nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
nifi
1c6264fddc
reordered build path to use cpu files before core
2009-04-06 13:10:14 +00:00
nifi
43c2ccf5d8
fixed clock_seconds to use full 32 bit
2009-04-06 13:08:42 +00:00
nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
fros4943
38b38edf95
added method for faking mote output in tests: mostly used for debugging
2009-04-03 17:05:14 +00:00
fros4943
b2a98f49e6
+ constructor option for not automatically throwing "requires visualization" exception
2009-04-03 17:03:42 +00:00
adamdunkels
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
nvt-se
d936dc1d09
print the time of the test.
2009-04-03 11:12:17 +00:00
joxe
4f41b30b2b
fixed variable names
2009-04-02 22:39:29 +00:00
joxe
7d2a08b29c
added initial set-up code SFD capture interrupts usable for exact packet timestamping
2009-04-02 22:23:06 +00:00
nvt-se
4507891ed5
made gc on removal configurable since it decreases wear levelling.
...
cleaned up some code.
2009-04-02 14:20:04 +00:00
nvt-se
1425537a13
Introduced two garbage collection mode: greedy and reluctant.
...
The greedy GC mode attempts to erase as many sectors as possible, and
it is therefore a slow operation, since the flash driver must wait
for about a second after erasing one sector. The former behavior was
to always do a greedy GC if file reservations fails due to lack of space.
The new reluctant GC stops after erasing one sector, and therefore
we often do not have to wait if there is no file system operation
in the time while the sector is being erased. We call the garbage collector
using this mode when removing a file that is not a micro log file, since
the remove function is called recursively for micro log files that are
erased because the corresponding ordinary file is erased.
This change increases the coffee test (examples/sky/test-coffee.c) speed
from 9 to 5 seconds.
2009-04-02 11:22:23 +00:00
fros4943
b730fb329d
changed upload rules due to problems on linux platforms
2009-04-02 11:15:30 +00:00
nvt-se
ca617f5559
updated the documentation.
2009-04-02 10:35:08 +00:00
fros4943
188ce975ca
radio logger plugin facelift: display the original packet data instead of only the converted data.
...
this allows viewing all bytes sent from for example sky motes, including radio/mac headers
2009-04-01 23:40:00 +00:00
fros4943
2ac3662ea8
sky motes output the new converted radio packets
2009-04-01 23:37:27 +00:00
fros4943
0a740aad63
documentation update
2009-04-01 23:35:23 +00:00
fros4943
5eddd2d095
added converted radio packet, containing both the original and the converted data
2009-04-01 23:34:45 +00:00
fros4943
e3bf2b58a6
logging connection start time
2009-04-01 23:33:05 +00:00
fros4943
3b3580e439
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 18:11:48 +00:00
fros4943
9b41b02de1
added another ipv6 udp test:
...
identical setup as the sky_ipv6_udp test, but with contiki motes (native ipv6)
2009-04-01 18:09:20 +00:00
fros4943
e4858a2ade
update ip interface to supports ipv6 addresses.
...
also disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 17:43:17 +00:00
fros4943
aa736322e1
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
2009-04-01 17:17:55 +00:00
fros4943
0e732f8dba
removed old uip/uaodv comm stack, added uipv6
2009-04-01 14:02:44 +00:00
fros4943
def81a5d02
remember last source file
2009-04-01 14:01:45 +00:00
fros4943
fe1f594d73
activated communication stack selection for contiki mote types
2009-04-01 14:00:00 +00:00
fros4943
5ed4a247f7
highlight all destination motes when clicked
2009-04-01 13:53:37 +00:00
fros4943
e0eaeb0d8b
bugfix: no visualizer may be selected when simulation is reloaded
2009-04-01 13:51:50 +00:00
fros4943
3665422d8d
simplified cooja communication stacks initialization + added uipv6 stack
2009-04-01 13:50:12 +00:00
fros4943
6a99a82516
copied uipv6 configuration from native platform
2009-04-01 13:46:56 +00:00
fros4943
1c031504e5
no need to initialize serial line
2009-04-01 13:46:16 +00:00
fros4943
892bfb5678
moved radio-uip link functionality directly to comm stack sources
2009-04-01 13:45:41 +00:00
fros4943
eddd8350c5
renamed radio driver
2009-04-01 13:44:34 +00:00
fros4943
afed9bb2d0
icnlude packet radio by default
2009-04-01 13:39:54 +00:00
fros4943
1536c83f2f
added serial line init
2009-04-01 13:38:14 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
adamdunkels
dc8338d248
Fixed alignment problem on the MSP430, where the ping message may be misaligned
2009-03-31 17:39:36 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nifi
c6b15c289e
* show radio channel at startup
...
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943
13b6fe2cd5
added experimental packet counters
2009-03-26 16:24:31 +00:00
fros4943
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
