Commit Graph

147 Commits

Author SHA1 Message Date
Jens Dede
43fb479c9d Fix broken include 2016-05-02 18:57:48 +02:00
Nicolas Tsiftes
862e43d9b0 Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy
dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Antonio Lignan
934cdbacca Adapted the ADXL345 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc Removed unused blocks and made functions static 2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225 Adapted the TMP102 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Atis Elsts
d79ce957a1 Adaptive time synchronization for TSCH 2015-12-07 11:51:41 +01:00
Simon Duquennoy
20c97367a9 Adding definitions required for TSCH to the sky and z1 platforms 2015-12-04 15:21:53 +01:00
Antonio Lignan
27fd1a5eb8 Updated RE-Mote revision A support and cleaning up Zolertia platforms 2015-11-24 21:15:33 +01:00
Simon Duquennoy
fbd78a7e3b Merge pull request #1293 from simonduq/pr/fix-warnings
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
Antonio Lignan
6037e269a8 Merge pull request #1336 from sumanpanchal/z1-uart0-dma
Zolertia Z1: Direct memory access using UART.
2015-11-02 08:47:08 +01:00
suman_panchal
35cc40563e Zolertia Z1: Direct memory access using UART. 2015-10-31 11:45:13 +05:30
Adam Dunkels
c1ed924c67 Spell fix in function name 2015-10-20 10:11:38 +02:00
Atis Elsts
2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Simon Duquennoy
db1635cf3c Z1: configure SFD timestamp with flag CC2420_CONF_TIMESTAMP, for consistency the Sky platform and with cc2420.c 2015-09-01 10:03:44 +02:00
Simon Duquennoy
34280338ac Z1: init random seed 2015-09-01 10:02:35 +02:00
Pablo Corbalán
b1c3e929c5 Remove old unused light drivers 2015-08-04 20:39:09 +01:00
Matthieu Baerts
78b6b50194 Z1: tmp102: simple: fixed wrong cast
When using this code:

    (int8_t)tmp102_read_temp_x100() / 100

Only the first value is casted into a int8_t type.

tmp102_read_temp_x100() returns the temperature in Celcius * 100. Most of
the time this value will be lower than -2^7 and higher than 2^7 (+/- 1.27°C).

The cast is not needed but a comment about this implicit cast has been added.
2015-05-22 18:15:26 +02:00
George Oikonomou
7238a1628f Merge pull request #1004 from alignan/z1-reed-sensor
Added Reed Sensor driver, example, and minor fix to the SHT25 sensor driver
2015-03-30 15:05:05 +01:00
Antonio Lignan
b9334a3b0e Added Reed Sensor driver and example 2015-03-30 10:30:09 +02:00
Gaëtan Harter
d0232bb20d Remove unused UIP_CONF_ND6_ defines in platforms
UIP_CONF_ND6_MAX_PREFIXE
  UIP_CONF_ND6_MAX_DEFROUTERS
2015-03-24 13:09:29 +01:00
Gaëtan Harter
697d8c0d23 Remove siclowpan compressions define in platforms
Several platforms defined compressions modes values:

    SICSLOWPAN_CONF_COMPRESSION_IPV6
    SICSLOWPAN_CONF_COMPRESSION_HC1
    SICSLOWPAN_CONF_COMPRESSION_HC01

instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
2015-03-24 11:40:32 +01:00
Gaëtan Harter
60719b8239 Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC 2015-03-24 11:18:25 +01:00
Antonio Lignan
64fd000e5d Removed duplicated condition in sht25 configuration 2015-03-11 14:25:23 +01:00
Antonio Lignan
1af29a5beb Added SHT25 sensor 2015-03-10 15:33:58 +01:00
Nicolas Tsiftes
277dc8e174 Merge pull request #826 from alignan/fix_octal
Remove leading zeros from node id
2015-02-11 22:35:02 +01:00
Simon Duquennoy
c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
kkrentz
7b63217a32 ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC 2014-11-25 04:56:09 -08:00
Antonio Lignan
e8c49dd29e Remove leading zeros from node id 2014-11-20 14:48:28 +01:00
Antonio Lignan
ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes
0d39ee96ad Merge pull request #820 from alignan/serialnum_as_nodeid
Use the Z1 product ID as MAC/Node ID if no value is found in XMEM
2014-10-20 11:38:11 +02:00
Nicolas Tsiftes
27cde1ff81 Merge pull request #824 from alignan/fix_warnings
Warning fixes
2014-10-20 11:16:36 +02:00
Antonio Lignan
cceb97059c Use the Z1 product ID as MAC/Node ID if no value is found in the XMEM 2014-10-20 10:36:49 +02:00
Antonio Lignan
c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
Adam Dunkels
d891d11324 Merge pull request #557 from kkrentz/llsec-integration
Integration of Link Layer Security
2014-10-08 15:45:46 +02:00
Antonio Lignan
5bbb0cabbc Added battery capability to Z1 platform 2014-10-08 11:53:09 +02:00
Antonio Lignan
343a3d3f7b Added missing radio capability define to Z1 platform config 2014-09-24 11:42:55 +02:00
kkrentz
2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
kkrentz
c6a98f2968 CC2420: Turned SPI macros to functions and removed redundant AES API 2014-08-05 05:07:06 -07:00
kkrentz
c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Antonio Lignan
5467674fcc Merges Z1SP into Z1 platform 2014-07-04 10:41:05 +02:00
Antonio Lignan
3d64b80e40 Added flags to enable 20-bit support from msp430-gcc 4.7.x 2014-06-17 12:55:08 +02:00
Adam Dunkels
45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels
824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels
8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels
b02104e4c4 Add the sht11 device driver module to the z1 platform 2014-01-26 23:20:36 +01:00
Adam Dunkels
4cfe6c4a5e Moved the sht11 driver to its own module 2014-01-26 23:20:30 +01:00
Adam Dunkels
d91bab9104 Include a basic set of modules 2014-01-26 23:20:28 +01:00