contiki/cpu/arm/openocd/target/stm32F10xxx.cfg

50 lines
1.1 KiB
INI

# STM32 Cortex M3
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32F10xxx
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0xffffffff
}
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
jtag_nsrst_delay 1
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# The target
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant cortex_m3
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0
if { [info exists BSTAPID ] } {
set _BSTAPID $BSTAPID
} else {
# force an error till we get a good number
set _BSTAPID 0xffffffff
}
#jtag scan chain
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0xf -expected-id $_BSTAPID
flash bank stm32x 0 0 0 0 0