Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-19 03:05:14 +00:00
Code Issues Projects Releases Wiki Activity
4bf868fd99
contiki/examples/jn516x/tsch/simple-sensor-network/node
History
Theo van Daele 68b2b3dd1c Add examples for NXP JN516x using TSCH
2016-01-05 10:44:13 +01:00
..
Makefile Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
node.c Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
project-conf.h Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
README.md Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
waveform.h Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00

README.md

Node is part of Simple-Sensor-Network When node is connected to border-router (TSCH), it will wait to be addressed by a host on port 8185. When addressed, IPv6 address of host is acquired. Node will start to transmit samples of a waveform ("simulated" sensor data) to the host on port 8186 at a rate of once per 10 seconds. Type of waveform and phase depend on mac address of node in order to better distinguish the waveforms at the host side. LED is flashed every time a sample is transmitted. Nodes are tested with configuration JN516x_WITH_DONGLE=1