contiki/platform/c128/lib/pfs.S
2016-03-06 21:11:18 +01:00

436 lines
8.5 KiB
ArmAsm

;
; Copyright (c) 2010, Kajtar Zsolt <soci@c64.rulez.org>
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
; 1. Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in the
; documentation and/or other materials provided with the distribution.
; 3. Neither the name of the Institute nor the names of its contributors
; may be used to endorse or promote products derived from this software
; without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
; ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
; SUCH DAMAGE.
;
; This file is part of the Contiki operating system.
;
; Author: Kajtar Zsolt <soci@c64.rulez.org>
;
;---------------------------------------------------------------------
.define F_IDE64 0 ; support IDE64, not on C128
.constructor init_pfs
.destructor done_pfs
.importzp ptr1, ptr2, ptr3, sp
.import curunit, __filetype, popax, addysp, subysp
.export pfs_rwcommon, pfs_rwsetflags, pfs_rwcommonend
.if F_IDE64
.export ide64_rwprepare, ide64_rwfinish
.endif
.export _pfs_open, _pfs_read, _pfs_close
;---------------------------------------------------------------------
F_EOF = $80
F_NBLK = $40
F_OPEN = $20
F_MAXLEN = 80 ;max filename length
ST = $90 ;status
FN = $BB ;filename
FNL = $B7 ;filenamelength
LF = $B8 ;logical file number
SA = $B9 ;secondary address
OPEN = $FFC0
CLOSE = $FFC3
CHKIN = $FFC6
CHKOUT = $FFC9
CLRCHN = $FFCC
CHRIN = $FFCF
CHROUT = $FFD2
SETLFS = $FFBA
SETNAM = $FFBD
CLALL = $FFE7
WRITE = $DEF1
READ = $DEF4
;---------------------------------------------------------------------
.data
illchr: .byte $3A, $2A, $3F, $3D ;illegal chars
pw: .byte $2C, $50, $2C, $57 ;,p,w
cmdc: .byte 0
flags: .res 10
;---------------------------------------------------------------------
.segment "ONCE"
init_pfs:
ldy #F_MAXLEN+8
jsr subysp ;allocate
lda #0
sta FNL ;no name
ldy #15-1
jsr open2 ;open command channel
sta cmdc
rts
;---------------------------------------------------------------------
.code
error3: jmp error
_pfs_open:
sta ptr2
; Pop and store name
jsr popax
sta FN
stx FN+1 ;filename (kernal)
ldy #F_MAXLEN+8
jsr subysp ;allocate name
ldy #255
sty ptr3
sty ptr1
@L10: iny
cpy #F_MAXLEN
bcs error3 ;too long...
ldx #4 ;4+1 (comma)
@L12: cmp illchr,x
beq error3 ;illegal char?
dex
bpl @L12
cmp #$2F
bne @L11
sty ptr1 ;last slash
@L11: lda (FN),y
bne @L10
sty FNL
tay
tax
lda #$30 ;this partition
sta (sp),y
iny
inc ptr1
beq nopath
lda #$2F
@L13: sta (sp),y
iny
lda (FN,x)
inc FN
bne @L14
inc FN+1
@L14: cpy ptr1
bcc @L13
lda #$2F
sta (sp),y
iny
nopath: lda #$3A
@L16: sta (sp),y
iny
lda (FN,x)
inc FN
bne @L15
inc FN+1
@L15: ora #0
bne @L16
lsr ptr2
bcs ro ;read only
lda __filetype
sta pw+1 ;set filetype
ldx #252
@L20: lda pw-252,x
sta (sp),y ;write
iny
inx
bne @L20
ro: tya ;name length (kernal)
ldx sp
ldy sp+1
jsr SETNAM
lda #0 ;file number
tay ;secondary address
open2: sta ptr2
sty ptr2+1
next: inc ptr2 ;next file number
ldx ptr2 ;file number
cpx #11
bcs error ;no more files
lda flags-1,x
bne next ;already used
lda ptr2+1
bne nextsa
inx
stx ptr2+1
nextsa: inc ptr2+1 ;next channel
retr: lda ptr2 ;file number
ldx curunit
ldy ptr2+1 ;secondary address
jsr SETLFS
jsr OPEN ;open
bcs oerr
ldx cmdc
beq opok ;error channel open
jsr CHKIN
bcs error
jsr CHRIN
pha
jsr CHRIN
sta ptr1
@L4: jsr CHRIN
lda ST
beq @L4
jsr CLRCHN
pla
tax
lsr
cmp #$18 ;no serious error
beq opok
txa
pha
lda ptr2
jsr CLOSE ;close
pla
ldx ptr1
cmp #$37 ;no channel?
bne nnoc
cpx #$30
bne error ;not no channel
lda ptr2+1
cmp #14
bcc nextsa ;try next channel
bcs error ;give up
opok: ldx ptr2
lda #F_OPEN
sta flags-1,x
txa ;ok, return file number
ldx #0
ret: ldy #F_MAXLEN+8 ; free filename
jmp addysp
oerr: dec ptr2+1
cmp #2 ;already open,
beq next ;retry with next
error: lda #$FF
tax ;failed
bne ret
nnoc: inc ptr3
bne error ;no retry
cmp #$36
bne error ;no exists
cpx #$33
bne error
ldx cmdc
jsr CHKOUT
bcs error
lda FNL
sec
sbc #5
tax
lda #$53 ;scratch
jsr CHROUT
ldy #1
@L4: lda (FN),y
iny
jsr CHROUT
dex
bne @L4
lda #$3D
jsr CHROUT
iny
lda (FN),y
jsr CHROUT
lda #$0d
jsr CHROUT
jsr CLRCHN
jmp retr
.proc _pfs_read
jsr pfs_rwcommon ; pop params, check handle
beq error2 ; not open
bmi eof
.if F_IDE64
asl
bmi nblk ; no block operation
jsr CHKIN
bcs error2
; check support
jsr ide64_rwprepare
bcs norm
; read
jsr READ
bcs nosup
jmp ide64_rwfinish
nosup: lda #F_NBLK
jsr pfs_rwsetflags
.endif
; Valid lfn. Make it the input file
nblk: jsr CHKIN
bcs error2
; Decrement the count
norm: ldy #0
@L3: inc ptr1
bne @L0
inc ptr1+1
beq done ; branch always
; Read the next byte
@L0: jsr CHRIN
tax ; save the input byte
lda ST ; read the IEEE status
cmp #1 ; save it
and #%10111111 ; check anything but the EOI bit
bne error5 ; assume device not present
; Store the byte just read
txa
sta (ptr2),y
inc ptr2
bne @L1
inc ptr2+1 ; *buf++ = A;
; Get the status again and check the EOI bit
@L1: bcc @L3 ; loop if no end of file
; Set the EOI flag and bail out
lda #F_EOF
jsr pfs_rwsetflags
; Read done, close the input channel
done: jsr CLRCHN ; clrchn
; Return the number of chars read
eof: jmp pfs_rwcommonend
.endproc
; Error entry, file is not open
done_pfs:
ldx #10
@L2: ldy flags-1,x ; file open?
beq @L1
txa
jsr _pfs_close
@L1: dex
bne @L2
rts
error5: jsr CLRCHN ; clrchn
error2: ldx #255
txa
rts
_pfs_close:
pha
jsr CLOSE ;close
pla
tax
lda #0
sta flags-1,x
rts
.proc pfs_rwcommon
eor #$FF
sta ptr1
txa
eor #$FF
sta ptr1+1 ; remember -count-1
jsr popax ; get buf
sta ptr2
stx ptr2+1
sta ptr3
stx ptr3+1 ; for length
jsr popax ; get the handle
sta LF
lda #0
beq pfs_rwsetflags
.endproc
.if F_IDE64
.proc ide64_rwprepare
sec
lda ptr1+1
eor #255
beq small ; too small, not worth it
tay
lda ptr1 ; setup registers
eor #255
tax
lda $031B
eor #$DE
bne noide ; open vector set?
lda $DE60
eor #$49
bne noide ; check identification
lda $DE61
eor #$44
bne noide
lda $DE62
eor #$45
bne noide
clc
lda #ptr2
small: rts
noide: lda #F_NBLK
bne pfs_rwsetflags
.endproc
.endif
.proc pfs_rwsetflags
ldx LF
ora flags-1,x
sta flags-1,x
rts
.endproc
.if F_IDE64
.proc ide64_rwfinish
txa
pha
tya
pha
jsr CLRCHN
pla
tax
pla
rts
.endproc
.endif
.proc pfs_rwcommonend
lda ptr2
sec
sbc ptr3
pha
lda ptr2+1
sbc ptr3+1
tax
pla
rts
.endproc