Commit Graph

1408 Commits

Author SHA1 Message Date
fros4943
bc0ea1f81d bug fix: dag pointer may be NULL 2010-05-07 13:51:34 +00:00
joxe
cd5dfa9692 added const for the uip_buf pointer for more efficient and smaller uip code and fixed same construct for the sicslowpan code 2010-05-05 13:07:45 +00:00
nvt-se
e4187b2fc8 Made pointers constant and thereby reduced the code size slightly. 2010-05-05 12:35:39 +00:00
nvt-se
361e210751 Improvements to style and commentary. 2010-05-04 22:55:32 +00:00
joxe
01881f92a8 added missing include 2010-05-04 14:41:55 +00:00
joxe
790819e701 allocate uip_buf as uint32_t to avoid risk for unaligned uip_buf on 32 or 16 bit architectures 2010-05-04 09:19:41 +00:00
joxe
7d235841b3 always include the RPL route state to allow compilation of rpl code 2010-05-03 14:12:03 +00:00
nifi
6c86398778 Added check to not copy or create too large packets 2010-05-02 14:59:11 +00:00
nifi
a04372adc4 Fixed conversion of packetbuf address type to address index and corrected return value 2010-05-02 12:21:34 +00:00
joxe
f72bd5572c added initialization of RPL 2010-05-01 13:04:31 +00:00
joxe
0531d9bd82 moved RPL routing state struct into uip-ds6 2010-05-01 12:02:25 +00:00
nvt-se
9a4a9b9437 Removed return value in function that should not return a value. 2010-04-30 23:13:58 +00:00
nvt-se
ecada2d1ac *** empty log message *** 2010-04-30 23:10:45 +00:00
nvt-se
b8a3a4109e Adjusted the code so as to remove compilation warnings. 2010-04-30 22:18:12 +00:00
nvt-se
b822dbb25e Addressed compilation warnings. 2010-04-30 15:04:47 +00:00
nvt-se
4106f4d798 Increased minimum DIO interval from 1024 ms to 4096 ms in order to more calm in duty-cycled networks. 2010-04-30 15:03:55 +00:00
joxe
168a65d989 added ContikiRPL - an implementation of IETF ROLL RPL 2010-04-30 13:43:53 +00:00
joxe
167b0d636e added icmp_send function and moved rpl input function signature 2010-04-30 13:22:21 +00:00
joxe
dc1a5f70ff added uip-debug utilities 2010-04-30 13:20:57 +00:00
nvt-se
7e0e2fe284 Removed obsolete rime-route code for IPv6 2010-04-30 12:43:37 +00:00
joxe
cc9914a4f3 fixed uip to use UDP_BUF instead of TCP_BUF when setting udp ports - minor cleanup 2010-04-30 08:46:27 +00:00
adamdunkels
3d10dedecf Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages. 2010-04-30 07:33:51 +00:00
adamdunkels
0859d4b95f Avoid turning off the radio in the middle of a packet reception 2010-04-30 07:32:39 +00:00
adamdunkels
e606c674c2 Rewrote LPP so that it uses 802.15.4 headers. A number of bugfixes with respect to alignment. Avoid turning off the radio in the middle of packet reception. 2010-04-30 07:31:44 +00:00
adamdunkels
55b6129bd2 Debug printout fix 2010-04-30 07:29:31 +00:00
adamdunkels
e523c36cdf Removed the (unused) header packet of the queuebuf. Added a function for accessing address attributes in the queuebuf 2010-04-30 07:29:08 +00:00
adamdunkels
3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
adamdunkels
798f1c63bd Make it possible to receive multicast UDP packets 2010-04-30 07:19:33 +00:00
adamdunkels
a1f69138d1 Avoid adding elements twice 2010-04-30 07:18:24 +00:00
fros4943
18e5718c97 avoid freeing queuebuf multiple times, and free buffer after cancelling connection 2010-04-27 13:08:55 +00:00
fros4943
12b6f35ce7 PRINTF()ed debugging output 2010-04-27 12:56:35 +00:00
nifi
85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi
875ad7ffda Fixed to not change the header if the header allocation fails 2010-04-26 22:05:40 +00:00
nifi
b26f45a35b code cleanup 2010-04-26 17:55:11 +00:00
nifi
d761b6e89a Added MAC header to handle padding 2010-04-26 17:46:21 +00:00
fros4943
ce1374087b allow elf loader memory configuration at compile time 2010-04-26 14:02:07 +00:00
nifi
14b1bb9f57 Fixed to only use leds when DEBUG is set 2010-04-20 11:41:16 +00:00
nvt-se
f9ca4a546d Introduced append-only mode for systems with little available code space left, but which require basic FS support. Removes about 1.5kB ROM when the mode is enabled, i.e., COFFEE_CONF_APPEND_ONLY=1 2010-04-12 13:20:55 +00:00
nvt-se
2e5d97366a ensure matching format and type in debug printf 2010-04-09 16:21:07 +00:00
adamdunkels
3670fac618 Bugfix: timing fixed 2010-04-08 18:23:24 +00:00
adamdunkels
f2bf8965d5 MAC sequence number attribute 2010-04-08 09:46:30 +00:00
adamdunkels
91ff8574ad Improved handling of duplicate packets 2010-04-08 09:32:56 +00:00
nvt-se
ac4ba199bc Turn off DEBUG mode by default. 2010-04-06 21:37:54 +00:00
anthony-a
694e1498f4 merge change from branch into mainline. <fingers crossed> 2010-04-06 19:10:21 +00:00
nvt-se
75dd41601b Added a macro for checking if an address is link local. 2010-04-06 16:47:18 +00:00
adamdunkels
497111bcc9 Added an optional rate limit for broadcast transmissions 2010-04-06 11:57:43 +00:00
adamdunkels
e06a30fdb0 Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off 2010-04-05 19:28:07 +00:00
adamdunkels
c68ee6e577 Bugfix: memory from the wrong memb was freed. 2010-04-04 21:02:09 +00:00
adamdunkels
a4c328785a Small timing tweaks 2010-04-04 21:01:24 +00:00
adamdunkels
62039a530d Removed non-existant cooja-debug.h include 2010-04-04 12:31:47 +00:00
adamdunkels
7d6ff0289e Fiddled more with the timing: the phase seems stable now at least. Still bugs left though... 2010-04-04 12:28:29 +00:00
adamdunkels
be117afe04 After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood! 2010-04-04 07:49:30 +00:00
adamdunkels
a637ddaf4e Flush the rxfifo when turning off the radio instead of when turning it on. This seems to fix a bug that was seen in mspsim and seemed to appear on real hardware too. 2010-04-03 16:01:00 +00:00
adamdunkels
83eaa70f03 Added pending flag 2010-04-03 13:34:20 +00:00
adamdunkels
121ca946e1 Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable. 2010-04-03 13:28:30 +00:00
joxe
6ae86d001d made number of phase neighbors configurable 2010-04-01 17:17:36 +00:00
fros4943
59357e8b75 PRINTF():ed debugging output 2010-04-01 11:08:36 +00:00
adamdunkels
cc11c9d3f2 Added missing #define 2010-04-01 10:56:00 +00:00
adamdunkels
a8d8b6d31d Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway). 2010-04-01 10:45:21 +00:00
adamdunkels
d7457bc340 Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway). 2010-04-01 10:03:19 +00:00
adamdunkels
add426de4b Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping. 2010-04-01 10:02:04 +00:00
adamdunkels
5b121b4829 Set stream bit only on non-FIN TCP segments 2010-04-01 10:01:01 +00:00
adamdunkels
b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels
c9ca5d61e2 Rewrote the pending_packet() function to check the FIFOP pin instead of the 'pending' variable - works must better on real hardware and is now supported by the latest mspsim 2010-03-31 19:08:56 +00:00
adamdunkels
4e33112d3e Guard against malformed broadcast announcements 2010-03-31 12:17:24 +00:00
adamdunkels
877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
fros4943
3bd07ea55a bugfix: refresh correct source route
+
refreshing gateway route whenever data is received via a gateway
2010-03-31 09:38:42 +00:00
adamdunkels
bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels
4d5f112960 New return value for invidating a link-layer collision 2010-03-30 23:00:22 +00:00
adamdunkels
5e7f99a2c0 Reverted the removal of the code that checked the FIFOP pin before reading a packet - checking FIFOP is the correct way to do it. Also added TXONCCA for now, including new radio.h return values to indicate a link-layer collision. 2010-03-30 23:00:05 +00:00
adamdunkels
226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels
4e3268e2e2 Added function that removes the header 2010-03-29 21:53:04 +00:00
adamdunkels
4c3b69dc07 Configuration parameter for number of MAC-layer retransmissions 2010-03-29 21:52:25 +00:00
adamdunkels
9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels
b4b7e942b6 Back off a guard time for every non-ack packet 2010-03-29 21:50:01 +00:00
oliverschmidt
315e446584 Adjusted formal parameter to single existing actual parameter. 2010-03-29 20:26:14 +00:00
fros4943
0fcbfae836 updated function: has_value argument was missing 2010-03-29 12:13:35 +00:00
fros4943
671629dea0 moved packet_sent function, it was in a HC06-specific unit 2010-03-29 11:48:09 +00:00
fros4943
b952f97799 stopping watchdog during find_file 2010-03-29 11:31:35 +00:00
joxe
bd6cd03c1d moved prefix to avoid compiler warning 2010-03-26 15:12:57 +00:00
nifi
9508d2c4d7 * Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
joxe
bec1ccc57d added support for all UDP port compressions in hc06 2010-03-26 10:28:51 +00:00
nifi
0ec8d499e4 Bug fix: only call subscriber if set 2010-03-25 19:30:44 +00:00
adamdunkels
a4f9e62295 Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API. 2010-03-25 08:51:07 +00:00
adamdunkels
2559e27414 API change to the announcement module: an annoucement can now be registered without a value. Such announcements are never transmitted to neighbors, until the announcement's value is set. 2010-03-25 08:49:56 +00:00
adamdunkels
4d68bdf74b Bugfix and addition by Dogan Yazar: psock_readbuf() shouldn't wait for a full buffer (which might never happen); a new function for sending strings that batches data and sends full buffers instead of individual strings. 2010-03-24 21:03:32 +00:00
nifi
c623616afd Neighbor state notification also when adding new neighbors 2010-03-24 16:29:45 +00:00
nifi
052c8db9f9 Added option for neighbor state changed notifications 2010-03-24 16:16:33 +00:00
joxe
4a6c6b0534 added route_rm_by_nexthop and small code cleanup 2010-03-23 14:21:04 +00:00
fros4943
4833c6555e moved inclusion of rtimer-arch.h to top of rtimer.h, to avoid circular rtimer_clock_t dependencies 2010-03-23 13:35:00 +00:00
fros4943
5eb391dbe1 allows rtimer_clock_t to be defined from contiki-conf.h 2010-03-23 13:24:38 +00:00
fros4943
95e870cc46 bugfix: structs should be declared static 2010-03-22 11:32:29 +00:00
fros4943
3394a3ef23 make sure not to add an already existing list element, as it breaks the list iteration functions 2010-03-22 11:29:58 +00:00
nvt-se
0eae63b29a Set a higher start ETX. Avoiding adding a neighbor after a failed packet transmission. 2010-03-19 16:55:29 +00:00
adamdunkels
9d06d84255 Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module 2010-03-19 13:25:15 +00:00
adamdunkels
49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels
2e8bfa5d9a Include new broadcast-announcement and renamed collect-neighbor in compilation 2010-03-19 13:21:24 +00:00
adamdunkels
f2c9b3e813 Remove old neighbor.h inclusion 2010-03-19 13:20:40 +00:00
adamdunkels
a3a8c0e179 Safety check: only try to read a packet if it was preceeded by an interrupt (which sets the pending flag) 2010-03-19 13:18:53 +00:00
adamdunkels
3a5be4a7e4 Added broadcast announcement module and collect-neighbor module 2010-03-19 13:17:55 +00:00