mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-11 06:54:32 +00:00
This patch extends the protection domain framework with an additional plugin to use Task-State Segment (TSS) structures to offload much of the work of switching protection domains to the CPU. This can save space compared to paging, since paging requires two 4KiB page tables and one 32-byte page table plus one whole-system TSS and an additional 32-byte data structure for each protection domain, whereas the approach implemented by this patch just requires a 128-byte data structure for each protection domain. Only a small number of protection domains will typically be used, so n * 128 < 8328 + (n * 32). For additional information, please refer to cpu/x86/mm/README.md. GCC 6 is introducing named address spaces for the FS and GS segments [1]. LLVM Clang also provides address spaces for the FS and GS segments [2]. This patch also adds support to the multi-segment X86 memory management subsystem for using these features instead of inline assembly blocks, which enables type checking to detect some address space mismatches. [1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html [2] http://llvm.org/releases/3.3/tools/clang/docs/LanguageExtensions.html#target-specific-extensions
125 lines
4.3 KiB
C
125 lines
4.3 KiB
C
/*
|
|
* Copyright (C) 2015, Intel Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef CPU_X86_DRIVERS_LEGACY_PC_PCI_H_
|
|
#define CPU_X86_DRIVERS_LEGACY_PC_PCI_H_
|
|
|
|
#include <stdint.h>
|
|
#include "helpers.h"
|
|
#include <stdlib.h>
|
|
#include "prot-domains.h"
|
|
|
|
/** PCI configuration register identifier for Base Address Registers */
|
|
#define PCI_CONFIG_REG_BAR0 0x10
|
|
#define PCI_CONFIG_REG_BAR1 0x14
|
|
|
|
/** PCI Interrupt Routing is mapped using Interrupt Queue Agents */
|
|
typedef enum {
|
|
IRQAGENT0,
|
|
IRQAGENT1,
|
|
IRQAGENT2,
|
|
IRQAGENT3
|
|
} IRQAGENT;
|
|
|
|
/** PCI Interupt Pins */
|
|
typedef enum {
|
|
INTA,
|
|
INTB,
|
|
INTC,
|
|
INTD
|
|
} INTR_PIN;
|
|
|
|
/**
|
|
* PCI based interrupts PIRQ[A:H] are then available for consumption by either
|
|
* the 8259 PICs or the IO-APIC.
|
|
*/
|
|
typedef enum {
|
|
PIRQA,
|
|
PIRQB,
|
|
PIRQC,
|
|
PIRQD,
|
|
PIRQE,
|
|
PIRQF,
|
|
PIRQG,
|
|
PIRQH,
|
|
} PIRQ;
|
|
|
|
/** PCI command register bit to enable bus mastering */
|
|
#define PCI_CMD_2_BUS_MST_EN BIT(2)
|
|
/** PCI command register bit to enable memory space */
|
|
#define PCI_CMD_1_MEM_SPACE_EN BIT(1)
|
|
|
|
/**
|
|
* PCI configuration address
|
|
*
|
|
* Refer to Intel Quark SoC X1000 Datasheet, Section 5.5 for more details on
|
|
* PCI configuration register access.
|
|
*/
|
|
typedef union pci_config_addr {
|
|
struct {
|
|
/** Register/offset number. Least-significant two bits should be zero. */
|
|
uint32_t reg_off : 8;
|
|
uint32_t func : 3; /**< Function number */
|
|
uint32_t dev : 5; /**< Device number */
|
|
uint32_t bus : 8; /**< Bus number */
|
|
uint32_t : 7;
|
|
/** Must be set to perform PCI configuration access. */
|
|
uint32_t en_mapping : 1;
|
|
};
|
|
uint32_t raw;
|
|
} pci_config_addr_t;
|
|
|
|
uint32_t pci_config_read(pci_config_addr_t addr);
|
|
void pci_config_write(pci_config_addr_t addr, uint32_t data);
|
|
void pci_command_enable(pci_config_addr_t addr, uint32_t flags);
|
|
|
|
typedef dom_client_data_t pci_driver_t;
|
|
|
|
void pci_init(pci_driver_t ATTR_KERN_ADDR_SPACE *c_this,
|
|
pci_config_addr_t pci_addr,
|
|
size_t mmio_sz,
|
|
uintptr_t meta,
|
|
size_t meta_sz);
|
|
void pci_irq_agent_set_pirq(IRQAGENT agent, INTR_PIN pin, PIRQ pirq);
|
|
void pci_pirq_set_irq(PIRQ pirq, uint8_t irq, uint8_t route_to_legacy);
|
|
void pci_root_complex_init(void);
|
|
void pci_root_complex_lock(void);
|
|
|
|
#define PCI_MMIO_READL(c_this, dest, reg_addr) \
|
|
MMIO_READL(dest, \
|
|
*((volatile uint32_t ATTR_MMIO_ADDR_SPACE *) \
|
|
(((uintptr_t)PROT_DOMAINS_MMIO(c_this)) + (reg_addr))))
|
|
#define PCI_MMIO_WRITEL(c_this, reg_addr, src) \
|
|
MMIO_WRITEL(*((volatile uint32_t ATTR_MMIO_ADDR_SPACE *) \
|
|
(((uintptr_t)PROT_DOMAINS_MMIO(c_this)) + (reg_addr))), \
|
|
src)
|
|
|
|
#endif /* CPU_X86_DRIVERS_LEGACY_PC_PCI_H_ */
|