Mariano Alvira
25440562e3
include pwm.h in mc1322x.h
2011-09-28 16:25:43 -04:00
Mariano Alvira
9e1612da25
fix typos in uart2 where uart1 was accidentally used.
2011-09-02 14:08:24 -04:00
Jim Paris
166fa97ef6
Fix ordering of UART bitfields
2011-08-31 22:27:47 -04:00
Mariano Alvira
3034ac429d
add adc.h to mc1322x.h
2011-08-01 19:49:13 -04:00
Mariano Alvira
659be7cbcc
set the power to the lowest setting by default
2011-07-21 09:37:44 -04:00
Mariano Alvira
17e7827d43
set an initial default channel --- otherwise the maca isr hogs the
...
CPU.
2011-07-21 09:26:38 -04:00
Mariano Alvira
76a8e49262
add i2c code from Hedde Bosman
2011-07-18 07:11:05 -04:00
Mariano Alvira
6b45e353e1
add uart1, uart2 and a common uart.h include
2011-07-08 18:48:19 -04:00
Mariano Alvira
b79cba9d7f
don't do the autoack delay on RX if promiscuous --- this allows a
...
sniffer to catch 802.15.4 acks.
2011-04-30 15:24:10 -04:00
Mariano Alvira
41d0c7a7da
fix channels 8 and 11, VCODivI table was incorrect.
2011-04-20 21:20:55 -04:00
Mariano Alvira
81a0a0356d
add watchdog timer example
2011-03-22 14:51:08 -04:00
Mariano Alvira
c27e96f1e9
add adc support
2011-03-11 16:25:23 -05:00
Mariano Alvira
b2b18b37fc
add gpio-utils
2011-03-11 16:24:57 -05:00
Mariano Alvira
c7dc2a45a4
add pwm support
2011-03-11 16:24:50 -05:00
Mariano Alvira
c967150038
add rtc support
2011-03-11 15:53:13 -05:00
Mariano Alvira
4d6562a0bc
support ASM encryption module
2011-02-28 18:44:42 -05:00
Mariano Alvira
5012757673
add rx_time parameter and fill with *MACA_TIMESTAMP
2011-02-18 12:35:20 -05:00
Mariano Alvira
c0b21702ed
add a cast to a debug message to remove a warning.
2011-02-18 11:11:31 -05:00
Mariano Alvira
a4ef14f204
strip cvs style keywords from everything
2011-02-12 18:12:45 -05:00
Mariano Alvira
e951e350df
print status messages with DEBUG_MACA
2011-02-12 15:34:21 -05:00
Mariano Alvira
0058fdc824
fixes to remove warnings when building with DEBUG_MACA
2011-02-12 15:33:19 -05:00
Mariano Alvira
7c7864eae2
add autoacking
2011-02-12 15:29:11 -05:00
Mariano Alvira
377f849a02
moved timer.c and .h into tmr.c and .h so that these names don't
...
conflict with the timers in Contiki.
2011-01-17 10:10:38 -05:00
Mariano Alvira
e4f644f7b1
fix a race condition regarding advancement of the softclock. Without
...
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 07:41:44 -05:00
Mariano Alvira
a27dde6d17
add timer setup routines
2010-11-21 17:05:49 -05:00
Mariano Alvira
3ec4b267fc
use stdint.h instead of custom types.h
...
stdint.h is more portable across compilers
2010-11-10 15:52:17 -05:00
Mariano Alvira
43d23d4764
update ring_osc_on and _off to the new bit structs
2010-11-06 22:12:46 -04:00
Jim Paris
1b4de5d8e7
Add gpio_set and gpio_reset
...
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-10-16 13:28:20 -04:00
Jim Paris
e6bd2a1318
Name the GPIO structure so we can set multiple bits at once
2010-10-16 13:28:20 -04:00
Jim Paris
76563958fe
Add the disable_int({}) macro
...
This is similar to safe_irq_enable and disable
2010-10-16 13:27:20 -04:00
Jim Paris
03293b60ad
Fix a makefile dependency with libraries
...
Using the implicit rules for libraries leads to problems if one of the
objects fails to build, but the others are still OK. Just make all
library rules explicit to avoid this.
2010-09-28 16:01:15 -04:00
Jim Paris
6b4d6a9ade
Use a variable for all target objects
...
Instead of specifying them individually. This lets included makefiles
(like my audio/Makefile.include) append objects.
2010-09-28 02:54:23 -04:00
Jim Paris
c7c79fc9b4
Add TMR_ADDR helper
2010-09-27 19:32:10 -04:00
Jim Paris
9cd46dfd4a
Add some useful timer macros
2010-09-27 17:30:02 -04:00
Jim Paris
ac2cac1e1d
Register definitions: get rid of some macro magic that doesn't help much
...
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-09-26 16:05:12 -04:00
Jim Paris
bf94b6d3bd
Add structure-based ITC access
2010-09-26 15:59:11 -04:00
Jim Paris
920954f398
REF_OSC is a 32-bit number, not 64-bit number
2010-09-25 23:16:59 -04:00
Jim Paris
2f52fdd156
Add cal_isr() support
2010-09-25 22:51:19 -04:00
Jim Paris
6c93b8fb0b
Add structure-based CRM definitions
2010-09-25 22:40:40 -04:00
Jim Paris
9b6f648efb
Add macro to help compute TMR.ENBL values (useful when using #defined
...
values to represent timers)
2010-09-25 17:16:12 -04:00
Jim Paris
d6adce955c
Add pin definitions for each timer, they're fixed
2010-09-25 15:33:53 -04:00
Jim Paris
7fb074c060
Add structure-based GPIO register definitions
2010-09-24 16:29:43 -04:00
Jim Paris
1a014bab1b
Add structure-based timer register definitions
2010-09-24 16:29:43 -04:00
Jim Paris
0a41939407
Makefile cleanup.
...
This is an attempt to fix and cleanup all of the rules, and get rid of
some of the recursion. We still need to invoke make several times
when we're building for more than one board, and some things can get a
bit weird when that happens, but it should generally work. A single
BOARD=foo build should be fully correct, now.
I attempted to keep things compatible, so existing Makefiles that
include libmc1322x/Makefile.include should still work correctly.
2010-09-24 16:29:43 -04:00
Jim Paris
be25b73b8e
Add missing type for TMR0_COMP2
2010-09-18 17:37:06 -04:00
Mariano Alvira
36d0b2708d
get LQI of received packets
2010-08-18 14:55:50 -04:00
Mariano Alvira
de64b18aca
Fix the CNTR defines.
...
Thanks to Ruslan for finding this.
2010-08-16 10:30:15 -04:00
Mariano Alvira
7f6c99cf9b
increase the reception time now that tx_packet will advance the timer
...
as necessary.
2010-07-14 14:45:14 -04:00
Mariano Alvira
e60190eb11
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x
2010-07-14 14:01:54 -04:00
Mariano Alvira
7d60dd7a6d
in tx_packet, force an interrupt if the maca isn't doing anything so
...
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-14 13:59:28 -04:00
