mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-19 03:05:14 +00:00

History

Rémy Léone 911f3aa07c SkyByteRadio was replaced by Msp802154Radio		2014-07-23 15:42:59 +02:00
..
hello-world-example.csc	SkyByteRadio was replaced by Msp802154Radio	2014-07-23 15:42:59 +02:00
hello-world.c	Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree	2012-10-26 15:54:49 +02:00
Makefile	Add hello-world README	2010-12-03 16:39:56 +00:00
README.md	Rename to md	2013-03-26 23:15:37 +01:00

README.md

Hello-world

This adds the hello-world process in hello-world.c to the platform build, which prints "Hello-world" to stdout on startup.

The entire platform is built, with uip stack, radio drivers, routing, etc. So it is not usually a simple build! The native platform is the default:

make
./hello-world.native
Starting Contiki
Hello, world

When switching between ipv4 and ipv6 builds on a platform,

make TARGET=<platform> clean

else the library for that platform will contain duplicate or unresolved modules.

For example, using a loopback interface with the minimal-net platform:

cd /examples/hello-world
make TARGET=minimal-net
./hello-world.minimal-net
Hello, world
IP Address:  10.1.1.1
Subnet Mask: 255.0.0.0
Def. Router: 10.1.1.100
^C

make TARGET=minimal-net clean
make UIP_CONF_IPV6=1 TARGET=minimal-net
./hello-world.minimal-net
Hello, world
IPV6 Address: [aaaa::206:98ff:fe00:232]
IPV6 Address: [fe80::206:98ff:fe00:232]
^C

Note to AVR Raven users: Output goes to UART1, not the LCD. To see it,

make TARGET=avr-raven hello-world.elf

Load the .elf in AVR Studio and connect a hapsim terminal to the 1284p simulation.