Commit Graph

53 Commits

Author SHA1 Message Date
dak664
580efaa412 Fix compiler warning for unused variable 2011-05-18 11:22:25 -04:00
Salvatore Pitrulli
4fb433ac1f 'if' statement replaced by a preprocessor directive. 2011-05-12 21:50:47 +02:00
Adam Dunkels
af4ce9ba9e Bugfix: idle power consumption was sometimes misestimated for transmissions, when a duty cycle rtimer fired in the middle of a transmission 2011-04-13 14:10:02 +02:00
Adam Dunkels
733aaa546f Made the number of MAC sequence numbers to remember configurable; fixed bug with power attribution to the idle state. 2011-02-21 14:11:32 +01:00
Adam Dunkels
46348d9013 Added the low-power streaming mode where frequent channel checks are performed when streaming is on. Enabling this will (by setting WITH_STREAMING to 1), however, significantly slow down Cooja/MSPsim simulations. 2011-02-08 21:57:46 +01:00
adamdunkels
d51e99a3dd Updated streaming mode to use only about 20% radio. Made guard time more conservative due to problem report by Ricklef Wohlers. 2011-01-25 14:29:46 +00:00
adamdunkels
affba785b5 Enabled phase-lock only for channel check rates of 32 Hz or lower 2011-01-18 16:03:19 +00:00
adamdunkels
a0960154ba Cleaned up parts of the code; added comments 2011-01-09 21:07:01 +00:00
adamdunkels
79f2c25dae Rework of the phase-lock optimization mechanism. There were several bugs in the existing code, such as the phase-lock would lose synchronization when a packet was lost. 2010-12-16 22:43:07 +00:00
adamdunkels
af21afa750 Make sure that the cycle timing is exact 2010-12-10 13:36:06 +00:00
adamdunkels
c19a967973 Bugfix: with the recent bugfixes, it was no longer possible to turn duty cycling back on after it had been turned off 2010-12-07 23:12:54 +00:00
adamdunkels
4c9793f428 Let ContikiMAC remember the state that the radio should have when duty cycling is turned off. This fixes a bug in which the radio was turned on after sending, even when NETSTACK_RDC.off(0) was enabled. 2010-12-06 09:08:22 +00:00
adamdunkels
b7df18a96a Turned off streaming by default to save code space; made guard time a little more conservative 2010-11-02 11:00:08 +00:00
adamdunkels
73f5535754 Made the guard time slightly more conservative - found an occasion where this was needed 2010-10-24 21:06:17 +00:00
adamdunkels
9cb830ed37 Timing bugfix in the waiting period between channel samples to check if the coast is clear before sending a packet. 2010-10-20 22:25:24 +00:00
adamdunkels
ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels
3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
nifi
85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi
b26f45a35b code cleanup 2010-04-26 17:55:11 +00:00
nifi
d761b6e89a Added MAC header to handle padding 2010-04-26 17:46:21 +00:00
nifi
14b1bb9f57 Fixed to only use leds when DEBUG is set 2010-04-20 11:41:16 +00:00
adamdunkels
3670fac618 Bugfix: timing fixed 2010-04-08 18:23:24 +00:00
adamdunkels
91ff8574ad Improved handling of duplicate packets 2010-04-08 09:32:56 +00:00
adamdunkels
497111bcc9 Added an optional rate limit for broadcast transmissions 2010-04-06 11:57:43 +00:00
adamdunkels
e06a30fdb0 Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off 2010-04-05 19:28:07 +00:00
adamdunkels
a4c328785a Small timing tweaks 2010-04-04 21:01:24 +00:00
adamdunkels
62039a530d Removed non-existant cooja-debug.h include 2010-04-04 12:31:47 +00:00
adamdunkels
7d6ff0289e Fiddled more with the timing: the phase seems stable now at least. Still bugs left though... 2010-04-04 12:28:29 +00:00
adamdunkels
be117afe04 After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood! 2010-04-04 07:49:30 +00:00
adamdunkels
121ca946e1 Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable. 2010-04-03 13:28:30 +00:00
joxe
6ae86d001d made number of phase neighbors configurable 2010-04-01 17:17:36 +00:00
adamdunkels
add426de4b Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping. 2010-04-01 10:02:04 +00:00
adamdunkels
b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels
877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
adamdunkels
bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels
226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels
9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels
49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels
115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels
efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
adamdunkels
b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
adamdunkels
7bab9316da Two major changes:
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt
def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
adamdunkels
d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
adamdunkels
79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
nifi
5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
adamdunkels
410d860a93 Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up 2010-02-28 20:19:47 +00:00
adamdunkels
ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
nifi
c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels
ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00