mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-17 21:09:03 +00:00
294 lines
11 KiB
C
294 lines
11 KiB
C
/*
|
|
* Copyright (c) 2015, Zolertia
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup zoul
|
|
* @{
|
|
*
|
|
* \defgroup zoul-cc1200 Zoul CC1200 arch
|
|
*
|
|
* CC1200 Zoul arch specifics
|
|
* @{
|
|
*
|
|
* \file
|
|
* CC1200 Zoul arch specifics
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki.h"
|
|
#include "contiki-net.h"
|
|
#include "dev/leds.h"
|
|
#include "reg.h"
|
|
#include "spi-arch.h"
|
|
#include "dev/ioc.h"
|
|
#include "dev/sys-ctrl.h"
|
|
#include "dev/spi.h"
|
|
#include "dev/ssi.h"
|
|
#include "dev/gpio.h"
|
|
#include <stdio.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#define CC1200_SPI_CLK_PORT_BASE GPIO_PORT_TO_BASE(SPI0_CLK_PORT)
|
|
#define CC1200_SPI_CLK_PIN_MASK GPIO_PIN_MASK(SPI0_CLK_PIN)
|
|
#define CC1200_SPI_MOSI_PORT_BASE GPIO_PORT_TO_BASE(SPI0_TX_PORT)
|
|
#define CC1200_SPI_MOSI_PIN_MASK GPIO_PIN_MASK(SPI0_TX_PIN)
|
|
#define CC1200_SPI_MISO_PORT_BASE GPIO_PORT_TO_BASE(SPI0_RX_PORT)
|
|
#define CC1200_SPI_MISO_PIN_MASK GPIO_PIN_MASK(SPI0_RX_PIN)
|
|
#define CC1200_SPI_CSN_PORT_BASE GPIO_PORT_TO_BASE(CC1200_SPI_CSN_PORT)
|
|
#define CC1200_SPI_CSN_PIN_MASK GPIO_PIN_MASK(CC1200_SPI_CSN_PIN)
|
|
#define CC1200_GDO0_PORT_BASE GPIO_PORT_TO_BASE(CC1200_GDO0_PORT)
|
|
#define CC1200_GDO0_PIN_MASK GPIO_PIN_MASK(CC1200_GDO0_PIN)
|
|
#define CC1200_GDO2_PORT_BASE GPIO_PORT_TO_BASE(CC1200_GDO2_PORT)
|
|
#define CC1200_GDO2_PIN_MASK GPIO_PIN_MASK(CC1200_GDO2_PIN)
|
|
#define CC1200_RESET_PORT_BASE GPIO_PORT_TO_BASE(CC1200_RESET_PORT)
|
|
#define CC1200_RESET_PIN_MASK GPIO_PIN_MASK(CC1200_RESET_PIN)
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifndef DEBUG_CC1200_ARCH
|
|
#define DEBUG_CC1200_ARCH 0
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
#if DEBUG_CC1200_ARCH > 0
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#define BUSYWAIT_UNTIL(cond, max_time) \
|
|
do { \
|
|
rtimer_clock_t t0; \
|
|
t0 = RTIMER_NOW(); \
|
|
while(!(cond) && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time))) {} \
|
|
if(!(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time)))) { \
|
|
printf("ARCH: Timeout exceeded in line %d!\n", __LINE__); \
|
|
} \
|
|
} while(0)
|
|
#else
|
|
#define PRINTF(...)
|
|
#define BUSYWAIT_UNTIL(cond, max_time) while(!cond)
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
extern int cc1200_rx_interrupt(void);
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_int_handler(uint8_t port, uint8_t pin)
|
|
{
|
|
/* To keep the gpio_register_callback happy */
|
|
cc1200_rx_interrupt();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_spi_select(void)
|
|
{
|
|
/* Set CSn to low (0) */
|
|
GPIO_CLR_PIN(CC1200_SPI_CSN_PORT_BASE, CC1200_SPI_CSN_PIN_MASK);
|
|
/* The MISO pin should go low before chip is fully enabled. */
|
|
BUSYWAIT_UNTIL(
|
|
GPIO_READ_PIN(CC1200_SPI_MISO_PORT_BASE, CC1200_SPI_MISO_PIN_MASK) == 0,
|
|
RTIMER_SECOND / 100);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_spi_deselect(void)
|
|
{
|
|
/* Set CSn to high (1) */
|
|
GPIO_SET_PIN(CC1200_SPI_CSN_PORT_BASE, CC1200_SPI_CSN_PIN_MASK);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc1200_arch_spi_rw_byte(uint8_t c)
|
|
{
|
|
SPI_WAITFORTx_BEFORE();
|
|
SPIX_BUF(CC1200_SPI_INSTANCE) = c;
|
|
SPIX_WAITFOREOTx(CC1200_SPI_INSTANCE);
|
|
SPIX_WAITFOREORx(CC1200_SPI_INSTANCE);
|
|
c = SPIX_BUF(CC1200_SPI_INSTANCE);
|
|
|
|
return c;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc1200_arch_spi_rw(uint8_t *inbuf, const uint8_t *write_buf, uint16_t len)
|
|
{
|
|
int i;
|
|
uint8_t c;
|
|
|
|
if((inbuf == NULL && write_buf == NULL) || len <= 0) {
|
|
return 1;
|
|
} else if(inbuf == NULL) {
|
|
for(i = 0; i < len; i++) {
|
|
SPI_WAITFORTx_BEFORE();
|
|
SPIX_BUF(CC1200_SPI_INSTANCE) = write_buf[i];
|
|
SPIX_WAITFOREOTx(CC1200_SPI_INSTANCE);
|
|
SPIX_WAITFOREORx(CC1200_SPI_INSTANCE);
|
|
c = SPIX_BUF(CC1200_SPI_INSTANCE);
|
|
/* read and discard to avoid "variable set but not used" warning */
|
|
(void)c;
|
|
}
|
|
} else if(write_buf == NULL) {
|
|
for(i = 0; i < len; i++) {
|
|
SPI_WAITFORTx_BEFORE();
|
|
SPIX_BUF(CC1200_SPI_INSTANCE) = 0;
|
|
SPIX_WAITFOREOTx(CC1200_SPI_INSTANCE);
|
|
SPIX_WAITFOREORx(CC1200_SPI_INSTANCE);
|
|
inbuf[i] = SPIX_BUF(CC1200_SPI_INSTANCE);
|
|
}
|
|
} else {
|
|
for(i = 0; i < len; i++) {
|
|
SPI_WAITFORTx_BEFORE();
|
|
SPIX_BUF(CC1200_SPI_INSTANCE) = write_buf[i];
|
|
SPIX_WAITFOREOTx(CC1200_SPI_INSTANCE);
|
|
SPIX_WAITFOREORx(CC1200_SPI_INSTANCE);
|
|
inbuf[i] = SPIX_BUF(CC1200_SPI_INSTANCE);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio0_setup_irq(int rising)
|
|
{
|
|
|
|
GPIO_SOFTWARE_CONTROL(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
GPIO_SET_INPUT(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
GPIO_DETECT_EDGE(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
GPIO_TRIGGER_SINGLE_EDGE(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
|
|
if(rising) {
|
|
GPIO_DETECT_RISING(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
} else {
|
|
GPIO_DETECT_FALLING(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
}
|
|
|
|
GPIO_ENABLE_INTERRUPT(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
ioc_set_over(CC1200_GDO0_PORT, CC1200_GDO0_PIN, IOC_OVERRIDE_PUE);
|
|
nvic_interrupt_enable(CC1200_GPIOx_VECTOR);
|
|
gpio_register_callback(cc1200_int_handler, CC1200_GDO0_PORT,
|
|
CC1200_GDO0_PIN);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio2_setup_irq(int rising)
|
|
{
|
|
|
|
GPIO_SOFTWARE_CONTROL(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
GPIO_SET_INPUT(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
GPIO_DETECT_EDGE(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
GPIO_TRIGGER_SINGLE_EDGE(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
|
|
if(rising) {
|
|
GPIO_DETECT_RISING(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
} else {
|
|
GPIO_DETECT_FALLING(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
}
|
|
|
|
GPIO_ENABLE_INTERRUPT(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
ioc_set_over(CC1200_GDO2_PORT, CC1200_GDO2_PIN, IOC_OVERRIDE_PUE);
|
|
nvic_interrupt_enable(CC1200_GPIOx_VECTOR);
|
|
gpio_register_callback(cc1200_int_handler, CC1200_GDO2_PORT,
|
|
CC1200_GDO2_PIN);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio0_enable_irq(void)
|
|
{
|
|
GPIO_ENABLE_INTERRUPT(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
ioc_set_over(CC1200_GDO0_PORT, CC1200_GDO0_PIN, IOC_OVERRIDE_PUE);
|
|
nvic_interrupt_enable(CC1200_GPIOx_VECTOR);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio0_disable_irq(void)
|
|
{
|
|
GPIO_DISABLE_INTERRUPT(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio2_enable_irq(void)
|
|
{
|
|
GPIO_ENABLE_INTERRUPT(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
ioc_set_over(CC1200_GDO2_PORT, CC1200_GDO2_PIN, IOC_OVERRIDE_PUE);
|
|
nvic_interrupt_enable(CC1200_GPIOx_VECTOR);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_gpio2_disable_irq(void)
|
|
{
|
|
GPIO_DISABLE_INTERRUPT(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc1200_arch_gpio0_read_pin(void)
|
|
{
|
|
return GPIO_READ_PIN(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc1200_arch_gpio2_read_pin(void)
|
|
{
|
|
return GPIO_READ_PIN(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc1200_arch_gpio3_read_pin(void)
|
|
{
|
|
return 0x00;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc1200_arch_init(void)
|
|
{
|
|
/* First leave RESET high */
|
|
GPIO_SOFTWARE_CONTROL(CC1200_RESET_PORT_BASE, CC1200_RESET_PIN_MASK);
|
|
GPIO_SET_OUTPUT(CC1200_RESET_PORT_BASE, CC1200_RESET_PIN_MASK);
|
|
ioc_set_over(CC1200_RESET_PORT, CC1200_RESET_PIN, IOC_OVERRIDE_OE);
|
|
GPIO_SET_PIN(CC1200_RESET_PORT_BASE, CC1200_RESET_PIN_MASK);
|
|
|
|
/* Initialize CSn, enable CSn and then wait for MISO to go low*/
|
|
spix_cs_init(CC1200_SPI_CSN_PORT, CC1200_SPI_CSN_PIN);
|
|
|
|
/* Initialize SPI */
|
|
spix_init(CC1200_SPI_INSTANCE);
|
|
|
|
/* Configure GPIOx */
|
|
GPIO_SOFTWARE_CONTROL(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
GPIO_SET_INPUT(CC1200_GDO0_PORT_BASE, CC1200_GDO0_PIN_MASK);
|
|
GPIO_SOFTWARE_CONTROL(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
GPIO_SET_INPUT(CC1200_GDO2_PORT_BASE, CC1200_GDO2_PIN_MASK);
|
|
|
|
/* Leave CSn as default */
|
|
cc1200_arch_spi_deselect();
|
|
|
|
/* Ensure MISO is high */
|
|
BUSYWAIT_UNTIL(
|
|
GPIO_READ_PIN(CC1200_SPI_MISO_PORT_BASE, CC1200_SPI_MISO_PIN_MASK),
|
|
RTIMER_SECOND / 10);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|
|
|