mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-27 02:54:32 +00:00
6e7d52b5df
* Keep MPU_PWR low when the sensor is not in use * Deselect the sensor when not in use, in order to restore the I2C ping state * Explicitly control the MPU_INT pin * Don't shutdown the sensor when it's shut down * Remove explicit shutdown-related API extension. It is no longer required
111 lines
5.0 KiB
C
111 lines
5.0 KiB
C
/*
|
|
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup sensortag-cc26xx-peripherals
|
|
* @{
|
|
*
|
|
* \defgroup sensortag-cc26xx-mpu SensorTag 2.0 Motion Processing Unit
|
|
*
|
|
* Driver for the Invensense MPU9250 Motion Processing Unit.
|
|
*
|
|
* Due to the time required between triggering a reading and the reading
|
|
* becoming available, this driver is meant to be used in an asynchronous
|
|
* fashion. The caller must first activate the sensor by calling
|
|
* mpu_9250_sensor.configure(SENSORS_ACTIVE, xyz);
|
|
* The value for the xyz arguments depends on the required readings. If the
|
|
* caller intends to read both the accelerometer as well as the gyro then
|
|
* xyz should be MPU_9250_SENSOR_TYPE_ALL. If the caller only needs to take a
|
|
* reading from one of the two elements, xyz should be one of
|
|
* MPU_9250_SENSOR_TYPE_ACC or MPU_9250_SENSOR_TYPE_GYRO
|
|
*
|
|
* Calling .configure() will power up the sensor and initialise it. When the
|
|
* sensor is ready to provide readings, the driver will generate a
|
|
* sensors_changed event.
|
|
*
|
|
* Calls to .status() will return the driver's state which could indicate that
|
|
* the sensor is off, booting or on.
|
|
*
|
|
* Once a reading has been taken, the caller has two options:
|
|
* - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
|
|
* subsequent readings the sensor must be started up all over
|
|
* - Leave the sensor on. In this scenario, the caller can simply keep calling
|
|
* value() for subsequent readings, but having the sensor on will consume
|
|
* more energy, especially if both accelerometer and the gyro are on.
|
|
* @{
|
|
*
|
|
* \file
|
|
* Header file for the Sensortag-CC26XX Invensense MPU9250 motion processing unit
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifndef MPU_9250_SENSOR_H_
|
|
#define MPU_9250_SENSOR_H_
|
|
/*---------------------------------------------------------------------------*/
|
|
/* ACC / Gyro Axes */
|
|
#define MPU_9250_SENSOR_TYPE_GYRO_Z 0x01
|
|
#define MPU_9250_SENSOR_TYPE_GYRO_Y 0x02
|
|
#define MPU_9250_SENSOR_TYPE_GYRO_X 0x04
|
|
#define MPU_9250_SENSOR_TYPE_GYRO_ALL 0x07
|
|
|
|
#define MPU_9250_SENSOR_TYPE_ACC_Z 0x08
|
|
#define MPU_9250_SENSOR_TYPE_ACC_Y 0x10
|
|
#define MPU_9250_SENSOR_TYPE_ACC_X 0x20
|
|
#define MPU_9250_SENSOR_TYPE_ACC_ALL 0x38
|
|
|
|
#define MPU_9250_SENSOR_TYPE_MASK 0x3F
|
|
#define MPU_9250_SENSOR_TYPE_ACC 0x38
|
|
#define MPU_9250_SENSOR_TYPE_GYRO 0x07
|
|
|
|
#define MPU_9250_SENSOR_TYPE_NONE 0
|
|
#define MPU_9250_SENSOR_TYPE_ALL (MPU_9250_SENSOR_TYPE_ACC | \
|
|
MPU_9250_SENSOR_TYPE_GYRO)
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Accelerometer range */
|
|
#define MPU_9250_SENSOR_ACC_RANGE_2G 0
|
|
#define MPU_9250_SENSOR_ACC_RANGE_4G 1
|
|
#define MPU_9250_SENSOR_ACC_RANGE_8G 2
|
|
#define MPU_9250_SENSOR_ACC_RANGE_16G 3
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Accelerometer range configuration */
|
|
#ifdef MPU_9250_SENSOR_CONF_ACC_RANGE
|
|
#define MPU_9250_SENSOR_ACC_RANGE MPU_9250_SENSOR_CONF_ACC_RANGE
|
|
#else
|
|
#define MPU_9250_SENSOR_ACC_RANGE MPU_9250_SENSOR_ACC_RANGE_2G
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
extern const struct sensors_sensor mpu_9250_sensor;
|
|
/*---------------------------------------------------------------------------*/
|
|
#endif /* MPU_9250_SENSOR_H_ */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|