Joakim Eriksson
d8e54ca585
fixed for compilation with IAR compiler
2011-04-06 20:14:30 +02:00
Lionel Debroux
5cb49e8b07
Several compiler warning fixes:
...
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
* sky: fix a couple pointer target signedness warnings;
* core: fix several signed/unsigned comparison warnings;
* framer-802154: "const static" -> "static const" to fix compiler warnings;
* core: comment or remove unused variables and function definitions.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
2011-02-20 19:28:14 -05:00
adamdunkels
cea299d79a
Call upper layers even if packet reception failed - this allows the RDC layer to shut off the radio even if a malformed packet was received.
2011-01-09 21:09:28 +00:00
adamdunkels
d267b5ca94
Re-added timestamp support for outbound packets that was removed when switching to the new radio API
2010-12-16 22:40:52 +00:00
adamdunkels
433d42e170
Bugfix: if the cc2420_cca() function wasn't able to turn on the radio properly, it should turn it off again if it was off before.
2010-12-05 00:14:24 +00:00
nifi
e242fb28bf
Reverted radio API change in CC2420 (not yet fully integrated with Contiki core)
2010-09-23 08:26:06 +00:00
adamdunkels
40ee35e8c8
Rewrote all busy waits with a new macro, which has a built-in timeout to ensure that busy waits won't hang the CPU
2010-09-22 22:01:53 +00:00
nifi
3e6113be72
removed debug output
2010-06-30 09:03:20 +00:00
nifi
49a2ca6b1e
Fixed naming of CC2420 macros
2010-06-24 09:28:38 +00:00
joxe
f7a82a9145
split SPI code into generic and CC2420-related and renamed constants in CC2420
2010-06-23 10:15:28 +00:00
joxe
bc398ca546
removed platform dependent loop-count from cc2420 - moved to platform config instead
2010-06-21 19:48:00 +00:00
joxe
a5d7b197eb
added support for the Z1 platform and its 8Mhz
2010-06-21 19:09:35 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
nifi
14b1bb9f57
Fixed to only use leds when DEBUG is set
2010-04-20 11:41:16 +00:00
adamdunkels
3670fac618
Bugfix: timing fixed
2010-04-08 18:23:24 +00:00
adamdunkels
be117afe04
After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood!
2010-04-04 07:49:30 +00:00
adamdunkels
a637ddaf4e
Flush the rxfifo when turning off the radio instead of when turning it on. This seems to fix a bug that was seen in mspsim and seemed to appear on real hardware too.
2010-04-03 16:01:00 +00:00
adamdunkels
c9ca5d61e2
Rewrote the pending_packet() function to check the FIFOP pin instead of the 'pending' variable - works must better on real hardware and is now supported by the latest mspsim
2010-03-31 19:08:56 +00:00
adamdunkels
5e7f99a2c0
Reverted the removal of the code that checked the FIFOP pin before reading a packet - checking FIFOP is the correct way to do it. Also added TXONCCA for now, including new radio.h return values to indicate a link-layer collision.
2010-03-30 23:00:05 +00:00
adamdunkels
a3a8c0e179
Safety check: only try to read a packet if it was preceeded by an interrupt (which sets the pending flag)
2010-03-19 13:18:53 +00:00
adamdunkels
67b0170a43
Bugfix: don't care about FIFOP when reading a packet; if the radio rx had been turned off before a packet was read, FIFOP would be zero and the packet would be trashed
2010-03-16 18:10:09 +00:00
adamdunkels
0035a70537
Reworked the locking code, which seems to fix a few bugs caused by the interaction with contikimac. Contikimac performs a CCA check in a preempting rtimer, which requires underlying code to properly call the GET_LOCK() macro. This fix seems to solve most problems, but there may be others left.
2010-03-14 22:45:20 +00:00
joxe
1214b1fa40
made cc2420 panid and short address not dependent on endianness
2010-03-09 15:45:29 +00:00
adamdunkels
cc7d3ae142
Reset CCA mode to default. Make sure that the radio gto switched on when reading RSSI; otherwise node will reboot because of watchdog
2010-03-09 13:18:16 +00:00
adamdunkels
b9827d2b36
Bugfix: didn't correctly reset the pending flag when a packet was read from the radio
2010-02-25 16:06:44 +00:00
adamdunkels
1ee32c3074
Removed non-functional time synchronization code; added some experimental code for CCA checks (enabled CCA mode 1, a temporary development function for setting the CCA threshold); enable the possibility to switch off radio even if a packet is currently arriving
2010-02-23 18:24:49 +00:00
adamdunkels
0b2b7bcdba
Removed inadvertedly left-over include file
2010-02-18 23:52:34 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
adamdunkels
fab672c7ba
Reverted the FIFOP->FIFO change; it didn't work :(
2010-01-14 23:32:05 +00:00
zhitao
93c748cc74
Bug fix for mysterious packet loss : check FIFO pin instead of FIFOP pin for any unread RX FIFO data;
...
Added protection of packet timestamp across interrupts. Note that race condition can still occur as interrupts and self-scheduled reads of the RX FIFO interleave in certain unusual patterns. More investigation is needed.
2009-12-11 18:32:54 +00:00
fros4943
9cc57c4324
generic radio return values
...
+ minor bug fix: SFD may go high without transmission starting (very seldom)
2009-11-13 10:07:53 +00:00
adamdunkels
8745235a79
Minor codestyle fix
2009-09-09 21:07:42 +00:00
nifi
c81dbb6c89
Fixed problem with the radio driver changing transmission power to max when not specified at transmission. Also fixed bug where the lock was released when setting the transmission power.
...
Thanks to Djamel Djenouri and Marcus Lundén for identifying the problem.
2009-08-19 15:05:05 +00:00
fros4943
18a98bb573
bug fix: we need to explicitly turn off the cc2420 listen mode after a packet transmission
2009-08-19 12:00:04 +00:00
joxe
0c8b200987
added autoack configuration for CC2420 and reversed long ieee address for address recognition
2009-07-28 22:24:53 +00:00
adamdunkels
92862ad2a5
Increased the number of iterations for ugly-hack-loop that checks if a transmission has started, to accommodate a faster CPU speed on the MSP430
2009-04-29 11:38:50 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
nifi
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
adamdunkels
6a460fecdd
There is problem with the CC2420 driver: under high traffic load the packets often get mangled in the receive FIFO. Not sure why this happens or how to best prevent it. As a temporary workaround, I've added an additional CRC16 check to the incoming packets. This eats two bytes from each packet, but at least protects against the erroneous packets we've seen quite a few of lately. The reception code was also cleaned up, which resulted in a smaller code size.
2008-08-26 21:44:03 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
39abed8672
Moved old CC2420 driver to the backyard
2008-02-24 22:29:08 +00:00
bg-
70ddc0f27e
* If we detect a RXFIFO overflow schedule a poll of the device driver.
2007-07-30 14:54:49 +00:00
bg-
8f0d9aab89
* Change max life of neigbour entries from 60 to 30 seconds by
...
changing the time unit (quanta) from 4 to 2 seconds.
2007-06-28 15:08:53 +00:00
bg-
08d547780c
* Some extra delay when broadcasting to break potential symmetries.
2007-06-01 14:37:02 +00:00
bg-
81b684414d
* Changed implementation for dealing with retransmissions to be
...
strictly event driven. The old implementation was rather process
like and the new one is still implemented as a process.
2007-05-31 10:15:57 +00:00
bg-
1009c3fabf
* Literal constants REMOTE_*.
2007-05-21 14:24:51 +00:00
bg-
34b1d02607
* Need to track if this was the incoming interface.
2007-05-08 08:27:34 +00:00
