nifi
3c1a7f3bc7
* Added configuration for radio receive buffer size (default Rime packet size)
...
* Added configuration for beep on bad crc
* Changed to drop packet if read buffer is too small rather than truncating data
* Turn off energest-listen during transmission
2009-11-19 18:04:02 +00:00
nifi
c89028a11f
reduced serial line buffer size
2009-11-18 15:34:57 +00:00
nifi
bb0ffe0478
moved rime initialization into rime router so it is easier to switch IPv6 routing module
2009-11-18 13:51:55 +00:00
nvt-se
7a9e9c72a1
switched to new radio return values
2009-11-13 12:38:14 +00:00
nvt-se
b909a62265
Reduced application buffer size for SD and switched parameter in cfs-coffee-arch.c
2009-11-11 14:59:33 +00:00
nvt-se
8c040be133
Changed the name of the declaration of the default block size. Reduced the OCR reading timeout.
2009-11-07 01:05:23 +00:00
nvt-se
7aac2d90fb
specify that energest.h is in the sys directory.
2009-11-06 17:18:47 +00:00
nvt-se
31850d2e29
wait for RX before reading, and ensure that the byte is read out by using a volatile dummy variable
2009-11-06 15:40:15 +00:00
nvt-se
731e1da844
increase the I/O rate and use etimer_restart to maintain a uniform wait time between iterations
2009-11-06 15:11:52 +00:00
nvt-se
f59e89cfb9
Fixed the problem of reads from the SPI where the first byte was sometimes lost.The SPI read function now only generates an idle symbol if there is not a byte
...
already in the reception buffer.
2009-11-06 14:02:59 +00:00
nvt-se
84f2a077de
the return value should be checked against the size of sd_buf instead of buf
2009-11-03 16:18:37 +00:00
nvt-se
9b4cd05e1f
Patch from David Gustafsson: break out SPI functions and fix bug in capacity
...
calculation.
Removed expensive modulo operations from sd_read and sd_write because the block size is now a variable. (nvt)
2009-11-03 15:21:43 +00:00
adamdunkels
d3131e1811
Print link-local IPv6 address when booting the node
2009-10-29 22:10:59 +00:00
adamdunkels
f03caa357e
Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login
2009-10-29 22:10:21 +00:00
nifi
831f16cf61
Fixed COOJA quickstart to run COOJA from current directory
2009-10-28 13:39:15 +00:00
fros4943
99a540fd0d
macro renamed to SPI_IS_ENABLED() to avoid confusions
2009-10-27 15:33:24 +00:00
fros4943
6b36cd9de9
added macro for checking whether SPI is ENABLED
2009-10-27 15:25:02 +00:00
nvt-se
4a0973a95f
specify the number of queuebufs that we want to use in the MSB430 platform by default
2009-10-26 16:11:24 +00:00
kasunch
ca6c8818b1
Two comment fixes
2009-10-22 15:48:20 +00:00
nifi
178548413e
added option to specify JTAG port for programming
2009-10-22 09:27:46 +00:00
adamdunkels
29e8dae88c
Added X-MAC support for IPv6/SICSlowpan nodes, added 802.15.4 default framing to X-MAC
2009-10-19 20:55:52 +00:00
fros4943
bf1920386a
increased log buffer size with uIP SLIP
2009-10-19 18:00:49 +00:00
oliverschmidt
caaa790add
cc65 2.13. comes with secondary linker configs. The 'apple2enh-reboot.cfg' is more or less what was previously engineered as part of Contiki for the Apple2 - now moved into the cc65 distro.
2009-10-18 10:06:44 +00:00
oliverschmidt
18933cc0c3
cc65 2.13. comes with builtin linker configs defining the __STACKSIZE__ symbol as weak. This allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
2009-10-18 09:58:21 +00:00
oliverschmidt
d8aee18f6c
cc65 2.13. allows to
...
- explicitly set 80 column mode
- control exit behaviour from the program itself (instead of requiring a loader variant).
2009-10-18 09:37:37 +00:00
oliverschmidt
d30ccbe81d
cc65 2.13. allows to explicitly set 80 column mode.
2009-10-18 09:35:07 +00:00
oliverschmidt
31eb62821f
cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore.
2009-10-18 09:33:08 +00:00
adamdunkels
79d7c366a3
Rime polite announcements should be used when IPv6 is enabled, and not used otherwise
2009-10-18 07:15:33 +00:00
nvt-se
ed4ee1b5af
continue the test by resetting the etimer even if sd_write returns an error.
2009-10-01 16:40:25 +00:00
nvt-se
3e41c7d564
removed the immaterial sd_get_block_size function.
2009-09-24 12:09:26 +00:00
kasunch
1ee52635c8
1. Changed fuse bits to preserve EEPROM through the chip erase when uploading a new OS image.
...
2. Added a new make rule to erase EEPROM through the chip erase.
2009-09-24 07:09:31 +00:00
kasunch
71b5872045
Added node id restoring at the boot-up.
2009-09-24 06:53:35 +00:00
kasunch
5e1db8b6fa
Added node id restoring and burning functions.
2009-09-24 06:51:22 +00:00
kasunch
f617b77b87
Added the EEPROM starting address of node id.
2009-09-24 06:45:48 +00:00
nvt-se
fc34a4572b
Removed the deprecated COFFEE_DIR_CACHE_ENTRIES parameter.
2009-09-22 16:31:36 +00:00
nvt-se
3b205a8912
removed compiler warning about missing declaration.
2009-09-22 16:27:17 +00:00
nvt-se
19d697fd37
use megabyte unit for printing SD card capacity.
2009-09-22 16:24:03 +00:00
nvt-se
aef32d8144
moved synchronization word definition to the right place.
...
removed memcpy call for a two byte copy. also led to a relocation error
in some versions of the mspgcc linker.
2009-09-22 16:20:39 +00:00
nvt-se
ce32792812
define U1IFG if it is missing.
2009-09-22 16:04:03 +00:00
nvt-se
f698ce2577
Adapted the simple SD test to the new driver and its interface.
2009-09-22 15:37:18 +00:00
nvt-se
12c6dbb7c6
switched to emulated random I/O functions in the SD driver
2009-09-22 15:36:33 +00:00
nvt-se
1fb5841454
introduced WITH_SD parameter. added missing variable.
2009-09-22 15:35:45 +00:00
nvt-se
ea56edc5c2
added a simple driver for using SD devices through the SPI.
2009-09-22 15:20:51 +00:00
nifi
a71cd04144
reconfigured coffee to use larger sectors and no micrologs, changed the architecture specific erase function accordingly
2009-09-21 14:16:32 +00:00
nvt-se
4fd4cb1238
Architecture-dependent Coffee functions for SD cards.
2009-09-17 14:37:32 +00:00
nvt-se
20f449c3e8
micro logs are not needed in SD memory.
2009-09-17 14:19:06 +00:00
nvt-se
519532183f
do not enable Coffee until the new SD driver is in place.
2009-09-17 13:28:41 +00:00
nvt-se
84b0ec7798
Removed unstable SD driver (to be replaced.)
2009-09-17 13:24:49 +00:00
kasunch
4319e8b82e
1. Add MAC address displaying during the booting.
...
2. Set LEDs to turn on at different stages of the booting process.
2009-09-13 21:42:43 +00:00
kasunch
7444c41da9
Adding device driver files for the Dallas Semiconductor DS2401 chip to the CONTIKI_TARGET_SOURCEFILES list.
2009-09-13 21:28:48 +00:00
