adamdunkels
51ecb15435
Example code for using the shell netperf command
2009-11-03 22:56:27 +00:00
adamdunkels
6a8443b46b
Removed Rime ping command to save flash space, added the single-hop Rime debug commands instead
2009-10-27 14:13:30 +00:00
adamdunkels
e14a30262c
Updated the Rime channel numbers so that all examples can be run in the same network without channel clashes
2009-10-18 17:52:08 +00:00
adamdunkels
f97cbce055
Added broadcast example for completeness
2009-10-18 17:49:24 +00:00
zhitao
30875da288
a little faster autoconfiguration
2009-10-16 15:13:25 +00:00
nvt-se
8d4021529c
Added a generic file-upload command. shell-upload only takes .ce files.
2009-09-29 15:46:38 +00:00
nifi
6b60454f2d
cleaned up error messages and break at first error
2009-09-21 14:14:46 +00:00
nvt-se
f3e304ec40
Removed duplicate test return value.
2009-09-17 14:32:57 +00:00
zdshelby
83988ef554
- Removed rime_test from the Makefile
2009-09-09 07:34:53 +00:00
zdshelby
0e9220716e
Initial commit of examples for the Sensinode/cc2430 platform.
2009-09-08 19:47:50 +00:00
nifi
d4b619bcc5
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
2009-09-07 11:31:26 +00:00
nifi
6680d2c6c2
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
2009-09-01 09:29:40 +00:00
dak664
ed9d31ef7c
Add documentation
2009-07-23 23:51:36 +00:00
dak664
42a9e1e2e0
Add Huginn and Muninn web content
2009-07-23 16:21:56 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
e0138add63
Remove signature bytes from hex file
2009-07-08 21:46:13 +00:00
dak664
49989dbe45
Add rf230bb radio driver with conditional make on RF230BB=1
2009-07-08 15:26:17 +00:00
nifi
89ce58f576
fixed debug output to show the correct remote address
2009-06-29 12:31:03 +00:00
nifi
74ccc5a732
replaced DEFAULT_TARGET with Makefile.target for specifying default target
2009-06-26 12:11:26 +00:00
nifi
f0a3477dd2
replaced DEFAULT_TARGET with Makefile.target for specifying default target
2009-06-26 12:04:46 +00:00
fros4943
501416fca0
disabled rime commands to decrease rom usage
2009-06-26 09:51:18 +00:00
joxe
3b97f72c0c
added makefile with saved target
2009-06-23 21:03:13 +00:00
dak664
728c482cc3
remove .fuse section from hex file, add mcu
2009-06-19 18:46:41 +00:00
adamdunkels
617eae6ca1
Removed the debug and sniff commands to make code size smaller so that the compiled binary fits in ROM
2009-06-18 09:01:16 +00:00
adamdunkels
4c22ef33d0
Moved compile-platforms from examples/ to tools/release-tools
2009-06-18 08:40:57 +00:00
fros4943
7741d58cdb
minor fix: removed superfluous etimer_reset
2009-06-09 19:31:55 +00:00
fros4943
45e3b5a8b3
transmit with random intervals: 2-4 seconds
2009-06-09 09:27:03 +00:00
c_oflynn
0946203c57
Remove fuses from .hex, Pass MCU name to avr-size
2009-06-02 21:58:32 +00:00
nvt-se
f115894193
switched to larger type size for the file size.
...
use AND on characters read back since the file size is larger than 255 bytes.
2009-05-26 13:48:32 +00:00
adamdunkels
7bd7cd64b3
Rewrote the webserver so that sensor data is loaded using Ajax-style XmlHttpRequest and that a spinner icon is shown when the data is loaded
2009-05-11 17:38:29 +00:00
adamdunkels
e6d2fada05
Added the tweet command
2009-05-11 17:37:15 +00:00
adamdunkels
d1b97feb88
Added a telnet server with Twitter commands
2009-05-11 17:36:13 +00:00
adamdunkels
381beac299
Code style fixes
2009-05-06 15:03:49 +00:00
nvt-se
3eac697f85
fixed a compiler warning by providing an int type of the argument to
...
printf, as specified by the format.
2009-05-04 22:09:52 +00:00
joxe
eec984dfe3
minor bugfix - added process_pause
2009-04-25 22:38:00 +00:00
joxe
889a2bb024
minor improvements
2009-04-25 10:21:51 +00:00
joxe
19a30284e5
fixed minor bug in viewer
2009-04-25 10:04:38 +00:00
joxe
d8d7e9142d
added a hi-res RSSI scanner and viewer for sky/jcreate
2009-04-25 09:41:37 +00:00
fros4943
0d82fcb143
contiki shell example with only platform independent commands
2009-04-23 08:42:07 +00:00
fros4943
71c3c8e86c
enabled download and sendcmd commands + cleanup
2009-04-20 13:08:56 +00:00
nvt-se
d86ee2c665
changed address setup slightly.
2009-04-10 16:51:16 +00:00
nvt-se
73d5025e04
changed udp examples into a client and a server, added multi-hop routing,
...
clarified the code.
2009-04-09 21:35:38 +00:00
nvt-se
2eaec8d38a
print the file version more seldom.
2009-04-07 15:14:17 +00:00
nvt-se
d936dc1d09
print the time of the test.
2009-04-03 11:12:17 +00:00
nvt-se
ca617f5559
updated the documentation.
2009-04-02 10:35:08 +00:00
fros4943
4706ddf023
exec shell command and elfloader example
2009-03-26 12:46:19 +00:00
adamdunkels
ebbae099ce
A program that displays the number of neighbors on the JCreate LEDs
2009-03-24 19:45:46 +00:00
adamdunkels
d0b969ec5a
Rewrote the multihop example to better show how to use the multihop layer. Now also shows how to use the memb, list, and annoncement mechanisms.
2009-03-23 18:10:09 +00:00
adamdunkels
61d33173a3
Renamed the serial module to serial-line
2009-03-18 07:20:18 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
zhitao
77c8524aa5
wait until rime finishes forwarding to send
2009-03-10 14:36:48 +00:00
adamdunkels
151853ca37
Added example announcement code
2009-03-08 20:27:42 +00:00
fros4943
659c7e7311
added webserver-nogui source and WITH_NULLMAC to example code (too large otherwise)
2009-03-03 17:25:33 +00:00
fros4943
6c1207c5d5
updated runicast example: added sender history to detect duplicate callbacks
2009-03-03 12:28:39 +00:00
oliverschmidt
b4d6dd6893
Added webserver and irc.
2009-03-01 23:37:49 +00:00
nvt-se
75d8c75768
use more suitable process name.
2009-02-27 19:32:28 +00:00
nvt-se
a0226e2418
switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)
2009-02-27 14:28:02 +00:00
fros4943
a6fc125b64
printing local ipv6 address at startup. addresses must match in order for the examples to work
2009-02-26 09:02:09 +00:00
nvt-se
31bc37a043
Added Deluge and tests for it.
2009-02-25 17:00:00 +00:00
fros4943
90767a76b3
moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6
...
* transmitting human readable strings between the two processes
* remote address configurable at compile time via DEFINES=...
2009-02-25 12:11:17 +00:00
fros4943
cb56161c94
moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6
2009-02-25 12:10:10 +00:00
nvt-se
3f71499c96
format first to get deterministic results.
2009-02-22 15:17:36 +00:00
nvt-se
a2d651af72
seek test (-25) failed sometimes because it assumed a default file size of 8kb. reserve the file instead so the default doesn't matter.
2009-02-17 15:08:01 +00:00
fros4943
ab61e8b8b5
bugfix: including random.h to avoid random_rand() assumed signed, and timer intervals becoming very very small
2009-02-17 08:44:44 +00:00
adamdunkels
0d699abe79
Disabled checkpointing for the default sky-shell build to reduce object code size, instead added a separate sky-checkpoint build with checkpointing but without the 'sky-alldata' command
2009-02-14 22:53:00 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9c4d2da561
Bugfix: it is etimer_reset() that makes timer behavior stable, not etimer_restart()
2009-02-07 22:38:01 +00:00
adamdunkels
67f649c4aa
Use etimer_restart() to avoid synchronization effects from the abc_send() invocation taking time to complete
2009-02-07 22:28:25 +00:00
adamdunkels
c10ae7b6dc
Increased the inter-packet time to work better on the sky platform
2009-02-07 16:17:33 +00:00
adamdunkels
2e55bb5151
Removed the blink process to make the code simpler, added randomness to the transmission intervals
2009-02-06 10:12:52 +00:00
fros4943
1795dbf199
added checkpoint and rollback commands:
...
writes/reads checkpoint images from file system.
(temporarily disabled rime debug and sniff commands)
2009-02-04 17:54:28 +00:00
julienabeille
2218d8ef8b
Added an application and example to run IPSo interoperability test using RAVEN boards
2009-01-27 10:57:28 +00:00
nifi
4eebe9afd9
Updated to match new mesh API. Thanks to Carlo Alberto Boano for fixing.
2009-01-19 13:24:42 +00:00
nifi
677dd296a6
Updated to match new multihop API. Thanks to Carlo Alberto Boano for fixing.
2009-01-16 17:40:16 +00:00
adamdunkels
fdf5836763
Example shell for the Sentilla JCreate
2009-01-15 22:11:58 +00:00
fros4943
008d4ba33f
sky example running both webserver and serial shell (overrides default slip handler)
2009-01-15 13:18:19 +00:00
nifi
0371d20a40
updated for new rimeaddr API
2008-12-16 17:05:14 +00:00
nifi
52c2f23e28
CLOCK_CONF_SECOND must be a power of two for MSP430 platforms (see cpu/msp430/clock.c for details)
2008-12-16 16:53:04 +00:00
nvt-se
747d27ecda
updated cooja/mspsim test for coffee. now with GC
2008-12-12 13:24:42 +00:00
nvt-se
1f03e79a89
added a simple garbage collection test.
2008-12-12 10:28:11 +00:00
adamdunkels
f0f9314e7e
Reversed byte order to match the old ->u16 approach to make the automated tests & scripts work again
2008-12-02 08:09:46 +00:00
adamdunkels
c0ce2efd89
Removed the rimeaddr ->u16 field
2008-12-01 15:19:11 +00:00
adamdunkels
a847ff738d
Removed reliance on the ->u16 field in rimeaddr
2008-12-01 14:17:36 +00:00
adamdunkels
33bf01534c
Rewrote code that used the old ->u16 field in rimeaddr_t to access Rime addresses to use rimeaddr_copy() and the ->u8 field instead
2008-11-30 18:36:55 +00:00
nifi
1865f13f3a
fixed more robust parsing
2008-11-26 14:22:54 +00:00
nvt-se
1a87d5a661
use new remove function name.
2008-11-24 10:59:40 +00:00
fros4943
a02a2e998a
added sky support for multi-threading example
2008-11-21 10:36:16 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
nvt-se
636bf70a8c
added append test.
2008-11-13 14:46:50 +00:00
fros4943
3033201d24
longer send period + forcing example to wait until an ongoing transmission is finished before initiating a new transmission
2008-11-11 13:50:21 +00:00
fros4943
92ecda2202
using the same addresses in both netsim and non-netsim
2008-11-11 11:25:39 +00:00
oliverschmidt
57f8e86532
Minor formatting change.
2008-11-10 22:47:10 +00:00
oliverschmidt
c109e102c4
Include wget shell command in "standard" shell environments.
2008-11-10 22:10:32 +00:00
adamdunkels
de601c9523
Added battery voltage level readout & SHT11 low-voltage indicator
2008-11-10 21:14:20 +00:00
adamdunkels
5e772838eb
Remove debug printouts. Increase neighbor advertisement timers.
2008-11-06 08:24:20 +00:00
adamdunkels
2ac1c3e231
avr-raven needs to be built with uIPv6 - this should hopefully fix the nightly builds
2008-10-30 21:28:20 +00:00
adamdunkels
de084cecfb
Corrected mistake in the avr makefile target
2008-10-17 20:23:32 +00:00
adamdunkels
e3c1d488be
Added avr-raven to compilation targets
2008-10-17 17:55:13 +00:00
nvt-se
ea9c3ab98c
allow in-page offets
2008-10-16 10:14:41 +00:00
c_oflynn
778f51f445
Change makefile to build with just 'make'
2008-10-15 20:52:03 +00:00
