Commit Graph

2693 Commits

Author SHA1 Message Date
Antonio Lignan
bc2ff5b352 Merge pull request #1838 from alignan/pull/fix-tmp102-calc
Zoul: fix TMP102 value conversion
2016-08-26 00:00:59 +02:00
Antonio Lignan
61e8a174db Merge pull request #1828 from alignan/pull/z1-libraries-cleanup
Z1: cleaned up non-required libraries from builds and moved SENSORS d…
2016-08-25 10:54:17 +02:00
Antonio Lignan
32385b2910 Zoul: fix TMP102 value conversion 2016-08-24 16:34:02 +02:00
Antonio Lignan
26c4a81331 Z1: cleaned up non-required libraries from builds and moved SENSORS declaration to its own file 2016-08-24 16:05:38 +02:00
Antonio Lignan
6947fc7381 Merge pull request #1826 from alignan/pull/crossval-fix
Zoul: fixed voltage divider relationship
2016-08-17 17:33:07 +02:00
George Oikonomou
6f44fb8c44 Merge pull request #1783 from g-oikonomou/bugfix/cc13xx/contikimac-timings
Adjust ContikiMAC timings for CC13xx PROP mode
2016-08-17 14:06:07 +01:00
Antonio Lignan
cb42bafbfb Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
Antonio Lignan
0a02f0ac7c Zoul: fixed voltage divider relationship 2016-08-16 14:24:13 +02:00
George Oikonomou
39e8435141 Add 460800 baud rate support to Z1 2016-08-12 01:23:50 +01:00
George Oikonomou
d7028652fe Remove legacy sniffer configuration: zoul 2016-08-12 01:23:50 +01:00
George Oikonomou
35c37f356c Remove legacy sniffer configuration: openmote-cc2538 2016-08-12 01:23:50 +01:00
George Oikonomou
4a4b3a344d Remove legacy sniffer configuration: cc2538dk 2016-08-12 01:23:50 +01:00
George Oikonomou
07f984eec2 Remove legacy sniffer references: Docs 2016-08-12 01:23:50 +01:00
George Oikonomou
dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou
0de1dc1025 Remove built-in sniffer support: CC2530 2016-08-12 01:23:49 +01:00
George Oikonomou
1a4947499c Merge pull request #1819 from bthebaudeau/cc2538-en-32k-xtal
CC2538: Use the 32.768-kHz crystal if present
2016-08-11 23:48:04 +01:00
George Oikonomou
47265c9305 Merge pull request #1813 from arurke/cc26xx_cc13xx_i2c_fixes
CC26xx/CC13xx fix for burst TX followed by burst RX
2016-08-11 23:47:42 +01:00
Benoît Thébaudeau
9e03df6cb7 CC2538: Use the 32.768-kHz crystal if present
Enable the 32.768-kHz crystal on all the CC2538 platforms where it is
present in order to get a better time accuracy.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-11 23:49:03 +02:00
Benoît Thébaudeau
ae5205f9e2 doxygen: Fix orphan modules
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Andreas Urke
8128986ccd Remove unecessary bool 2016-08-09 22:56:53 +02:00
Andreas Urke
e1359519ab Fix i2c multiple write bug, as reported by Ron Segal: https://sourceforge.net/p/contiki/mailman/message/34633862/ 2016-08-09 22:56:28 +02:00
Nicolas Tsiftes
2e4c6eef54 Merge pull request #1804 from mdlemay/docker
galileo: Add support for containerized build environment
2016-08-09 15:19:28 +02:00
Nicolas Tsiftes
956497a672 Merge pull request #1805 from mdlemay/ipv6-link-stats
galileo: Build link-stats.c when IPv6 is enabled
2016-08-08 11:39:42 +02:00
Michael LeMay
bde8eb35ae x86, galileo: Fix UART system call authorization initialization
This patch fixes UART system call authorization initialization (when
protection domain support is enabled) to only initialize the system call
entrypoint and authorization data structures once, prior to per-port
setup. Previously, if two UARTs were configured, the setup procedure for
the second UART would erase the system call authorization for the
first (console) UART, resulting in a crash upon the next attempt to
perform console output.
2016-08-04 16:09:44 -07:00
Michael LeMay
31ad67abd7 x86: Support configurable UART baud rate
This patch extends the Intel Quark X1000 SoC UART initialization API to
accept a numeric baud rate specification.
2016-08-03 07:58:51 -07:00
Michael LeMay
e50b73c9b1 galileo: Add support for containerized build environment
This patch adds a Dockerfile for building a container configured as a
build environment for Intel Galileo boards.  This patch also provides
documentation for using the containerized build environment.  Finally, it
streamlines the instructions for booting Contiki on Galileo and includes
other documentation refinements.
2016-08-02 20:54:41 -07:00
Michael LeMay
836fa4d6fa galileo: Build link-stats.c when IPv6 is enabled
This is required by the IPv6 implementation in Contiki OS.
2016-07-31 17:03:42 -07:00
Sumankumar Panchal
6dfd358821 TSCH port for CC2538 based platforms. 2016-07-22 09:38:25 +05:30
George Oikonomou
4495d14702 Make ROM bootloader configurable through contiki- or project-conf.h 2016-07-17 00:26:52 +01:00
George Oikonomou
01590088d3 Update to latest CCxxwares: Srf06+EM drivers 2016-07-17 00:26:52 +01:00
George Oikonomou
f6437b6086 Update to latest CCxxwares: Sensortag drivers 2016-07-17 00:26:52 +01:00
George Oikonomou
5de7b1bbac Update to latest CCxxwares: Launchpad drivers 2016-07-17 00:26:51 +01:00
George Oikonomou
c42cb2b0cb Update to latest CCxxwares: common drivers 2016-07-17 00:26:51 +01:00
George Oikonomou
c87e579b06 Adjust ContikiMAC timings for CC13xx PROP mode
#1684 slightly varied RF startup time and, as a result, threw ContikiMAC timing configuration off. This manifests itself with very poor CC13xx PROP mode radio performance, as documented in #1747.

This pull fixes this bug by slightly increasing ContikiMAC's inter-packet interval. This gives the receiver a little more time to respond with an ACK to unicast frames.

Fixes #1747
2016-07-17 00:04:07 +01:00
George Oikonomou
dcad5e7e3f Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou
fe571c7dc3 Merge pull request #1754 from atiselsts/enhancement/cc26xx_reduced_guard_time
CC26xx: change default TSCH guard time to 1.8ms
2016-07-16 19:47:16 +01:00
Atis Elsts
081ec100a4 TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received 2016-07-16 18:08:41 +01:00
Antonio Lignan
0d0e726b38 Merge pull request #1764 from alignan/pull/zoul-dht22
Added DHT22 sensor to Zoul-based platforms
2016-07-15 12:50:34 -05:00
Robert Olsson
a8aa778b31 Removed unused file platform/avr-rss2/dev/ds18b20.c 2016-07-15 13:17:40 +02:00
Oliver Schmidt
98a795b967 Merge pull request #1730 from groessler/something_to_pull
Some 6502 target changes
2016-07-06 09:17:39 +02:00
Antonio Lignan
d5e2a779d4 Added DHT22 sensor to Zoul-based platforms 2016-07-04 18:00:09 +02:00
Antonio Lignan
6360a09cc7 Merge pull request #1726 from feshie/pr-zoul-motes-flash-fix
zoul: Add support for flashing to multiple devices
2016-06-30 12:13:41 +02:00
Antonio Lignan
17d784ead3 Merge pull request #1745 from alignan/pull/z1-contiki-conf
Minor changes to z1/contiki-conf.h
2016-06-30 09:47:16 +02:00
Atis Elsts
b6617f17c5 CC26xx: always request HF crystal oscillator at radio on() 2016-06-29 16:41:33 +03:00
George Oikonomou
91255f5a81 Merge pull request #1711 from xukai871105/master
One fix to sensorTag board_i2c.c
2016-06-28 23:55:02 +01:00
Atis Elsts
1e4141b589 CC26xx: change default TSCH guard time to 1.8ms 2016-06-29 01:14:12 +03:00
George Oikonomou
3a105f2141 Disable CC2650_FAST_RADIO_STARTUP by default
`CC2650_FAST_RADIO_STARTUP` is required for TSCH, but it currently breaks ContikiMAC. We set the default value to the one that will work with the default choice of RDC.

Fixes #1744
2016-06-27 17:20:26 +01:00
Arthur Fabre
ab1652648e zoul: Add support for flashing to multiple devices
This adds support for flashing to multiple devices, by implementing the
$MOTES option used by the Z1.
This replaces the $PORT interface, as it only allowed flashing to one
device at a time, and the $MOTES interface was still used for other
tasks (such as getting a list of connected devices).

A foreach loop is used to dynamically create an upload rule per device
that needs to be flashed.
The "main" upload rule depends on the device specific ones.
This allows for parallel flashing.

The PORT variable can still be sued for backwards compatibility.

Changed the MOTES variable that makes a $(shell) call to not be
recursively expanded.
2016-06-27 11:23:45 +01:00
Antonio Lignan
108e43b103 Made configuration parameters easily overridable to be consistent with Travis CI tests 2016-06-25 23:17:26 +02:00
Antonio Lignan
99822545c5 Added BOARD_STRING to the Z1 platform 2016-06-24 23:58:32 +02:00