mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
28 lines
1.1 KiB
Plaintext
28 lines
1.1 KiB
Plaintext
See siscslow_ethernet.c for information about translation between
|
|
802.15.4 and 802.3 addresses.
|
|
Devices must have a proper EUI-64 address for this bridge to work.
|
|
If the EUI-64 address of the devices cannot be changed and they are
|
|
incompatible with the translation mechanism, you have to change the
|
|
translation rules (they are defined in mac_createSicslowpanLongAddr()
|
|
and mac_createEthernetAddr()).
|
|
|
|
Usage example:
|
|
|
|
run tapslip6 (source file are located in tools folder).
|
|
|
|
./tapslip6 -p 2001:db8:bbbb:abce::/64
|
|
|
|
where 2001:db8:bbbb:abce:: is the network address and 64 is the the
|
|
prefix length. The remaining 64 bits will be derived from the EUI-64 (two
|
|
middle bytes will be removed).
|
|
|
|
You can also simply create an edge router in one of the network nodes:
|
|
you have to enable routing and set the appropriate forwarding rules, as
|
|
shown in contiki-init-net.c. Then you have to add the corresponding
|
|
rule on your machine, for example:
|
|
route -A inet6 add 2001:db8:bbbb:abcd::/64 gw 2001:db8:bbbb:abce:
|
|
280:e102::8a.
|
|
|
|
where 2001:db8:bbbb:abce:280:e102::6c is the address of the edge
|
|
node and 2001:db8:bbbb:abcd::/64 is the lowpan address.
|