adamdunkels 4928e43880 netperf: a new small shell command that measures the communication ... performance between two local (single-hop) nodes. It sends packets over both broadcast and unicast, both in one direction and in both, as well as tested the stream mode of the underlying MAC protocol.		2009-11-03 22:52:39 +00:00
..
gui-shell.c	Include wget shell command in "standard" shell environments.	2008-11-10 22:10:32 +00:00
Makefile.shell	netperf: a new small shell command that measures the communication	2009-11-03 22:52:39 +00:00
shell-blink.c
shell-blink.h
shell-checkpoint.c	added log output + minor fix	2009-10-27 10:46:24 +00:00
shell-checkpoint.h	added experimental checkpointing functionality:	2009-02-04 17:49:15 +00:00
shell-coffee.c	adjusted shell for the generic remove command.	2008-11-24 15:18:27 +00:00
shell-coffee.h	Added a separate file for CFS Coffee-specific commands	2008-07-03 17:56:17 +00:00
shell-download.c	fixed compiler warnings (as suggested by Niclas Finne)	2009-04-20 13:18:07 +00:00
shell-download.h	two new shell commands: download and sendcmd	2009-04-16 14:33:47 +00:00
shell-dsc.c
shell-dsc.h
shell-exec.c	bugfix: cfs_open must get aquire permissions	2009-03-26 12:22:52 +00:00
shell-exec.h
shell-file.c	the third read parameter must be checked for existence.	2009-05-12 14:22:58 +00:00
shell-file.h
shell-httpd.c	Added httpd command that sets up a local web server, reading files from the CFS file system	2008-11-09 12:37:26 +00:00
shell-httpd.h	Added httpd command that sets up a local web server, reading files from the CFS file system	2008-11-09 12:37:26 +00:00
shell-irc.c	Added an irc shell command that runs an IRC client from the shell.	2008-11-28 00:16:15 +00:00
shell-irc.h	Added an irc shell command that runs an IRC client from the shell.	2008-11-28 00:16:15 +00:00
shell-netfile.c	switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)	2009-02-27 14:28:02 +00:00
shell-netfile.h
shell-netperf.c	netperf: a new small shell command that measures the communication	2009-11-03 22:52:39 +00:00
shell-netperf.h	netperf: a new small shell command that measures the communication	2009-11-03 22:52:39 +00:00
shell-netstat.c	Added a 'netstat' command that (currently) shows active TCP connections	2009-05-10 21:02:24 +00:00
shell-netstat.h	Added a 'netstat' command that (currently) shows active TCP connections	2009-05-10 21:02:24 +00:00
shell-ping.c	Fixed IPv6 compilation problems	2009-03-07 09:32:41 +00:00
shell-ping.h	Added three commands for IP interaction in the shell: ping (sends ICMP ping messages), tcpsend (sets up TCP connections for sending and receiving data), and udpsend (sends and receives UDP packets)	2009-03-06 00:29:33 +00:00
shell-power.c	Refactored the power commands out from the sky-specific shell commands into its own module. Also added compower idle consumption in the energy and power reports.	2009-03-05 21:12:02 +00:00
shell-power.h	Refactored the power commands out from the sky-specific shell commands into its own module. Also added compower idle consumption in the energy and power reports.	2009-03-05 21:12:02 +00:00
shell-profile.c
shell-profile.h
shell-ps.c
shell-ps.h
shell-reboot.c
shell-reboot.h
shell-rime-debug.c	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 21:58:20 +00:00
shell-rime-debug.h	Separated the 'debug' commands (unicast and broadcast) from shell-rime into a separate shell-rime-debug	2008-07-04 08:23:00 +00:00
shell-rime-neighbors.c	Added missing string.h include, for memset()	2009-10-18 11:42:06 +00:00
shell-rime-neighbors.h	Broke out the 'neighbor' command functionality from the shell-rime.c file; reimplemented it to use the announcemnet primitive instead	2009-05-10 21:04:06 +00:00
shell-rime-netcmd.c	Avoid alignment problems by copying the crc from the header field into a local variable	2009-04-06 23:29:31 +00:00
shell-rime-netcmd.h
shell-rime-ping.c	Fixed alignment problem on the MSP430, where the ping message may be misaligned	2009-03-31 17:39:36 +00:00
shell-rime-ping.h
shell-rime-sendcmd.c	two new shell commands: download and sendcmd	2009-04-16 14:33:47 +00:00
shell-rime-sendcmd.h	two new shell commands: download and sendcmd	2009-04-16 14:33:47 +00:00
shell-rime-sniff.c	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 21:58:20 +00:00
shell-rime-sniff.h
shell-rime-unicast.c	Fixed compiler warnings	2009-09-09 21:06:51 +00:00
shell-rime-unicast.h	Added two commands: unicast-send and unicast-recv that can be used to send unicast data	2009-05-10 21:04:40 +00:00
shell-rime.c	Broke out the 'neighbor' command functionality from the shell-rime.c file; reimplemented it to use the announcemnet primitive instead	2009-05-10 21:04:06 +00:00
shell-rime.h	netperf: a new small shell command that measures the communication	2009-11-03 22:52:39 +00:00
shell-rsh.c	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 21:58:20 +00:00
shell-rsh.h
shell-run.c	Added a 'run' shell command similiar to the 'exec' command but using the high-level LOADER_LOAD() interface instead of the ELF-loader specific interface.	2008-02-08 12:49:54 +00:00
shell-run.h	Added a 'run' shell command similiar to the 'exec' command but using the high-level LOADER_LOAD() interface instead of the ELF-loader specific interface.	2008-02-08 12:49:54 +00:00
shell-sendtest.c	Printout power data as well	2009-11-03 10:04:23 +00:00
shell-sendtest.h
shell-sensortweet.c	Fixed compiler warnings	2009-09-09 21:06:51 +00:00
shell-sensortweet.h	A shell command for posting a #sensortweet message to Twitter	2009-05-11 17:11:37 +00:00
shell-sky.c	Refactored the power commands out from the sky-specific shell commands into its own module. Also added compower idle consumption in the energy and power reports.	2009-03-05 21:12:02 +00:00
shell-sky.h
shell-tcpsend.c	Fix types to make cc65 happy	2009-03-17 21:49:44 +00:00
shell-tcpsend.h	Added three commands for IP interaction in the shell: ping (sends ICMP ping messages), tcpsend (sets up TCP connections for sending and receiving data), and udpsend (sends and receives UDP packets)	2009-03-06 00:29:33 +00:00
shell-text.c	Added three commands for IP interaction in the shell: ping (sends ICMP ping messages), tcpsend (sets up TCP connections for sending and receiving data), and udpsend (sends and receives UDP packets)	2009-03-06 00:29:33 +00:00
shell-text.h
shell-time.c	Reverted the recent change from random_rand() to rand(). It turned out that	2009-02-11 11:08:53 +00:00
shell-time.h
shell-tweet.c	A shell command for posting arbitrary messages to Twitter	2009-05-11 17:10:55 +00:00
shell-tweet.h	A shell command for posting arbitrary messages to Twitter	2009-05-11 17:10:55 +00:00
shell-udpsend.c	Fixed compilation problems, added new commands to shell.h	2009-03-06 07:23:08 +00:00
shell-udpsend.h	Added three commands for IP interaction in the shell: ping (sends ICMP ping messages), tcpsend (sets up TCP connections for sending and receiving data), and udpsend (sends and receives UDP packets)	2009-03-06 00:29:33 +00:00
shell-vars.c
shell-vars.h
shell-wget.c	Added wget command for downloading files over HTTP	2008-11-09 12:36:23 +00:00
shell-wget.h	Added wget command for downloading files over HTTP	2008-11-09 12:36:23 +00:00
shell.c	Added documentation for the shell functions	2009-03-02 20:44:15 +00:00
shell.h	netperf: a new small shell command that measures the communication	2009-11-03 22:52:39 +00:00