Commit Graph

100 Commits

Author SHA1 Message Date
George Oikonomou
9e9e6d07b0 Adjust READMEs to point explicitly to the arm-gcc version used by travis 2016-01-24 13:59:19 +00:00
Benoît Thébaudeau
ccceb63e88 cc2538: Add crypto driver and example for AES-GCM
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:54 +01:00
Benoît Thébaudeau
e77e9861fe cc2538: Add crypto driver and example for AES-CBC-MAC
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
47c24cab11 cc2538: Add crypto driver and example for AES-CTR
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
cf5e9557f8 cc2538: Add crypto driver and example for AES-CBC
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 22:01:41 +01:00
Benoît Thébaudeau
69eacbddbe cc2538: Add AES-CCM* driver
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:27 +01:00
kkrentz
24cb05059a CC2538: Add AES-128 driver 2016-01-04 00:28:27 +01:00
Benoît Thébaudeau
3dbe4c9403 cc2538: Add crypto driver and example for AES-ECB
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Antonio Lignan
37fcb927be Added PWM driver for the Zolertia Zoul module and CC2538 platforms 2015-11-25 23:56:29 +01:00
George Oikonomou
e75bdd00e7 Remove duplicate block and define the argument of -a using $(shell) 2015-11-24 13:10:10 +00:00
Jelmer Tiete
1efeda4283 Added the PORT make variable to the cc2538dk and Remote makefile. Fixed bug in these makefiles on OSX introduced in #1162 2015-11-23 11:28:34 -08:00
Benoît Thébaudeau
5d98cb71e2 cc2538: Add support for Coffee
Coffee is placed by default at the beginning of the flash memory, right
before the firmware. This avoids the memory gaps that there could be
before and after Coffee if it were placed after the firmware, because it
is unlikely that the end of the firmware is aligned with a flash page
boundary, and the CCA is not flash-page-aligned. Thanks to that, Coffee
is also always in the same flash area if its size remains unchanged,
even if the firmware changes, which makes it possible to keep the Coffee
files when reprogramming the firmware after a partial flash erase
command.

The default configuration of Coffee is set to use sensible values for a
typical usage on this SoC, i.e. for sensor data logging.

The default size of Coffee is set to 0 in order not to waste flash if
Coffee is unused.

COFFEE_CONF_CUSTOM_PORT can be defined to a header file to be used with
"#include" in order to override the default CC2538 port of Coffee. This
makes it possible to use Coffee with an external memory device rather
than with the internal flash memory, without having to alter the Contiki
files.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:22:58 +01:00
Benoît Thébaudeau
cbcf1262d6 cc2538: upload: Support .bin not starting at beginning of flash
Depending on the linker script, the generated .bin file may start beyond
the beginning of the flash memory. However, no target address was passed
to cc2538-bsl.py by the upload make target, so it used the beginning of
the flash memory in all cases.

The load address of the lowest loadable output section is now passed to
cc2538-bsl.py. The start address of the .text output section or the
address of the _text symbol could have been used too, but this would not
have been compatible with all the possible custom linker scripts.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:22:58 +01:00
Benoît Thébaudeau
790c253d6d cc2538: Define and use device features
Define the available CC2538 devices and their features, and use them to
define the linker script memory regions. The .nrdata output section is
now always defined in order to trigger an error if it is used but no
memory is available for it. The CC2538 device used by Contiki is made a
configuration option, the CC2538SF53 device being the default.

This makes more sense than defining the flash memory address and size as
configuration options like previously, all the more not all values are
possible and all the features are linked by each device.

This change also makes it possible to:
 - use the correct SRAM parameters for the CC2538NF11,
 - know at build time if the AES, SHA, ECC and RSA hardware features are
   available on the selected CC2538 device.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:33 +01:00
AntiCat
d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
Antonio Lignan
90eca482ea Remove unused RPL_CONF_MAX_DAG_ENTRIES 2015-08-29 20:22:18 +02:00
Benoît Thébaudeau
e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau
117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
George Oikonomou
b86c26fff8 Update the CC2538DK README about a Win CDC driver
* The current version of the README points to a wrong URL
  for the LUFA Virtual Serial driver.
* A driver is nowadays provided by TI with CC2538
  Foundation Firmware

Thus, this pull updates the LUFA driver URL and also provides a
link to CC2538 Foundation Firmware
2015-05-25 22:06:25 +01:00
Ulf Knoblich
a388a1bcd7 CC2538: added support for SSI1 2015-05-18 10:02:55 +02:00
Benoît Thébaudeau
e88b3908ad cc2538dk: README: Add URL of Sourcery G++ Lite 2008q3-66
Document the URL of the older Sourcery G++ Lite 2008q3-66 arm-none-eabi
toolchain mentioned by README.md so that users can easily find it if
needed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-17 01:53:09 +02:00
Benoît Thébaudeau
d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau
71f22b1775 Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou
96e1647270 Move cc2538 startup-gcc.c to the CPU dir 2015-05-13 01:31:10 +01:00
George Oikonomou
4de471478a Link and build tmp, vdd and als sensors 2015-05-12 23:42:20 +01:00
George Oikonomou
12ac8e1fb5 Initialise ADC in main, not in sensor drivers 2015-05-12 23:42:20 +01:00
George Oikonomou
3717522680 Re-work the CC2538 driver to be a driver for the Srf06 ALS only 2015-05-12 23:42:19 +01:00
George Oikonomou
598fd770b8 Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests
Test cc2538dk with the recommended toolchain
2015-05-09 22:31:18 +01:00
George Oikonomou
cd219e206c Adjust the cc2538dk readme to reflect travis test changes 2015-03-02 08:41:53 +00:00
Mikhail Gaivoronskii
3f2869824c Uncrustified platform/cc2538dk/dev/button-sensor.c 2015-02-20 21:53:33 +05:00
George Oikonomou
6bd8bb05f6 Improve wording 2015-02-16 10:17:58 +01:00
George Oikonomou
72914369e8 Re-structure CC2538 doxygen module hierarchy 2015-02-16 10:17:58 +01:00
George Oikonomou
8751e55c94 Improve wording, fix warnigs in the SSI/SPI docs 2015-02-16 10:17:58 +01:00
George Oikonomou
8fe5456588 Change default PAN ID for the CC2538DK platform to 0xABCD 2014-12-08 22:33:33 +00:00
Simon Duquennoy
c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
kkrentz
7b63217a32 ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC 2014-11-25 04:56:09 -08:00
kkrentz
2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
kkrentz
c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Camilo Rodegheri
a50e933f4b Update README.md
Adding new command for ftdi_sio which applies to Kernel>3.12 used by Ubuntu 14.04 LTS
2014-06-21 15:04:48 -03:00
George Oikonomou
ba9c2d40eb Merge pull request #682 from g-oikonomou/watchdog-cc2538
Confine CC2538 WDT on/off conf inside the driver
2014-06-03 22:05:08 +01:00
Adam Dunkels
64f65b4e45 Merge pull request #617 from nfi/extended-radio-api
Extended radio API with support for setting channel, pan id, addressing modes, etc
2014-06-03 21:32:53 +02:00
George Oikonomou
807ee624e4 Confine CC2538 WDT on/off conf inside the driver
Instead of requiring all calls to `watchdog_start` to be
wrapped inside `#if WATCHDOG_CONF_ENABLE` guards, we control
things from within the WDT driver itself.

This commit also includes some minor documentation and
indentation cleanups
2014-05-18 14:12:16 +02:00
George Oikonomou
b864ec2b71 Merge pull request #661 from hexluthor/watchdog-enable
CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer
2014-05-18 14:11:49 +02:00
George Oikonomou
eabc244bff Merge pull request #641 from hexluthor/backdoor-conf
CC2538: Add CONF parameters to select boot loader backdoor pin and logic level
2014-05-18 13:29:02 +02:00
Ian Martin
2abaeaa8cc CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters. 2014-05-02 11:35:58 -04:00
Ian Martin
7081440eff CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer. 2014-05-02 10:28:30 -04:00
George Oikonomou
08c884afa0 Improve the CC2538 extended RF API implementation
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
2014-04-23 12:20:16 +01:00
Ian Martin
ee05810904 Changes suggested by @bthebaudeau. 2014-04-18 10:29:47 -04:00