Commit Graph

30 Commits

Author SHA1 Message Date
Mariano Alvira
3e5afa2b59 replace MAC_CONF_CHANNEL_CHECK_RATE with
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE for redbee-dev and econotag

Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
2011-09-06 07:49:23 -04:00
Mariano Alvira
6c0bbc492b change mc1322x rtimers to 32-bit
hardcode a close default value for the RTC
2011-09-02 12:32:47 -04:00
David Kopf
3c18372939 Add periodic prints and stack monitor 2011-08-24 10:55:58 -04:00
Mariano Alvira
697af5ef08 adding tmp102 sensor for the econotag from Hedde Bosman.
This can be pulling in as a common driver if we can make a generic i2c
Contiki driver.
2011-07-18 07:30:49 -04:00
Mariano Alvira
e80f9eb4b5 mc1322x: build fixes for uart2 2011-07-08 19:40:42 -04:00
Mariano Alvira
cb29a9c667 add leds and button capabilities to the econotag. 2011-05-27 11:01:54 -04:00
Mariano Alvira
e2d9082fc7 factor maca hw autoack and nullrdc hw autoack config 2011-05-08 09:50:57 -04:00
Mariano Alvira
65671c66c6 turn on insert ack packet by default 2011-05-08 09:50:57 -04:00
dak664
2e14df3981 Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6. 2011-04-08 15:15:16 -04:00
Mariano Alvira
0af24040f1 econotag: add an option to use the watchdog timer 2011-03-22 16:35:54 -04:00
Mariano Alvira
59768e7bc7 econotag: fix problem with how IAB based mac addresses are formed 2011-03-13 17:48:47 -04:00
Mariano Alvira
05a4961604 econotag: generate EUI64 mac adresses properly 2011-02-23 15:20:08 -08:00
Mariano Alvira
e9c904a74c econotag: turn DEBUG off by default 2011-02-23 15:19:44 -08:00
Mariano Alvira
c2c70a22df mc1322x: setup hardware addresses and enable AUTOACK mode if
configured
2011-02-23 15:19:44 -08:00
Mariano Alvira
e826ccd3b9 add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK
status but not the actual ack packet.
2011-02-23 15:19:44 -08:00
Mariano Alvira
ad200384ac add a dummy light sensor for econotag 2011-02-08 09:07:45 -05:00
Mariano Alvira
227b72c88d add dummy node-id.h for econotag 2011-02-08 09:07:34 -05:00
Mariano Alvira
9572baa71b fix mc13224v led driver to only touch gpio used for leds. 2011-02-08 09:07:11 -05:00
Mariano Alvira
dbe6407a22 change mc13224v button-sensor to use gpio structs 2011-02-08 09:07:03 -05:00
nifi
3bd78893e5 Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.

nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
maralvira
5b4c63440b fix typos 2010-11-09 01:30:38 +00:00
maralvira
3747f9a7c5 use the nullmac and nullrdc with framer layer. 2010-11-07 18:36:52 +00:00
maralvira
e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira
26725e7c19 use sicslowmac_driver instead of contikimac_driver --- since contikimac
power saving doesn't seem to be working.
2010-11-07 13:46:03 +00:00
maralvira
1cfa126568 enable sicslowpan fragmentation 2010-07-28 18:51:27 +00:00
maralvira
fe16506d1d increase UIP buffer size to 1300 to allow full size ipv6 packets 2010-07-28 18:51:00 +00:00
maralvira
8dce85c308 don't need BLOCKING_TX anymore with the recent bugfixes 2010-07-28 18:50:07 +00:00
maralvira
994067aecd bring econotag conf in-sync with sky.
Increase the size of the route and neighbor tables; remove the uIP
packet buffer queue for every neighbor to save RAM
2010-06-14 15:56:09 +00:00
maralvira
c01421fbb5 update process initialization and call ctimer_init 2010-06-09 18:05:38 +00:00
maralvira
7aa44f14d9 initial redbee-econotag commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:46:30 +00:00