Commit Graph

443 Commits

Author SHA1 Message Date
Niclas Finne
9d261eec56 Use NETSTACK_RDC_* instead of NETSTACK_CONF_RDC_* 2012-01-09 18:06:30 +01:00
Adam Dunkels
f88a1e394b Made collect retransmissions and broadcast announcements timers depend on the rdc wakeup rate 2011-12-09 08:18:22 +01:00
Joakim Eriksson
5281e7c59c made linkable with IAR linker - avoiding multiple defs of rime_sniffer, etc 2011-11-08 11:57:17 +01:00
nvt
942ba1f7bd Removed const qualifier to conform with the rest of the Rime interface. 2011-09-05 22:05:41 +02:00
Niko Pollner
84105f4e47 Improved multihop/mesh route discovery.
Packetbuffer is now saved before route discovery and resent when a
route is found.

This solves the following problems:
- First packet sent to a certain node is corrupted.
- Packet to be forwarded that triggers route discovery is lost.
2011-09-05 21:27:38 +02:00
Nicolas Tsiftes
6749281a87 Rediscover lost routes when forwarding packets. Also refresh route entries when sending packets through them. Patch from Jaroslav Meduna. 2011-06-23 14:45:11 +02:00
Niclas Finne
154f971b2b collect_send() should return 0 if the packet could not be enqueued to be sent 2011-06-07 19:45:41 +02:00
Adam Dunkels
dfaf4afc8e Rime sniffers must be called for all transmissions, even if they failed, to get energy attribution right. This means that rime output sniffers now also must take the MAC transmission status as an argument. 2011-05-02 15:06:34 +02:00
Zhitao He
cae8ef206a fixed excessive retransmissions of junk packets after runicast timeout
fixed stuck packet ID for next packet after runicast timeout
2011-04-27 19:12:46 +02:00
Lionel Debroux
5cb49e8b07 Several compiler warning fixes:
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
     * sky: fix a couple pointer target signedness warnings;
     * core: fix several signed/unsigned comparison warnings;
     * framer-802154: "const static" -> "static const" to fix compiler warnings;
     * core: comment or remove unused variables and function definitions.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
2011-02-20 19:28:14 -05:00
adamdunkels
4b4b8fad56 More recent packet entries. Allow 4 queue entries to be dedicated to generated packets. 2011-01-18 16:05:53 +00:00
adamdunkels
81d23a3a36 Minor bugfixes pertaining to queue handling: if a packet was explicitly dropped, the packet would later be acknowledged despite it never being received; added a limit on how many queue entries that can be used for packets that are being forwarded, to allow for originated packets even if the forwarding queue is filled. 2011-01-10 15:10:43 +00:00
adamdunkels
70f9f075a0 Safeguard against NULL arguments 2011-01-10 15:08:52 +00:00
adamdunkels
148bd60fe1 Bugfix: the defensive retransmission timer setting must be made before the packet is transmitted, otherwise the retransmission timer will always be for the defensive retransmit 2011-01-09 23:49:27 +00:00
adamdunkels
50a3e6ea23 Increased the max ETX to allow for longer paths even with the initial conservative ETX estimate; made collect use announcements by default 2011-01-09 23:48:33 +00:00
adamdunkels
acf45ec648 Bugfix: memory wasn't freed when a neighbor was dropped from the list. Also increase the max age to 180 minutes to allow for regular beacons to refresh the neighbor before it is dropped. 2011-01-09 21:20:05 +00:00
adamdunkels
90dc0ceebf Replaced default link estimator with an exponential weighted moving average, which reduces memory consumption per neighbor. 2011-01-09 21:14:22 +00:00
adamdunkels
4e91d9303e Added safeguard timer if the MAC layer would fail to call back after transmission. 2011-01-09 21:13:20 +00:00
dak664
322d835fee Fix avr-gcc compiler warnings 2010-12-18 22:12:53 +00:00
adamdunkels
4914739e5d Revived the timesynch module, which has been switched off since the introduction of the new radio API after Contiki 2.4. The new code uses explicit timestamp messages instead of piggybacking timestamps on every transmission. It is also significantly better in terms of exactness. 2010-12-16 22:47:38 +00:00
adamdunkels
10fb99a89d Reduced the value of the max depth, so that a count-to-infinity loop will not count too long before hitting the maximum value. This is important when a network loses its sink, so that packets are not forwarded around the network for ever. 2010-12-16 22:46:34 +00:00
adamdunkels
19e930e6f2 Changed the behaviour of retransmissions to work better with the in-order CSMA code. The retransmission timer is now set when the packet is known to be sent by the MAC layer. 2010-12-16 22:45:15 +00:00
dak664
240d478c1f Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME 2010-12-14 22:14:33 +00:00
adamdunkels
8f745a6ea6 Added a function for obtaining the current parent 2010-11-06 14:32:10 +00:00
adamdunkels
677575fc8c Rewrote proactive link estimator to be invoked randomly instead of triggered by an empty queue; this makes network bootups because nodes are not synchronized 2010-10-28 15:36:02 +00:00
adamdunkels
9ecc0437f4 Left-over debug printf removed 2010-10-25 12:25:39 +00:00
adamdunkels
77ecfb0366 Rewrote parts of the retransmission logic so that collect is robust against the situation where the MAC layer will fail to callback after a packet has been transmitted. 2010-10-24 21:08:19 +00:00
adamdunkels
5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
adamdunkels
34cba78ca8 Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change 2010-10-19 07:34:29 +00:00
oliverschmidt
2f89e69ff7 Fixed build for platforms which use the default value for QUEUEBUF_NUM. 2010-10-12 19:51:28 +00:00
adamdunkels
020da4e8ba Added a function for obtaining beacon intervals 2010-10-11 23:44:24 +00:00
adamdunkels
ec716ea62d Do not reduce transmission interval, unless explicitly told so with the bump flag 2010-10-11 23:43:01 +00:00
adamdunkels
37adf130b4 Rewrite of the congestion logic. A node now report it being congested
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.

Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
2010-10-11 23:42:01 +00:00
adamdunkels
d821ba5e22 Added a lifetime for link estimates: if they are too old, they are
reset so that a new probing period can produce more up-to-date
estimates. Added a congestion mechanism whereby a neighbor can be
marked as being congested for a period of time, during which the ETX
for the neighbor will be artificially inflated.
2010-10-11 23:38:46 +00:00
adamdunkels
5eb4a0fe8d Rewrote the initial link estimate logic: link estimates are now
computed only over the actual samples, not over the entire
buffer. Also, the initial link estimate is much more conservative now
(16 transmissions) to favor links that have been probed, and which
therefore are likely to have better ETXs.
2010-10-11 23:34:02 +00:00
adamdunkels
0cabe483c3 Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection. 2010-10-07 15:52:28 +00:00
adamdunkels
ad35c54473 Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value 2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb Turned the DRAW_TREE debug flag off by default 2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53 Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets. 2010-10-04 20:27:50 +00:00
adamdunkels
40583fe112 Removed the polite announcement code, since it was not used, and enabled the broadcast announcement code by default. Increased the default intervals for broadcast announcements. 2010-10-03 20:10:22 +00:00
adamdunkels
605392522f Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them. 2010-10-03 20:08:44 +00:00
adamdunkels
d0579c8a81 Cleaned up the collect neighbor management code 2010-10-03 20:07:10 +00:00
adamdunkels
b23a364397 rtmetric values should always be computed as 16-bit values 2010-10-03 20:06:25 +00:00
adamdunkels
32ba90ea4c Bugfix: make sure that neighbor exists before attempting to update tx
count.
2010-09-28 06:53:02 +00:00
adamdunkels
eed22a6f3c A number of changes to the collect code:
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
2010-09-22 22:08:08 +00:00
adamdunkels
2cae71e89b Added a function for obtaining the link estimate and rtmetric for a neighbor 2010-09-22 22:04:55 +00:00
adamdunkels
46b2451969 Made the initial link estimate explicit 2010-09-22 22:03:21 +00:00
adamdunkels
18e31f33b9 Minor tweaks. Removed debug output from CVS. 2010-09-14 06:48:36 +00:00
adamdunkels
591766e663 Significant improvements to the Collect protocol:
* Loop detection and untangling. Now uses in-band loop detection that
  works.

* Link quality estimation. Now starts with a conservative /
  pessimistic estimate for new links.

* Retransmissions. MAC layer and network layer retransmissions are now
  decoupled.

* Loss handling. Deals better with losses now.

* Concurrent applications. Each connection now maintains its own
  neighbor table with separated cost to sink estimates for each
  connection.
2010-09-13 13:28:14 +00:00
adamdunkels
4e0744954a Rewrite of important parts of the Collect logic: link estimation
calculation and parent selection.  This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
2010-09-08 19:21:45 +00:00