nvt-se	6a42706847	removed duplicate.	2007-12-17 11:15:21 +00:00
nvt-se	a305e3ccbb	removed lpm_on.	2007-12-17 11:14:28 +00:00
fros4943	3969ea6f9d	not using usb port to program the msb	2007-12-17 11:10:45 +00:00
nvt-se	54bef4bea3	added back initializations that were missing in the previous commit.	2007-12-13 13:10:02 +00:00
nvt-se	665c58fd2a	Contributions from Michael Baar: ... CC1020 o Turns off only after transmission has ended and not in between o Using events for DMA takes too long. It should use a callback when DMA finishes to turn off the transmit mode as early as possible. Core/UART o Added profiling and energest initialization o Changed low-power mode from LPM1 to LPM3	2007-12-13 12:51:38 +00:00
nvt-se	b1d87bf0d3	Removed deprecated rules.	2007-12-13 11:29:12 +00:00
nvt-se	486ea95b4f	Limited support for energy estimation.	2007-12-10 12:49:08 +00:00
nvt-se	46b6ce9193	Conform to the radio_driver interface.	2007-11-18 12:25:22 +00:00
nvt-se	c90a758ac5	Detect if the medium is busy right before sending.	2007-11-12 21:17:47 +00:00
nvt-se	0e4429068b	Added a carrier sensing function.	2007-11-07 15:34:41 +00:00
nvt-se	ee59f1fe34	Use a fresh RSSI value in the read function.	2007-11-07 15:26:00 +00:00