contiki/platform/stk501/Makefile.stk501
barner d4b3436d21 Add new plattform definition for the STK 501 board featuring an
Atmel ATmega128.

Very brief instructions:

- Configure your programmer etc. in Makefile.stk501
- Use 'make upload' to flash your STK501.
- Setup a SLIP connection to your board (on the first serial port)
  and make sure you can ping it.
- Use 'make loadable_prg.ko' to build a demo module.
- gcc -ocodeprop ../../tools/codeprop.c
- ./codeprop <IP of STK> loadable_prg.ko
- Watch the module print "Tick, Tack, Tick, ..." on the second
  serial port.
2006-12-22 17:19:22 +00:00

27 lines
788 B
Makefile

CONTIKI_TARGET_DIRS = . dev apps net loader
CONTIKI_CORE=contiki-stk501-main
CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
CONTIKI_TARGET_SOURCEFILES += rs232.c slip.c cfs-eeprom.c eeprom.c random.c \
mmem.c contiki-stk501-default-init-lowlevel.c \
contiki-stk501-default-init-net.c
CONTIKIAVR=$(CONTIKI)/cpu/avr
CONTIKIBOARD=.
MCU=atmega128
AVRDUDE_PROGRAMMER=jtag2
# For usb devices, you may either use PORT=usb, or (e.g. if you have more than one
# programmer connected) you can use the following trick to find out the serial number:
#
# The example is for an JTAGICE mkII used to program an ATmega128:
# avrdude -v -P usb:xxxx -c jtag2 -p atmega128
AVRDUDE_PORT=usb:00A0000010EB
# Additional avrdude options
# Verify off
AVRDUDE_OPTIONS=-V
include $(CONTIKIAVR)/Makefile.avr