Commit Graph

60 Commits

Author SHA1 Message Date
David Kopf
bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf
94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf
09db159876 128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on 2011-08-18 14:36:04 -04:00
David Kopf
577215deca Use 128rfa1 interrupts instead of timing.
Generalize DEBUGFLOW macro for use in multiple routines.
2011-08-15 15:06:38 -04:00
David Kopf
50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf
cdcb2c4744 CCA measurement was always returning busy 2011-08-06 13:48:52 -04:00
David Kopf
6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
David Kopf
0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
HATATANI Shinta
f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
David Kopf
6b434a553f Implement SRAM routine of Georg von Zengen 2011-06-21 13:03:58 -04:00
dak664
581d081ffe Don't use RF230_CONF_CCA_THRES if it is not defined. 2011-04-07 17:44:10 -04:00
dak664
a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
dak664
5dd7500d0b Add configurable auto cca threshold and implement driver cca call.
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664
0b2d3d1615 Refactor clock code with optional interrupt optimizing.
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664
5c098993df Add initial file 2011-02-07 20:30:47 -05:00
dak664
f1f32c8e6a Add combined MCU and radio ATmega128rfa1 2011-02-07 13:46:34 -05:00
dak664
662b0e064c Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes. 2010-12-22 22:49:16 +00:00
dak664
5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664
e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson.
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
dak664
570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
dak664
1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
dak664
c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions.
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
dak664
110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
dak664
cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
adamdunkels
3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
dak664
01a3912864 Define and use radio STATE_TRANSITION, improve debug messaging 2010-03-02 16:29:59 +00:00
dak664
d61676b8f7 Add RADIOALWAYSON to monitor packet losses with low power protocols 2010-02-28 21:19:33 +00:00
dak664
5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664
844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664
4ded42db1e Add sniffer and 802 frame reporting 2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da Make RF230BB the default radio driver 2010-02-23 02:01:46 +00:00
dak664
cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
dak664
fee5efb141 additions for cxmac 2010-02-18 17:20:50 +00:00
dak664
893a31f49b Jackdaw additions 2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6 Add RADIOSTATS 2010-02-12 18:00:30 +00:00
dak664
a6ab27402a Add RADIOSTATS 2010-02-12 16:41:02 +00:00
joxe
3e8c63cc09 added radio-makefile for avr + rf230 platforms 2009-09-07 12:05:12 +00:00
dak664
c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664
c62efce258 Add useful comment, fix compiler warnings 2009-07-17 13:47:10 +00:00
dak664
1de298c72a *** empty log message *** 2009-07-08 16:17:07 +00:00
dak664
9aee8dbc16 Fixed bug of no current consequence 2009-07-05 18:50:44 +00:00
adamdunkels
65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00