Arngrimur Bjarnason
b533a683c3
Changed makefile. Removed extra slash
2012-12-10 20:41:43 +01:00
Mariano Alvira
f60a00b93e
the contiki-maca process should wait for a poll event
2012-12-02 14:26:51 -05:00
Mariano Alvira
b3bb3ff53d
fix very incorrect insert_at_rx_head; the bugged version would make
...
the rest of the rx list dangling.
this is used to insert the ack packet needed by the upper layers in
the netstack.
2012-12-02 14:25:39 -05:00
Mariano Alvira
f7d1d78ac9
disable pad keeper when using ADC pin; otherwise you'll see a 20k input
...
impedance.
2012-11-30 10:44:26 -05:00
Adam Dunkels
db41a51ae6
Make gcc default LD, and allow override with LD_OVERRIDE
2012-11-21 19:46:31 +01:00
Ilya Dmitrichenko
d0f18e5d04
Fixed LDFLAGS for cross-compiling of "native"
2012-11-21 18:09:29 +00:00
Ilya Dmitrichenko
092c69639c
Enable native
target for cross-compiling -
...
by now it would have worked if you set CC via
command line (e.g. `make CC=clang`, though it
wouldn't work when CC is set in the platform
makefile which includes `Makefile.native`.
2012-11-21 18:09:10 +00:00
Mariano Alvira
03ab3fe317
Newer and cleaner TARGET=econotag as well as robust mc13224v
...
configuration system.
(also deprecate TARGET=redbee-econotag)
- mc13224v now automatically probes hardware config for buck converter
and 32kHz crystal as well as automatically monitors battery voltage
and manages the buck accordingly.
- new flashed based config system for mc13224v parameters such has
radio modes (demod, autoack), nvmtype, mac address, channel and
power.
- considerably cleaned up econotag platform code (suffered from severe
case of bit-rot)
2012-11-19 19:16:29 -05:00
Mariano Alvira
2c9a538582
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x
...
bump libmc1322x to 7bee48243c
Conflicts:
cpu/mc1322x/board/Makefile.board
cpu/mc1322x/lib/include/uart.h
cpu/mc1322x/lib/uart1.c
cpu/mc1322x/lib/uart2.c
cpu/mc1322x/src/default_lowlevel.c
2012-11-18 18:27:39 -05:00
Etienne Duble
7905316c54
Fix: stm32w flasher for Ubuntu 12.04 and later
2012-11-09 14:14:57 +01:00
Etienne Duble
ecdbbaec9a
Fix: handle stm32f-based serial interfaces (/dev/ttyACMx)
2012-11-09 14:00:16 +01:00
George Oikonomou
79cffa030f
cc2531: USB CDC-ACM code style fixes
...
Closes #18
2012-11-01 17:42:04 +00:00
George Oikonomou
1a0f01ccc4
cc253x: Config to swap between UART and USB I/O
...
See Pull Request #18
2012-11-01 17:41:57 +00:00
Philippe Rétornaz
eabaa0c8e4
cc253x: DMA Changes
...
- Fixed DMA irq flag clearing
- Added a dma_reset helper
See Pull Request #18
2012-11-01 17:41:49 +00:00
Philippe Rétornaz
898bd07810
cc253x: optionally push bits in p2 interrupt
...
See Pull Request #18
2012-11-01 17:41:46 +00:00
Philippe Rétornaz
0a6e65acdf
cc2531: USB changes:
...
- usb cdc-acm:
* implement get line coding
* use printf only when debugging
* Add events
- usb-core: do not force debugging
See Pull Request #18
2012-11-01 17:41:41 +00:00
George Oikonomou
c1d72475d7
cc253x: Renamed P2 interrupt-related files for better consistency
...
See Pull Request #18
2012-11-01 17:41:38 +00:00
George Oikonomou
c60f0b4349
cc253x: P2-related routines are now bankable
...
We keep the ISR in its own file and move everything else
to a different one, so that we only have to keep the ISR
in HOME
See Pull Request #18
2012-11-01 17:41:32 +00:00
George Oikonomou
d9d4fa168d
cc253x: Renamed the P2 ISR
...
This is mainly a naming convention thing, we want to have 'isr'
as part of the name, instead of 'int'. We also want port_2 instead
of p2 because we already had port_1
See Pull Request #18
2012-11-01 17:41:28 +00:00
George Oikonomou
fea4970142
cc253x: Configurable linkage for the P2 ISR
...
See Pull Request #18
2012-11-01 17:41:24 +00:00
Philippe Rétornaz
ba96408f37
cc253x: Add USB support to the compilation scripts
...
See Pull Request #18
2012-11-01 17:41:21 +00:00
Philippe Rétornaz
d93fee612d
cc2531: Add USB driver
...
See Pull Request #18
2012-11-01 17:41:17 +00:00
Philippe Rétornaz
ddc8120d7c
cc253x: Add p2 interrupt handler
...
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.
See Pull Request #18
2012-11-01 17:41:11 +00:00
Philippe Rétornaz
dec34c21ef
cc2531: change cdc-acm descriptor
...
Change to have a real usb VID/PID and better fit the capabilities
of the CC2531 hardware (enpoint size, location).
Compile only if the cdc-acm class is requested.
See Pull Request #18
2012-11-01 17:41:07 +00:00
Philippe Rétornaz
0e55eb0947
cc2531: Copy arm usb framework
...
See Pull Request #18
2012-11-01 17:40:35 +00:00
George Oikonomou
713c2e5974
DOS EOL and indentation fixes (core/ apps/ cpu/)
...
- Removed some DOS EOLs
- Changed some tabs to spaces
- Removed some trailing whitespaces
Part of Pull Request #6
2012-10-30 13:43:51 +00:00
Adam Dunkels
6c8fbd2dff
Merge pull request #11 from adamdunkels/remove-rtl8019
...
Removed old unused RTL8019 code that had license issues
2012-10-29 08:43:59 -07:00
Adam Dunkels
1af22fa4fe
Removed old unused RTL8019 code that had license issues
2012-10-29 16:08:09 +01:00
Mariano Alvira
4087c0785f
remove -g
...
see http://comments.gmane.org/gmane.os.contiki.devel/13869
2012-10-29 10:34:28 -04:00
Adam Dunkels
944537fccf
Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree
2012-10-26 15:54:49 +02:00
Niclas Finne
f5c8cff5b2
Made MT stack size configurable
2012-10-23 00:52:52 +02:00
George Oikonomou
d84a97103f
cc2x3x stack debugging macro fix
2012-09-20 15:12:02 +01:00
George Oikonomou
fde1510653
Added definitions for cc2530 DMA-related SFR bits
2012-09-20 15:09:15 +01:00
George Oikonomou
3b0e92168b
Copied cc2530 stack functions to the cc2430 port
2012-09-20 15:09:15 +01:00
George Oikonomou
95b9d4ee29
Sensinode/cc2430 stack depth optimisation
...
This replicates the method used by the cc2530 port
2012-09-20 15:09:15 +01:00
George Oikonomou
cb168da729
Changed the cc2430 sleep_flag to uint8_t
2012-09-20 15:09:15 +01:00
George Oikonomou
fa5a38666b
Removed redundant #else blocks
2012-09-20 15:09:15 +01:00
George Oikonomou
88c6689e38
cc2430: Build with --fomit-frame-pointer
2012-09-20 15:09:15 +01:00
Niclas Finne
767e8bb551
Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms
2012-09-20 14:01:56 +02:00
Niclas Finne
4630945475
Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms
2012-09-19 22:49:19 +02:00
George Oikonomou
ee7af77ca9
Reworked the cc2530 stack debugging facilities:
...
- Moved to their own file
(so we can later copy the entire thing over to cc2430)
- Renamed the functions
(for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
2012-09-07 17:40:17 +01:00
Philippe Rétornaz
9a63e8c027
cc253x: Add stack monitoring helpers
2012-09-07 17:32:54 +01:00
Philippe Rétornaz
48d99f15c8
cc253x: fix dma interrupt enable flag
2012-09-07 17:32:54 +01:00
George Oikonomou
c6ec22c4c8
cc2530: Added a method to maximise stack depth
...
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz
666ff6ca55
cc253x: use a uint8_t for sleep_flag
...
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
Philippe Rétornaz
44bcabe89c
cc253x: Change CFLAGS
...
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
2012-09-07 17:32:10 +01:00
George Oikonomou
8699f7741d
Fixed typos and a stray printf. Adjusted comments
2012-09-07 17:31:25 +01:00
Ivan Delamer
b43dad00b0
Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES
...
#defines.
2012-09-04 11:12:18 -06:00
Ivan Delamer
2e72ec3594
Place ATmega1281 define in correct section (it does have compare C
...
unit, avoid duplicate define and compiler warning).
2012-09-01 15:22:13 -06:00
Ivan Delamer
5636357243
Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON,
...
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
2012-09-01 15:20:00 -06:00
George Oikonomou
26a87ee9cb
Improved handling of cc2x3x rf_flags
2012-07-11 10:53:14 +01:00
George Oikonomou
43f2790357
Added channel_get() to the cc2x3x RF drivers
2012-07-11 10:53:14 +01:00
George Oikonomou
d66241fd97
Bugfixed the cc2530 LOW_POWER_RX configuration
...
Report and fix by Tom Xiao
2012-07-11 10:53:14 +01:00
George Oikonomou
62fbd389d8
Renamed a cc253x SFRX to stop namespace conflicts
...
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.
See SDCC bug 3513300
2012-07-11 10:53:14 +01:00
George Oikonomou
4b73b48f60
Fixed the cc2530 RSSI adjustment
2012-07-11 10:53:14 +01:00
Ivan Delamer
17a62a649c
ATmega128RFA1 bug fix: no interrupt pin used (embedded radio).
...
Enabling interrupt caused MCU reset if using pin as GPIO.
2012-07-10 14:36:47 -06:00
Niclas Finne
418a5772e6
Removed leds debug output
2012-06-07 10:35:22 +02:00
George Oikonomou
47db065034
Bugfixed the cc253x UART0 init (Thanks, Deng Jian)
...
The flush instruction was resetting the stop bit level to 'low'
2012-06-06 15:25:57 +01:00
David Kopf
e9a55cc222
Enable check on received length to prevent buffer overflow. Thank you Cooja!
2012-05-28 13:02:23 -04:00
George Oikonomou
259b497122
Minor Sensinode build cleanup
2012-05-16 15:22:31 +01:00
George Oikonomou
1f7171f943
Adjust cc2x3x ports to the new clock API
2012-05-16 15:22:31 +01:00
George Oikonomou
0d4b90c42b
cc2530 watchdog improvements and cleanup
2012-05-16 15:22:31 +01:00
George Oikonomou
274a5ebb9c
Fixed a typo which was preventing the cc253x watchdog from starting
2012-05-16 15:22:30 +01:00
Laurent Deru
56914963ef
Reactivate flash protection after maca init
2012-05-09 10:24:38 -04:00
Mariano Alvira
a4813d815f
use --gc-sections instead of -gc-sections
2012-05-06 12:19:20 -04:00
Mariano Alvira
4acad929f0
add gc-sections, roughly 4kB savings.
2012-05-06 09:24:06 -04:00
David Kopf
d6dc216e02
Reorder includes to prefer platform routines. Remove redundant RPL define.
2012-04-27 16:54:09 -04:00
George Oikonomou
dd26accc07
We can now use SDCC's __nonbanked feature
...
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!
* Added a facility which allows us to enable/disable the
feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
(expands to __nonbanked)
* Started using this for some examples
2012-04-26 15:28:43 +01:00
Adam Dunkels
b85bc3379c
Bugfix in clock_wait() declaration. Various style fixes.
2012-04-22 20:54:29 +02:00
George Oikonomou
e95f94a9a8
Added support for reading MAC from the cc253x flash
...
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
George Oikonomou
29090a3dda
The cc253x Makefile specifies SoC flavor
...
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256
- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
2012-04-20 16:03:38 +01:00
George Oikonomou
6fb48174ba
Fixed a documentation typo
2012-04-20 16:03:37 +01:00
Niclas Finne
1b13b69814
Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611
2012-04-10 16:05:10 +02:00
Niclas Finne
57a166c3db
Corrected compiler flags for the IAR compiler
2012-04-10 15:27:44 +02:00
David Kopf
cac4e9a222
Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
...
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
David Kopf
40bd020394
Fix wrong register addresses.
2012-04-09 09:58:12 -04:00
George Oikonomou
57969259ce
cc2x3x clock_delay(len) now delays for approx. len usecs
2012-04-03 16:26:11 +01:00
George Oikonomou
3cb26adeda
Added an ASM(foo) macro for cc243x
2012-04-03 16:26:11 +01:00
George Oikonomou
242e02658f
The cc2530 UART driver was sending a 0 down the line on init
2012-04-03 16:26:10 +01:00
George Oikonomou
b3de052e01
Ported the stack-friendly clock ISR code over from cc243x to cc253x
2012-04-03 16:26:10 +01:00
George Oikonomou
11a7f644ac
Comment rewording and formatting
2012-04-03 16:26:10 +01:00
George Oikonomou
ce17fa131c
Stack-friendly cc243x clock ISR enabled by default
...
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.
* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
2012-04-03 16:26:10 +01:00
George Oikonomou
924fe934c1
Deleted obsolete macros. Minor formatting
2012-04-03 16:26:10 +01:00
George Oikonomou
ffa3a1c4c3
cc2x3x clock driver cleanup
...
* Bit-Addressable SFRs are now accessed as such,
instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
2012-04-03 16:26:10 +01:00
simonduq
930c7c25bc
fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file,
...
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
2012-04-03 11:47:30 +02:00
George Oikonomou
5240519dd9
Renamed a config define to better match contiki's naming philosophy
2012-04-02 11:38:54 +01:00
George Oikonomou
bce34e4b9a
For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir.
...
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
2012-04-02 11:22:19 +01:00
George Oikonomou
d958ee3125
Deleted the old Sensinode 'read mac from flash' routine.
...
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
2012-04-02 11:21:32 +01:00
George Oikonomou
5d8f63a61b
We've not been using the cc2430 converter for a while now
2012-04-02 11:03:49 +01:00
George Oikonomou
7854ee499a
Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0)
2012-03-29 13:11:04 +01:00
George Oikonomou
5afdd19403
Adjusted check to determine if we are being built with SDCC
...
Since rev #7342 , SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
2012-03-29 13:10:25 +01:00
George Oikonomou
4f1e251603
Some uN_t had crept back in cc2530dk and sensinode.
...
Changed to uintN_t plus a bit of code formatting
2012-03-29 13:10:10 +01:00
simonduq
946f00bf7b
stm32w: added ability to upload and reset all connected boards, and login using MOTE=x
2012-03-26 23:00:44 +02:00
simonduq
95ae5c5d51
avoid unnecessary symbols.c/h copying
2012-03-26 23:00:43 +02:00
George Oikonomou
ad256e5014
New platform: TI cc2530 Development Kit
...
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
George Oikonomou
b7674c3636
Reincarnate the sensinode/cc2430 port
2012-03-23 14:41:07 +00:00
simonduq
e4fb360262
stm32w platforms: contikimac support in the Rime case, with EUI-64
2012-03-20 17:30:59 +01:00
simonduq
5da4463236
adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La)
2012-03-20 17:29:58 +01:00
Niclas Finne
ff7a977dc7
Improved support for the IAR compiler for the MSP430 platforms
2012-03-07 23:09:05 +01:00
Niclas Finne
684c3edfa6
Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.
2012-03-07 23:04:52 +01:00