contiki/platform/stm32nucleo-spirit1/hw-config.h
2015-10-09 19:40:39 +02:00

118 lines
5.5 KiB
C

/*
* Copyright (c) 2012, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
/*---------------------------------------------------------------------------*/
#ifndef __HW_CONFIG_H
#define __HW_CONFIG_H
/*---------------------------------------------------------------------------*/
#include "stm32l-spirit1-config.h"
/*---------------------------------------------------------------------------*/
#define UART_RxBufferSize 512
/*---------------------------------------------------------------------------*/
#define I2Cx I2C1
#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE()
#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
/*---------------------------------------------------------------------------*/
#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET()
#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET()
/*---------------------------------------------------------------------------*/
/* Definition for I2Cx Pins */
#define I2Cx_SCL_PIN GPIO_PIN_8
#define I2Cx_SCL_GPIO_PORT GPIOB
#define I2Cx_SDA_PIN GPIO_PIN_9
#define I2Cx_SDA_GPIO_PORT GPIOB
#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
/* Definition for I2Cx's NVIC */
#define I2Cx_EV_IRQn I2C1_EV_IRQn
#define I2Cx_ER_IRQn I2C1_ER_IRQn
#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler
#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler
#define I2Cx I2C1
#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE()
#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET()
#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET()
/* Definition for I2Cx Pins */
#define I2Cx_SCL_PIN GPIO_PIN_8
#define I2Cx_SCL_GPIO_PORT GPIOB
#define I2Cx_SDA_PIN GPIO_PIN_9
#define I2Cx_SDA_GPIO_PORT GPIOB
#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
/* Definition for I2Cx's NVIC */
#define I2Cx_EV_IRQn I2C1_EV_IRQn
#define I2Cx_ER_IRQn I2C1_ER_IRQn
#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler
#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler
/* User can use this section to tailor USARTx/UARTx instance used and associated
resources */
/* Definition for USARTx clock resources */
#define USARTx USART2
#define USARTx_CLK_ENABLE() __USART2_CLK_ENABLE();
#define DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE()
#define USARTx_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
#define USARTx_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
#define USARTx_FORCE_RESET() __USART2_FORCE_RESET()
#define USARTx_RELEASE_RESET() __USART2_RELEASE_RESET()
/* Definition for USARTx Pins */
#define USARTx_TX_PIN GPIO_PIN_2
#define USARTx_TX_GPIO_PORT GPIOA
#define USARTx_RX_PIN GPIO_PIN_3
#define USARTx_RX_GPIO_PORT GPIOA
/* Definition for USARTx's NVIC */
#define USARTx_IRQn USART2_IRQn
#define USARTx_IRQHandler USART2_IRQHandler
#define USARTx_TX_AF GPIO_AF7_USART2
#define USARTx_RX_AF GPIO_AF7_USART2
/* Enable sensor mask */
#define PRESSURE_SENSOR 0x00000001
#define TEMPERATURE_SENSOR 0x00000002
#define HUMIDITY_SENSOR 0x00000004
#define UV_SENSOR 0x00000008
#define ACCELEROMETER_SENSOR 0x00000010
#define GYROSCOPE_SENSOR 0x00000020
#define MAGNETIC_SENSOR 0x00000040
/*---------------------------------------------------------------------------*/
#endif /*__HW_CONFIG_H*/
/*---------------------------------------------------------------------------*/