mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-28 07:28:58 +00:00
257 lines
9.3 KiB
C
257 lines
9.3 KiB
C
/*
|
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
|
* to the MC1322x project (http://mc1322x.devl.org)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
|
* for details.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#ifndef TMR_H
|
|
#define TMR_H
|
|
|
|
#include "utils.h"
|
|
|
|
/* Timer registers are all 16-bit wide with 16-bit access only */
|
|
#define TMR_OFFSET (0x20)
|
|
#define TMR_BASE (0x80007000)
|
|
#define TMR0_BASE (TMR_BASE)
|
|
#define TMR1_BASE (TMR_BASE + TMR_OFFSET*1)
|
|
#define TMR2_BASE (TMR_BASE + TMR_OFFSET*2)
|
|
#define TMR3_BASE (TMR_BASE + TMR_OFFSET*3)
|
|
|
|
/* Structure-based register definitions */
|
|
/* Example use:
|
|
TMR2->CTRL = 0x1234;
|
|
TMR2->CTRLbits = (struct TMR_CTRL) {
|
|
.DIR = 1,
|
|
.OUTPUT_MODE = 2,
|
|
};
|
|
TMR2->CTRLbits.PRIMARY_CNT_SOURCE = 3;
|
|
*/
|
|
|
|
struct TMR_struct {
|
|
uint16_t COMP1;
|
|
uint16_t COMP2;
|
|
uint16_t CAPT;
|
|
uint16_t LOAD;
|
|
uint16_t HOLD;
|
|
uint16_t CNTR;
|
|
union {
|
|
uint16_t CTRL;
|
|
struct TMR_CTRL {
|
|
uint16_t OUTPUT_MODE:3;
|
|
uint16_t CO_INIT:1;
|
|
uint16_t DIR:1;
|
|
uint16_t LENGTH:1;
|
|
uint16_t ONCE:1;
|
|
uint16_t SECONDARY_CNT_SOURCE:2;
|
|
uint16_t PRIMARY_CNT_SOURCE:4;
|
|
uint16_t COUNT_MODE:3;
|
|
} CTRLbits;
|
|
};
|
|
union {
|
|
uint16_t SCTRL;
|
|
struct TMR_SCTRL {
|
|
uint16_t OEN:1;
|
|
uint16_t OPS:1;
|
|
uint16_t FORCE:1;
|
|
uint16_t VAL:1;
|
|
uint16_t EEOF:1;
|
|
uint16_t MSTR:1;
|
|
uint16_t CAPTURE_MODE:2;
|
|
uint16_t INPUT:1;
|
|
uint16_t IPS:1;
|
|
uint16_t IEFIE:1;
|
|
uint16_t IEF:1;
|
|
uint16_t TOFIE:1;
|
|
uint16_t TOF:1;
|
|
uint16_t TCFIE:1;
|
|
uint16_t TCF:1;
|
|
} SCTRLbits;
|
|
};
|
|
uint16_t CMPLD1;
|
|
uint16_t CMPLD2;
|
|
union {
|
|
uint16_t CSCTRL;
|
|
struct TMR_CSCTRL {
|
|
uint16_t CL1:2;
|
|
uint16_t CL2:2;
|
|
uint16_t TCF1:1;
|
|
uint16_t TCF2:1;
|
|
uint16_t TCF1EN:1;
|
|
uint16_t TCF2EN:1;
|
|
uint16_t :5;
|
|
uint16_t FILT_EN:1;
|
|
uint16_t DBG_EN:2;
|
|
} CSCTRLbits;
|
|
};
|
|
|
|
uint16_t reserved[4];
|
|
|
|
union {
|
|
uint16_t ENBL;
|
|
struct TMR_ENBL {
|
|
union {
|
|
struct {
|
|
uint16_t ENBL:4;
|
|
};
|
|
struct {
|
|
uint16_t ENBL3:1;
|
|
uint16_t ENBL2:1;
|
|
uint16_t ENBL1:1;
|
|
uint16_t ENBL0:1;
|
|
};
|
|
};
|
|
uint16_t :12;
|
|
} ENBLbits;
|
|
};
|
|
};
|
|
|
|
static volatile struct TMR_struct * const TMR0 = (void *) (TMR0_BASE);
|
|
static volatile struct TMR_struct * const TMR1 = (void *) (TMR1_BASE);
|
|
static volatile struct TMR_struct * const TMR2 = (void *) (TMR2_BASE);
|
|
static volatile struct TMR_struct * const TMR3 = (void *) (TMR3_BASE);
|
|
|
|
/* Get timer pointer from timer number */
|
|
#define TMR_ADDR(x) ((volatile struct TMR_struct *)(((uint32_t)(x) * TMR_OFFSET) + TMR_BASE))
|
|
|
|
/* Get timer number from the timer pointer. */
|
|
#define TMR_NUM(x) (((uint32_t)(x) - TMR_BASE) / TMR_OFFSET)
|
|
|
|
/* Used to compute which enable bit to set for a particular timer, e.g.
|
|
TMR0.ENBL |= TMR_ENABLE_BIT(TMR2);
|
|
Helpful when you're using macros to define timers
|
|
*/
|
|
#define TMR_ENABLE_BIT(x) (1 << TMR_NUM(x))
|
|
|
|
#define TMR0_PIN GPIO_08
|
|
#define TMR1_PIN GPIO_09
|
|
#define TMR2_PIN GPIO_10
|
|
#define TMR3_PIN GPIO_11
|
|
|
|
/* Old timer definitions, for compatibility */
|
|
#ifndef REG_NO_COMPAT
|
|
|
|
#define TMR_REGOFF_COMP1 (0x0)
|
|
#define TMR_REGOFF_COMP2 (0x2)
|
|
#define TMR_REGOFF_CAPT (0x4)
|
|
#define TMR_REGOFF_LOAD (0x6)
|
|
#define TMR_REGOFF_HOLD (0x8)
|
|
#define TMR_REGOFF_CNTR (0xa)
|
|
#define TMR_REGOFF_CTRL (0xc)
|
|
#define TMR_REGOFF_SCTRL (0xe)
|
|
#define TMR_REGOFF_CMPLD1 (0x10)
|
|
#define TMR_REGOFF_CMPLD2 (0x12)
|
|
#define TMR_REGOFF_CSCTRL (0x14)
|
|
#define TMR_REGOFF_ENBL (0x1e)
|
|
|
|
/* one enable register to rule them all */
|
|
#define TMR_ENBL ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_ENBL))
|
|
|
|
/* Timer 0 registers */
|
|
#define TMR0_COMP1 ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_COMP1))
|
|
#define TMR0_COMP_UP TMR0_COMP1
|
|
#define TMR0_COMP2 ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_COMP2))
|
|
#define TMR0_COMP_DOWN TMR0_COMP2
|
|
#define TMR0_CAPT ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CAPT))
|
|
#define TMR0_LOAD ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_LOAD))
|
|
#define TMR0_HOLD ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_HOLD))
|
|
#define TMR0_CNTR ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CNTR))
|
|
#define TMR0_CTRL ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CTRL))
|
|
#define TMR0_SCTRL ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_SCTRL))
|
|
#define TMR0_CMPLD1 ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CMPLD1))
|
|
#define TMR0_CMPLD2 ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CMPLD2))
|
|
#define TMR0_CSCTRL ((volatile uint16_t *) (TMR0_BASE + TMR_REGOFF_CSCTRL))
|
|
|
|
/* Timer 1 registers */
|
|
#define TMR1_COMP1 ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_COMP1))
|
|
#define TMR1_COMP_UP TMR1_COMP1
|
|
#define TMR1_COMP2 ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_COMP2))
|
|
#define TMR1_COMP_DOWN TMR1_COMP2
|
|
#define TMR1_CAPT ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CAPT))
|
|
#define TMR1_LOAD ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_LOAD))
|
|
#define TMR1_HOLD ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_HOLD))
|
|
#define TMR1_CNTR ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CNTR))
|
|
#define TMR1_CTRL ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CTRL))
|
|
#define TMR1_SCTRL ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_SCTRL))
|
|
#define TMR1_CMPLD1 ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CMPLD1))
|
|
#define TMR1_CMPLD2 ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CMPLD2))
|
|
#define TMR1_CSCTRL ((volatile uint16_t *) (TMR1_BASE + TMR_REGOFF_CSCTRL))
|
|
|
|
/* Timer 2 registers */
|
|
#define TMR2_COMP1 ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_COMP1))
|
|
#define TMR2_COMP_UP TMR2_COMP1
|
|
#define TMR2_COMP2 ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_COMP2))
|
|
#define TMR2_COMP_DOWN TMR2_COMP2
|
|
#define TMR2_CAPT ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CAPT))
|
|
#define TMR2_LOAD ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_LOAD))
|
|
#define TMR2_HOLD ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_HOLD))
|
|
#define TMR2_CNTR ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CNTR))
|
|
#define TMR2_CTRL ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CTRL))
|
|
#define TMR2_SCTRL ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_SCTRL))
|
|
#define TMR2_CMPLD1 ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CMPLD1))
|
|
#define TMR2_CMPLD2 ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CMPLD2))
|
|
#define TMR2_CSCTRL ((volatile uint16_t *) (TMR2_BASE + TMR_REGOFF_CSCTRL))
|
|
|
|
/* Timer 3 registers */
|
|
#define TMR3_COMP1 ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_COMP1))
|
|
#define TMR3_COMP_UP TMR3_COMP1
|
|
#define TMR3_COMP2 ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_COMP2))
|
|
#define TMR3_COMP_DOWN TMR3_COMP2
|
|
#define TMR3_CAPT ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CAPT))
|
|
#define TMR3_LOAD ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_LOAD))
|
|
#define TMR3_HOLD ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_HOLD))
|
|
#define TMR3_CNTR ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CNTR))
|
|
#define TMR3_CTRL ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CTRL))
|
|
#define TMR3_SCTRL ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_SCTRL))
|
|
#define TMR3_CMPLD1 ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CMPLD1))
|
|
#define TMR3_CMPLD2 ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CMPLD2))
|
|
#define TMR3_CSCTRL ((volatile uint16_t *) (TMR3_BASE + TMR_REGOFF_CSCTRL))
|
|
|
|
#define TMR(num, reg) CAT2(TMR,num,_##reg)
|
|
|
|
#endif /* REG_NO_COMPAT */
|
|
|
|
/* Initialize timer. This just counts and interrupts, doesn't drive an output.
|
|
timer_num = 0, 1, 2, 3
|
|
rate = desired rate in Hz,
|
|
enable_int = whether to enable an interrupt on every cycle
|
|
Returns actual timer rate. */
|
|
uint32_t timer_setup_ex(int timer_num, uint32_t rate, int enable_int);
|
|
|
|
/* Initialize timer. This just counts and interrupts, doesn't drive an output.
|
|
timer = TMR0, TMR1, TMR2, TMR3
|
|
rate = desired rate in Hz,
|
|
enable_int = whether to enable an interrupt on every cycle
|
|
Returns actual timer rate. */
|
|
#define timer_setup(timer,rate,enable_int) timer_setup_ex(TMR_NUM(timer), rate, enable_int)
|
|
|
|
#endif
|