Commit Graph

2356 Commits

Author SHA1 Message Date
Oliver Schmidt
a824722862 Merge remote-tracking branch 'upstream/master' 2015-04-26 14:35:40 +02:00
Oliver Schmidt
da536cb07c Removed superfluous AppleCommander parameters. 2015-02-21 17:16:08 +01:00
Andreas Löscher
a4206273a5 Fixed HC analyser for SAC and DAC fields 2015-02-16 13:58:36 +01:00
Jelmer Tiete
44d1a376ec Updated cc2538-bsl submodule to version 1.1 (d6711e2). Most important changes include support for Python3, fixed a bug that would make synch fail on first try, added support for DTR and RTS pins driving Bootloader_enable and Reset pins, versioning system, setting of secondary IEEE address, general clean-up. 2015-02-12 20:13:40 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
kkrentz
fb00a217f5 packetbuf: Use packetbuf_holds_broadcast() all-over 2014-11-13 09:58:08 -08:00
Moritz 'Morty' Strübe
1692169138 Output sha1sums of files used for simulation on fail
This helps reproducing results from the CI
2014-11-13 09:10:53 +01:00
Fredrik Österlind
16141845cf Merge pull request #850 from TheGeorge/master
Pull request for issue #840
2014-11-10 15:36:57 +01:00
Andreas Löscher
6d61893e09 Fixed a bug with the ScriptRunner plugin
The ScriptRunner plugin started the simulation in GUI and NOGUI mode.
Now the simulation is only started in nogui mode
2014-11-07 13:53:16 +01:00
Andreas Löscher
f68bc3a40b fixed a bug in executeJAR 2014-11-07 12:09:14 +01:00
Andreas Löscher
0e729592f3 Added the control plugin behaviour to executeJAR 2014-11-07 11:45:38 +01:00
Enrico Joerns
f49e1b8f5f Button: Allow to press and release button by mouse and key
In the previous implementation a click event was triggered when the
button was pressed.
This implementation allows to set and release buttons independently both
by mouse clicking and by key typing.
2014-11-07 01:38:54 +01:00
Andreas Löscher
4dcc3ba7fa Better error message when aborting simulation 2014-11-06 17:23:01 +01:00
Andreas Löscher
6cbe94b7e9 New PluginType SIM_CONTROL_PLUGIN for sim control
SIM_CONTROL_PLGUIN are handled like SIM_PLUGIN, with one exception.
If the simulation is started with -nogui=<simfile> than it is checked
if a controlling plugin is loaded. If not, the simulation terminates
with an error message.
2014-11-06 17:16:24 +01:00
Enrico Joerns
bc6b7535d0 Buttons: use non-deprecated MSPSim button api 2014-11-04 01:48:12 +01:00
Enrico Joerns
b5d119babd Buttons: Some minor cleanups
Removed imports not required anymore and made some class members final
2014-11-04 01:48:12 +01:00
Enrico Joerns
b28c593776 Buttons: Added missing @Override annotations 2014-11-04 01:48:12 +01:00
Enrico Joerns
0a63922fa2 Buttons: Move implementation of button routines to Button class
The implementation of clickButton(), pressButton(), and releaseButton()
can be shared accross the several node-dependent implementations as
they use the node-dependent doPressButton() doReleaseButton() routines.
2014-11-04 01:48:12 +01:00
Enrico Joerns
be88a4fc52 Button: Add doPressButton() and doReleaseButton() to Button class
As every Button has a node-specific implementation part, this should be
the minimal interface to the backend node emulator for pressing and
releasing a button.
2014-11-04 01:48:11 +01:00
Enrico Joerns
378ca2629d Button: None of the buttons will saves its state
Saving a buttons state in simulation file is not required as its state
is much too volatile.
2014-11-04 01:48:11 +01:00
Enrico Joerns
82d30ef2e3 SkyButton: Reduce dependency on SkyMote
Placed call to setButton() in implementation-specific functions
doPressButton() and doReleaseButton() as in ContikiButton.
2014-11-04 01:48:11 +01:00
Enrico Joerns
d99708ba08 Button: Move common interface visualization to Button class
The implementation of a simple JPanel with a JButton was only code
duplication accross the several button implementations.
2014-11-04 01:48:11 +01:00
Enrico Joerns
9d27b181c1 [cooja/mspsim] Msp802154Radio: Fix maximum power indicator
Previously getOutputPowerIndicatorMax() returned the fixed value 31.
This is valid for e.g. the mspsim CC2420 radio implementation but not for the CC2520 implementation where the maximum returned value is 9.

Thus to fix transmission range issues (for example for Wismote node) the maxium value provided by the radio implementaiton must be used.
2014-10-05 00:38:49 +02:00
Fredrik Österlind
718e488b78 Merge pull request #795 from ejoerns/pull-req/cooja-println-cleanup
[Cooja] Println cleanup
2014-10-02 09:25:36 +02:00
Enrico Joerns
903d0333d3 [cooja] Removed some further printlns 2014-10-02 02:11:41 +02:00
Enrico Joerns
f02266d67c [cooja] dialogs/MessageListe: User Logger instead of println 2014-10-02 02:05:39 +02:00
Enrico Joerns
927d9a3153 [cooja] dialogs/MessageList: Added @Override annotations 2014-10-02 02:05:14 +02:00
Enrico Joerns
40f54a8e26 [cooja] Radio802154: Removed obsolete comments including println hints 2014-10-02 01:53:26 +02:00
Enrico Joerns
c7abba860f [cooja] Radio802154: Added @Override annotations
Also removed some unused imports
2014-10-02 01:40:07 +02:00
Enrico Joerns
c5e034fa1a [cooja] IEEE802154Analyzer: Use logger
Replaced println and printStackTrace by logger
2014-10-02 01:37:24 +02:00
Enrico Joerns
373b00fc47 [cooja] PcapExporter: Use logger
Removed unnused imports, replaced println and printStackTrace by logger
2014-10-02 01:25:49 +02:00
Enrico Joerns
95b54f415e [cooja] MemoryLayout: Remove annoying println 2014-10-02 01:14:07 +02:00
Fredrik Österlind
8df1c98a85 Merge pull request #781 from ejoerns/pull-req/cooja-serialsocket
[Cooja] Configurable serial socket plugin
2014-09-24 12:49:15 +02:00
Enrico Joerns
55979636d7 [cooja] plugins/VariableWatcher: Added minimal quick help 2014-08-31 01:52:17 +02:00
Enrico Joerns
42ad188b69 [cooja] plugins/VariableWatcher: Also disble addr and size input fields when monitoring 2014-08-31 01:52:17 +02:00
Enrico Joerns
33b211c0b3 [cooja] plugins/VariableViewer: Fix decoding in stringToValue() 2014-08-31 01:52:17 +02:00
Enrico Joerns
171863a8c5 [cooja] plugins/VariableWatcher: Fixes for value layout
- Fixed layout axis form x to page to show multi-line value fields.
- More flexible width calculation for value fields
2014-08-31 01:52:16 +02:00
Enrico Joerns
57719de18d [cooja] plugins/VariableWatcher: Catch exceptions, show error dialog for invalid addresses
And some gui option handling fixes
2014-08-31 01:52:16 +02:00
Enrico Joerns
f70e1ef99f [cooja] plugins/VariableWatcher: Allow to access memory by address/size
By selecting the checbox next to the address field, VariableWatcher
switches from variable mode to address mode.
Now any address and size might be entered to show data from memory.

Additionally for variables where now size information is available the
interface allows the user to select one.
2014-08-31 01:52:16 +02:00
Enrico Joerns
9d8516e9ef [cooja] plugins/VariableWatcher: Replaced obsolete Vector by ArrayList 2014-08-31 01:52:16 +02:00
Enrico Joerns
490bc6c5cb [cooja] plugins/VariableWatcher: fixed handling of unknown variable sizes 2014-08-31 01:52:16 +02:00
Enrico Joerns
7ac14fae60 [cooja] plugins/VariableWatcher: Added Tooltip that shows address, added address variable type, fixed columns width layout 2014-08-31 01:52:16 +02:00
Enrico Joerns
d1e0311184 [cooja] plugins/VariableWatcher: Added swingx library to provide autocomplete support for variable names combobox in plugins/VariableWatcher 2014-08-31 01:52:16 +02:00
Enrico Joerns
72dcd323a3 [cooja] plugins/VariableWatcher: Added 'line break' for byte text fields
Adds new line each 8 text fields
2014-08-31 01:52:16 +02:00
Enrico Joerns
a638bd5b01 [cooja] plugins/VariableWatcher: Added address and and size labels
to display information about currently selected variable
2014-08-31 01:52:15 +02:00
Enrico Joerns
c0f727e3c0 [cooja] plugins/VariableWatcher: implemented monitoring, writing; fixed various issues 2014-08-31 01:52:15 +02:00
Enrico Joerns
e77c01d586 [cooja] plugins/VariableWatcher: Fixed xml config save/load 2014-08-31 01:52:15 +02:00
Enrico Joerns
16d94780e9 [cooja] plugins/VariableWatcher: Remove charValuePane and reimplement read functionality and more 2014-08-31 01:52:15 +02:00
Enrico Joerns
cdc9b9a9d2 [cooja] plugins/VariableWatcher: Replace varName KeyListener by DocumentListener as only content changes change validation state of varName
Modify foreground color of varName instead of background color because some LookAndFeels do not support colored backgrounds.
2014-08-31 01:52:15 +02:00