Commit Graph

925 Commits

Author SHA1 Message Date
adamdunkels
ad35c54473 Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value 2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb Turned the DRAW_TREE debug flag off by default 2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53 Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets. 2010-10-04 20:27:50 +00:00
adamdunkels
212e73faa6 Removed old netsim code. Added a function for obtaining the packet attributes of a queuebuf packet. 2010-10-04 20:26:01 +00:00
joxe
4f3fc1c404 fixed xmac to use new channel check define name 2010-10-03 22:46:53 +00:00
adamdunkels
ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels
ae88ed04f1 Moved the definition of the channel check rate used by the radio duty
cycling layer. This definition was previously held in net/mac/mac.h,
with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used
by the radio duty cycling layer, it makes more sense to change its
name to reflect this. Also, the configuration option should be tied to
the netstack configuration instead.

So the new configuration option is called
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 20:37:32 +00:00
adamdunkels
40583fe112 Removed the polite announcement code, since it was not used, and enabled the broadcast announcement code by default. Increased the default intervals for broadcast announcements. 2010-10-03 20:10:22 +00:00
adamdunkels
605392522f Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them. 2010-10-03 20:08:44 +00:00
adamdunkels
d0579c8a81 Cleaned up the collect neighbor management code 2010-10-03 20:07:10 +00:00
adamdunkels
b23a364397 rtmetric values should always be computed as 16-bit values 2010-10-03 20:06:25 +00:00
adamdunkels
32ba90ea4c Bugfix: make sure that neighbor exists before attempting to update tx
count.
2010-09-28 06:53:02 +00:00
joxe
77c5187a2e fixed bug where context is null but still referenced 2010-09-23 19:57:50 +00:00
joxe
494d2a3073 only compare with global addresses when selecting source for a specific destination 2010-09-23 18:17:27 +00:00
adamdunkels
eed22a6f3c A number of changes to the collect code:
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
2010-09-22 22:08:08 +00:00
adamdunkels
2cae71e89b Added a function for obtaining the link estimate and rtmetric for a neighbor 2010-09-22 22:04:55 +00:00
adamdunkels
46b2451969 Made the initial link estimate explicit 2010-09-22 22:03:21 +00:00
joxe
1dc5366b15 fixed buggy comment 2010-09-21 13:15:25 +00:00
joxe
f1d19a5f9a no callback to rpl if rpl is not used 2010-09-21 13:13:09 +00:00
joxe
63ab1ffce0 clear default route when neighbour is removed 2010-09-20 15:30:12 +00:00
nvt-se
58db04ee64 Set a high penalty for packet losses. 2010-09-15 15:59:52 +00:00
nvt-se
098f4001e0 Use fixed point arithmetic in the calculations of the ETX EWMA 2010-09-15 15:10:25 +00:00
nvt-se
adf6961a85 Various bug fixes and adjustments for rpl-11 2010-09-15 13:22:22 +00:00
adamdunkels
18e31f33b9 Minor tweaks. Removed debug output from CVS. 2010-09-14 06:48:36 +00:00
adamdunkels
eb58968459 Added a timer to each phase structure that keeps track of for how long
a particular receiver has not ACKed packets. After some time
(currently 16 seconds), the sender will begin sending full strobe
periods again.
2010-09-13 13:39:05 +00:00
adamdunkels
591766e663 Significant improvements to the Collect protocol:
* Loop detection and untangling. Now uses in-band loop detection that
  works.

* Link quality estimation. Now starts with a conservative /
  pessimistic estimate for new links.

* Retransmissions. MAC layer and network layer retransmissions are now
  decoupled.

* Loss handling. Deals better with losses now.

* Concurrent applications. Each connection now maintains its own
  neighbor table with separated cost to sink estimates for each
  connection.
2010-09-13 13:28:14 +00:00
adamdunkels
4e0744954a Rewrite of important parts of the Collect logic: link estimation
calculation and parent selection.  This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
2010-09-08 19:21:45 +00:00
nifi
f05952c926 Changed packet id to use 8 bit instead of 4 bit 2010-08-31 13:14:49 +00:00
dak664
12479c32bc Fix compiler warnings 2010-08-01 21:18:07 +00:00
nvt-se
11760059d3 The second predicate is not needed. 2010-07-03 23:52:02 +00:00
nvt-se
007d4a4001 Improved logic for processing DIOs 2010-06-28 14:51:23 +00:00
nifi
30db4eff52 Made QUEUEBUF_STATS configurable 2010-06-24 09:48:21 +00:00
nifi
e965b74cf5 added missing include 2010-06-18 08:28:56 +00:00
nifi
4741b95858 added missing include 2010-06-16 10:10:10 +00:00
nifi
21828ad782 Changed the retransmission time to be based on the configured MAC channel check rate when the RDC has no channel check interval. 2010-06-16 10:08:30 +00:00
adamdunkels
7647cbd8aa Use the list_item_next() API 2010-06-15 19:22:25 +00:00
adamdunkels
560c84a2fe Added a function for getting the first global IPv6 address 2010-06-15 19:16:22 +00:00
nifi
01b1359b1f removed unused (and slightly problematic) code 2010-06-15 14:19:22 +00:00
adamdunkels
3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
adamdunkels
951fd78f6c ctimer moved from net/rime to sys/ 2010-06-14 18:58:45 +00:00
nvt-se
fad2b1def9 Clarified the function naming for neighbor information callbacks - names now indicate where the information is from. 2010-06-14 18:35:04 +00:00
nifi
adc38568ad Minor optimization: replaced init loops with memset to reduce code size 2010-06-14 13:51:13 +00:00
nifi
7499939c94 removed debug output 2010-06-14 13:07:09 +00:00
nvt-se
e000b1abf3 A major update to ContikiRPL resulting in a reduced code footprint by
300 bytes, as well as cleaner protocol logic.

* Made parent management uniform.

* Simplified the DIO processing.

* Improved the Objective Function API and its documentation.

* Removed redundant code at various places.

* Improved identifier naming.

* Switched visualization from candidate parents to preferred parents only.

* Made DAO ACK transmissions configurable.

* Improved initial ETX guess by using a cached local confidence value.

* Added a periodical rank recalculation function to reduce
  the maximum stack depth.

* Increased the Trickle redundancy constant to ensure faster
  topological updates.
2010-06-14 12:44:37 +00:00
adamdunkels
a890cd3d49 Moved ctimer.[ch] from their old and illogical location in core/net/rime to a more appropriate place in core/sys 2010-06-14 11:33:58 +00:00
adamdunkels
8f8393aadc Moved ctimer.[ch] from their old and illogical location in core/net/rime to a more appropriate place in core/sys 2010-06-14 07:34:36 +00:00
adamdunkels
baa62e9314 Addresses are not const 2010-06-14 06:55:26 +00:00
adamdunkels
2647f879c2 Bugfix: select the best parent if current parent is NULL 2010-06-14 06:54:47 +00:00
adamdunkels
8d1680fed5 Filter duplicate packets 2010-06-14 06:52:41 +00:00
adamdunkels
a6bd51f361 If a packet is lost due to NOACK or TXERR, we count the number of transmissions and we add an additional loss penalty (currently one) 2010-06-14 06:51:58 +00:00