mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-15 00:29:02 +00:00
790c253d6d
Define the available CC2538 devices and their features, and use them to define the linker script memory regions. The .nrdata output section is now always defined in order to trigger an error if it is used but no memory is available for it. The CC2538 device used by Contiki is made a configuration option, the CC2538SF53 device being the default. This makes more sense than defining the flash memory address and size as configuration options like previously, all the more not all values are possible and all the features are linked by each device. This change also makes it possible to: - use the correct SRAM parameters for the CC2538NF11, - know at build time if the AES, SHA, ECC and RSA hardware features are available on the selected CC2538 device. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
511 lines
14 KiB
C
511 lines
14 KiB
C
/**
|
|
* \addtogroup remote
|
|
* @{
|
|
*
|
|
* \file
|
|
* Configuration for the Re-Mote platform
|
|
*/
|
|
#ifndef CONTIKI_CONF_H_
|
|
#define CONTIKI_CONF_H_
|
|
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Include Project Specific conf */
|
|
#ifdef PROJECT_CONF_H
|
|
#include PROJECT_CONF_H
|
|
#endif /* PROJECT_CONF_H */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Compiler configuration and platform-specific type definitions
|
|
*
|
|
* Those values are not meant to be modified by the user
|
|
* @{
|
|
*/
|
|
#define CLOCK_CONF_SECOND 128
|
|
|
|
/* Compiler configurations */
|
|
#define CCIF
|
|
#define CLIF
|
|
|
|
/* Platform typedefs */
|
|
typedef uint32_t clock_time_t;
|
|
typedef uint32_t uip_stats_t;
|
|
|
|
/*
|
|
* rtimer.h typedefs rtimer_clock_t as unsigned short. We need to define
|
|
* RTIMER_CLOCK_LT to override this
|
|
*/
|
|
typedef uint32_t rtimer_clock_t;
|
|
#define RTIMER_CLOCK_LT(a,b) ((int32_t)((a)-(b)) < 0)
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Serial Boot Loader Backdoor configuration
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR
|
|
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR 1 /**<Enable the boot loader backdoor */
|
|
#endif
|
|
|
|
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN
|
|
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN 3 /**< Pin PA_3 (user button), activates the boot loader */
|
|
#endif
|
|
|
|
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH
|
|
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH 0 /**< A logic low level activates the boot loader */
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Watchdog Timer configuration
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef WATCHDOG_CONF_ENABLE
|
|
#define WATCHDOG_CONF_ENABLE 1 /**< Enable the watchdog timer */
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name USB 'core' configuration
|
|
*
|
|
* Those values are not meant to be modified by the user, except where stated
|
|
* otherwise
|
|
* @{
|
|
*/
|
|
#define CTRL_EP_SIZE 8
|
|
#define USB_EP1_SIZE 32
|
|
#define USB_EP2_SIZE 64
|
|
#define USB_EP3_SIZE 64
|
|
#define USB_ARCH_WRITE_NOTIFY 0
|
|
|
|
#ifndef USB_ARCH_CONF_DMA
|
|
#define USB_ARCH_CONF_DMA 1 /**< Change to Enable/Disable USB DMA */
|
|
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Generic Configuration directives
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef ENERGEST_CONF_ON
|
|
#define ENERGEST_CONF_ON 0 /**< Energest Module */
|
|
#endif
|
|
|
|
#ifndef STARTUP_CONF_VERBOSE
|
|
#define STARTUP_CONF_VERBOSE 1 /**< Set to 0 to decrease startup verbosity */
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name uDMA Configuration and channel allocations
|
|
*
|
|
* @{
|
|
*/
|
|
#define USB_ARCH_CONF_RX_DMA_CHAN 0 /**< USB -> RAM DMA channel */
|
|
#define USB_ARCH_CONF_TX_DMA_CHAN 1 /**< RAM -> USB DMA channel */
|
|
#define CC2538_RF_CONF_TX_DMA_CHAN 2 /**< RF -> RAM DMA channel */
|
|
#define CC2538_RF_CONF_RX_DMA_CHAN 3 /**< RAM -> RF DMA channel */
|
|
#define UDMA_CONF_MAX_CHANNEL CC2538_RF_CONF_RX_DMA_CHAN
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Character I/O Configuration
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef UART_CONF_ENABLE
|
|
#define UART_CONF_ENABLE 1 /**< Enable/Disable UART I/O */
|
|
#endif
|
|
|
|
#ifndef UART0_CONF_BAUD_RATE
|
|
#define UART0_CONF_BAUD_RATE 115200 /**< Default UART0 baud rate */
|
|
#endif
|
|
|
|
#ifndef UART1_CONF_BAUD_RATE
|
|
#define UART1_CONF_BAUD_RATE 115200 /**< Default UART1 baud rate */
|
|
#endif
|
|
|
|
#ifndef SLIP_ARCH_CONF_USB
|
|
#define SLIP_ARCH_CONF_USB 0 /**< SLIP over UART by default */
|
|
#endif
|
|
|
|
#ifndef CC2538_RF_CONF_SNIFFER_USB
|
|
#define CC2538_RF_CONF_SNIFFER_USB 0 /**< Sniffer out over UART by default */
|
|
#endif
|
|
|
|
#ifndef DBG_CONF_USB
|
|
#define DBG_CONF_USB 0 /**< All debugging over UART by default */
|
|
#endif
|
|
|
|
#ifndef SERIAL_LINE_CONF_UART
|
|
#define SERIAL_LINE_CONF_UART 0 /**< UART to use with serial line */
|
|
#endif
|
|
|
|
#if !SLIP_ARCH_CONF_USB
|
|
#ifndef SLIP_ARCH_CONF_UART
|
|
#define SLIP_ARCH_CONF_UART 0 /**< UART to use with SLIP */
|
|
#endif
|
|
#endif
|
|
|
|
#if !CC2538_RF_CONF_SNIFFER_USB
|
|
#ifndef CC2538_RF_CONF_SNIFFER_UART
|
|
#define CC2538_RF_CONF_SNIFFER_UART 0 /**< UART to use with sniffer */
|
|
#endif
|
|
#endif
|
|
|
|
#if !DBG_CONF_USB
|
|
#ifndef DBG_CONF_UART
|
|
#define DBG_CONF_UART 0 /**< UART to use for debugging */
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef UART1_CONF_UART
|
|
#define UART1_CONF_UART 0 /**< UART to use for examples relying on
|
|
the uart1_* API */
|
|
#endif
|
|
|
|
/* Turn off example-provided putchars */
|
|
#define SLIP_BRIDGE_CONF_NO_PUTCHAR 1
|
|
#define SLIP_RADIO_CONF_NO_PUTCHAR 1
|
|
|
|
#ifndef SLIP_ARCH_CONF_ENABLED
|
|
/*
|
|
* Determine whether we need SLIP
|
|
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
|
|
* keep using SLIP
|
|
*/
|
|
#if defined (UIP_FALLBACK_INTERFACE) || defined (CMD_CONF_OUTPUT)
|
|
#define SLIP_ARCH_CONF_ENABLED 1
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* When set, the radio turns off address filtering and sends all captured
|
|
* frames down a peripheral (UART or USB, depending on the value of
|
|
* CC2538_RF_CONF_SNIFFER_USB)
|
|
*/
|
|
#ifndef CC2538_RF_CONF_SNIFFER
|
|
#define CC2538_RF_CONF_SNIFFER 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief Define this as 1 to build a headless node.
|
|
*
|
|
* The UART will not be initialised its clock will be gated, offering some
|
|
* energy savings. The USB will not be initialised either
|
|
*/
|
|
#ifndef CC2538_CONF_QUIET
|
|
#define CC2538_CONF_QUIET 0
|
|
#endif
|
|
|
|
/* CC2538_CONF_QUIET is hard and overrides all other related defines */
|
|
#if CC2538_CONF_QUIET
|
|
#undef USB_SERIAL_CONF_ENABLE
|
|
#define USB_SERIAL_CONF_ENABLE 0
|
|
|
|
#undef UART_CONF_ENABLE
|
|
#define UART_CONF_ENABLE 0
|
|
|
|
#undef STARTUP_CONF_VERBOSE
|
|
#define STARTUP_CONF_VERBOSE 0
|
|
|
|
/* Little sanity check: We can't have quiet sniffers */
|
|
#if CC2538_RF_CONF_SNIFFER
|
|
#error "CC2538_RF_CONF_SNIFFER == 1 and CC2538_CONF_QUIET == 1"
|
|
#error "These values are conflicting. Please set either to 0"
|
|
#endif
|
|
#endif /* CC2538_CONF_QUIET */
|
|
|
|
/**
|
|
* \brief Enable the USB core only if we need it
|
|
*/
|
|
#ifndef USB_SERIAL_CONF_ENABLE
|
|
#define USB_SERIAL_CONF_ENABLE \
|
|
((SLIP_ARCH_CONF_USB & SLIP_ARCH_CONF_ENABLED) | \
|
|
DBG_CONF_USB | \
|
|
(CC2538_RF_CONF_SNIFFER & CC2538_RF_CONF_SNIFFER_USB))
|
|
#endif
|
|
|
|
/*
|
|
* If debugging and SLIP use the same peripheral, this will be 1. Don't modify
|
|
* this
|
|
*/
|
|
#if SLIP_ARCH_CONF_ENABLED
|
|
#define DBG_CONF_SLIP_MUX (SLIP_ARCH_CONF_USB == DBG_CONF_USB && \
|
|
(SLIP_ARCH_CONF_USB || \
|
|
SLIP_ARCH_CONF_UART == DBG_CONF_UART))
|
|
#endif
|
|
|
|
/*
|
|
* Automatic detection of whether a specific UART is in use
|
|
*/
|
|
#define UART_IN_USE_BY_SERIAL_LINE(u) (SERIAL_LINE_CONF_UART == (u))
|
|
#define UART_IN_USE_BY_SLIP(u) (SLIP_ARCH_CONF_ENABLED && \
|
|
!SLIP_ARCH_CONF_USB && \
|
|
SLIP_ARCH_CONF_UART == (u))
|
|
#define UART_IN_USE_BY_RF_SNIFFER(u) (CC2538_RF_CONF_SNIFFER && \
|
|
!CC2538_RF_CONF_SNIFFER_USB && \
|
|
CC2538_RF_CONF_SNIFFER_UART == (u))
|
|
#define UART_IN_USE_BY_DBG(u) (!DBG_CONF_USB && DBG_CONF_UART == (u))
|
|
#define UART_IN_USE_BY_UART1(u) (UART1_CONF_UART == (u))
|
|
|
|
#define UART_IN_USE(u) ( \
|
|
UART_CONF_ENABLE && \
|
|
(UART_IN_USE_BY_SERIAL_LINE(u) || \
|
|
UART_IN_USE_BY_SLIP(u) || \
|
|
UART_IN_USE_BY_RF_SNIFFER(u) || \
|
|
UART_IN_USE_BY_DBG(u) || \
|
|
UART_IN_USE_BY_UART1(u)) \
|
|
)
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/* board.h assumes that basic configuration is done */
|
|
#include "board.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name Network Stack Configuration
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef NETSTACK_CONF_NETWORK
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
|
#else
|
|
#define NETSTACK_CONF_NETWORK rime_driver
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
#endif /* NETSTACK_CONF_NETWORK */
|
|
|
|
#ifndef NETSTACK_CONF_MAC
|
|
#define NETSTACK_CONF_MAC csma_driver
|
|
#endif
|
|
|
|
#ifndef NETSTACK_CONF_RDC
|
|
#define NETSTACK_CONF_RDC contikimac_driver
|
|
#endif
|
|
|
|
/* Configure NullRDC for when it's selected */
|
|
#define NULLRDC_802154_AUTOACK 1
|
|
#define NULLRDC_802154_AUTOACK_HW 1
|
|
|
|
/* Configure ContikiMAC for when it's selected */
|
|
#define CONTIKIMAC_CONF_WITH_PHASE_OPTIMIZATION 0
|
|
#define WITH_FAST_SLEEP 1
|
|
|
|
#ifndef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
|
|
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
|
#endif
|
|
|
|
#ifndef NETSTACK_CONF_FRAMER
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
#define NETSTACK_CONF_FRAMER framer_802154
|
|
#else /* NETSTACK_CONF_WITH_IPV6 */
|
|
#define NETSTACK_CONF_FRAMER contikimac_framer
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
#endif /* NETSTACK_CONF_FRAMER */
|
|
|
|
/* This can be overriden to use the cc1120_driver instead */
|
|
#ifndef NETSTACK_CONF_RADIO
|
|
#define NETSTACK_CONF_RADIO cc2538_rf_driver
|
|
#endif
|
|
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name LPM configuration
|
|
* @{
|
|
*/
|
|
#ifndef LPM_CONF_ENABLE
|
|
#define LPM_CONF_ENABLE 1 /**< Set to 0 to disable LPM entirely */
|
|
#endif
|
|
|
|
/**
|
|
* \brief Maximum PM
|
|
*
|
|
* The SoC will never drop to a Power Mode deeper than the one specified here.
|
|
* 0 for PM0, 1 for PM1 and 2 for PM2
|
|
*/
|
|
#ifndef LPM_CONF_MAX_PM
|
|
#define LPM_CONF_MAX_PM 2
|
|
#endif
|
|
|
|
#ifndef LPM_CONF_STATS
|
|
#define LPM_CONF_STATS 0 /**< Set to 1 to enable LPM-related stats */
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name IEEE address configuration
|
|
*
|
|
* Used to generate our RIME & IPv6 address
|
|
* @{
|
|
*/
|
|
/**
|
|
* \brief Location of the IEEE address
|
|
* 0 => Read from InfoPage,
|
|
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
|
|
*/
|
|
#ifndef IEEE_ADDR_CONF_HARDCODED
|
|
#define IEEE_ADDR_CONF_HARDCODED 0
|
|
#endif
|
|
|
|
/**
|
|
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
|
|
* is defined as 1
|
|
*/
|
|
#ifndef IEEE_ADDR_CONF_ADDRESS
|
|
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
|
|
#endif
|
|
|
|
/**
|
|
* \brief Location of the IEEE address in the InfoPage when
|
|
* IEEE_ADDR_CONF_HARDCODED is defined as 0
|
|
* 0 => Use the primary address location
|
|
* 1 => Use the secondary address location
|
|
*/
|
|
#ifndef IEEE_ADDR_CONF_USE_SECONDARY_LOCATION
|
|
#define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 0
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name RF configuration
|
|
*
|
|
* @{
|
|
*/
|
|
/* RF Config */
|
|
#ifndef IEEE802154_CONF_PANID
|
|
#define IEEE802154_CONF_PANID 0xABCD
|
|
#endif
|
|
|
|
#ifndef CC2538_RF_CONF_CHANNEL
|
|
#define CC2538_RF_CONF_CHANNEL 25
|
|
#endif /* CC2538_RF_CONF_CHANNEL */
|
|
|
|
#ifndef CC2538_RF_CONF_AUTOACK
|
|
#define CC2538_RF_CONF_AUTOACK 1 /**< RF H/W generates ACKs */
|
|
#endif /* CC2538_CONF_AUTOACK */
|
|
|
|
#ifndef CC2538_RF_CONF_TX_USE_DMA
|
|
#define CC2538_RF_CONF_TX_USE_DMA 1 /**< RF TX over DMA */
|
|
#endif
|
|
|
|
#ifndef CC2538_RF_CONF_RX_USE_DMA
|
|
#define CC2538_RF_CONF_RX_USE_DMA 1 /**< RF RX over DMA */
|
|
#endif
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name IPv6, RIME and network buffer configuration
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/* Don't let contiki-default-conf.h decide if we are an IPv6 build */
|
|
#ifndef NETSTACK_CONF_WITH_IPV6
|
|
#define NETSTACK_CONF_WITH_IPV6 0
|
|
#endif
|
|
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
/* Addresses, Sizes and Interfaces */
|
|
/* 8-byte addresses here, 2 otherwise */
|
|
#define LINKADDR_CONF_SIZE 8
|
|
#define UIP_CONF_LL_802154 1
|
|
#define UIP_CONF_LLH_LEN 0
|
|
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
|
|
|
/* TCP, UDP, ICMP */
|
|
#ifndef UIP_CONF_TCP
|
|
#define UIP_CONF_TCP 1
|
|
#endif
|
|
#ifndef UIP_CONF_TCP_MSS
|
|
#define UIP_CONF_TCP_MSS 64
|
|
#endif
|
|
#define UIP_CONF_UDP 1
|
|
#define UIP_CONF_UDP_CHECKSUMS 1
|
|
#define UIP_CONF_ICMP6 1
|
|
|
|
/* ND and Routing */
|
|
#ifndef UIP_CONF_ROUTER
|
|
#define UIP_CONF_ROUTER 1
|
|
#endif
|
|
|
|
#define UIP_CONF_ND6_SEND_RA 0
|
|
#define UIP_CONF_IP_FORWARD 0
|
|
#define RPL_CONF_STATS 0
|
|
|
|
#ifndef RPL_CONF_OF
|
|
#define RPL_CONF_OF rpl_mrhof
|
|
#endif
|
|
|
|
#define UIP_CONF_ND6_REACHABLE_TIME 600000
|
|
#define UIP_CONF_ND6_RETRANS_TIMER 10000
|
|
|
|
#ifndef NBR_TABLE_CONF_MAX_NEIGHBORS
|
|
#define NBR_TABLE_CONF_MAX_NEIGHBORS 20
|
|
#endif
|
|
#ifndef UIP_CONF_MAX_ROUTES
|
|
#define UIP_CONF_MAX_ROUTES 20
|
|
#endif
|
|
|
|
/* uIP */
|
|
#ifndef UIP_CONF_BUFFER_SIZE
|
|
#define UIP_CONF_BUFFER_SIZE 1300
|
|
#endif
|
|
|
|
#define UIP_CONF_IPV6_QUEUE_PKT 0
|
|
#define UIP_CONF_IPV6_CHECKS 1
|
|
#define UIP_CONF_IPV6_REASSEMBLY 0
|
|
#define UIP_CONF_MAX_LISTENPORTS 8
|
|
|
|
/* 6lowpan */
|
|
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
|
#ifndef SICSLOWPAN_CONF_COMPRESSION_THRESHOLD
|
|
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD 63
|
|
#endif
|
|
#ifndef SICSLOWPAN_CONF_FRAG
|
|
#define SICSLOWPAN_CONF_FRAG 1
|
|
#endif
|
|
#define SICSLOWPAN_CONF_MAXAGE 8
|
|
|
|
/* Define our IPv6 prefixes/contexts here */
|
|
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
|
|
#ifndef SICSLOWPAN_CONF_ADDR_CONTEXT_0
|
|
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 { \
|
|
addr_contexts[0].prefix[0] = 0xaa; \
|
|
addr_contexts[0].prefix[1] = 0xaa; \
|
|
}
|
|
#endif
|
|
|
|
#define MAC_CONF_CHANNEL_CHECK_RATE 8
|
|
|
|
#ifndef QUEUEBUF_CONF_NUM
|
|
#define QUEUEBUF_CONF_NUM 8
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
#else /* NETSTACK_CONF_WITH_IPV6 */
|
|
/* Network setup for non-IPv6 (rime). */
|
|
#define UIP_CONF_IP_FORWARD 1
|
|
|
|
#ifndef UIP_CONF_BUFFER_SIZE
|
|
#define UIP_CONF_BUFFER_SIZE 108
|
|
#endif
|
|
|
|
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
|
|
|
|
#ifndef QUEUEBUF_CONF_NUM
|
|
#define QUEUEBUF_CONF_NUM 8
|
|
#endif
|
|
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
#endif /* CONTIKI_CONF_H_ */
|
|
|
|
/** @} */
|