Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-12-24 07:29:42 +00:00
Code Issues Projects Releases Wiki Activity
5c232e7263
contiki/platform/mb851/dev/mems.c
salvopitru ec5e3ce0d7 New Contiki port to STM32W108.
2010-10-25 09:03:38 +00:00

369 lines
14 KiB
C
Raw Blame History

/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : hal_led.c
* Author : MCD Application Team
* Version : V1.0
* Date : September 2009
* Description : Driver for leds management on STM32W108 MB851 board
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Includes ------------------------------------------------------------------*/
#include PLATFORM_HEADER
#include "mems.h"
#include "timer.h"
/* Private define -- ---------------------------------------------------------*/
#define TIMEOUT 20000
#define SUCCESS 1
#define FAIL 0
#define SEND_BYTE(data) do{ SC2_DATA=(data); SC2_TWICTRL1 |= SC_TWISEND; }while(0)
#define WAIT_CMD_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWICMDFIN)!=SC_TWICMDFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
#define WAIT_TX_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWITXFIN)!=SC_TWITXFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
#define WAIT_RX_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWIRXFIN)!=SC_TWIRXFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
/* Private variables ---------------------------------------------------------*/
static boolean fullscale_state;
/* Private functions ---------------------------------------------------------*/
static int8u I2C_MEMS_Init (void);
//extern void halInternalResetWatchDog(void);
static int8u I2C_Send_Frame (int8u DeviceAddress, int8u *pBuffer, int8u NoOfBytes);
int8u i2c_write_reg (int8u slave_addr, int8u reg_addr, int8u reg_value);
//static int8u I2C_MEMS_Read (t_mems_data *mems_data);
/* Functions -----------------------------------------------------------------*/
/*******************************************************************************
* Function Name : Mems_Init
* Description : It inits mems
* Input : None
* Output : status
* Return : None
*******************************************************************************/
int8u Mems_Init(void)
{
int8u ret = 0;
// GPIO assignments
// PA1: SC2SDA (Serial Data)
// PA2: SC2SCL (Serial Clock)
//-----SC2 I2C Master GPIO configuration
TIM2_CCER &= 0xFFFFEEEE;
SC2_MODE = SC2_MODE_I2C;
GPIO_PACFGL &= 0xFFFFF00F;
GPIO_PACFGL |= 0x00000DD0;
SC2_RATELIN = 14; // generates standard 100kbps or 400kbps
SC2_RATEEXP = 1; // 3 yields 100kbps; 1 yields 400kbps
SC2_TWICTRL1 = 0; // start from a clean state
SC2_TWICTRL2 = 0; // start from a clean state
ret = I2C_MEMS_Init();
fullscale_state = MEMS_LOW_RANGE;
//Add later if really needed
#ifdef ST_DBG
if (!ret)
I2C_DeInit(MEMS_I2C);
#endif
return ret;
}/* end Mems_Init */
/*******************************************************************************
* Function Name : Mems_GetValue
* Description : It returns the 3 mems acceleration values related to x,y,z
* axes in mems_data
* Input : mems_data
* Output : status
* Return : None
*******************************************************************************/
//int8u Mems_GetValue(t_mems_data *mems_data)
//{
// int8u i;
// i = I2C_MEMS_Read(mems_data);
// return i;
//}
/* Private Functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : I2C_Send_Frame
* Description : It sends I2C frame
* Input : DeviceAddress is the destination device address
* pBUffer is the buffer data
* NoOfBytes is the number of bytes
* Output : None
* Return : 1 if the frame has been successfully sent, 0 otherwise.
*******************************************************************************/
static int8u I2C_Send_Frame (int8u DeviceAddress, int8u *pBuffer, int8u NoOfBytes)
{
int8u i, data;
SC2_TWICTRL1 |= SC_TWISTART; // send start
WAIT_CMD_FIN();
SEND_BYTE(DeviceAddress); // send the address low byte
WAIT_TX_FIN();
// loop sending the data
for (i=0; i<NoOfBytes; i++) {
halInternalResetWatchDog();
data = *(pBuffer+i);
SEND_BYTE(data);
WAIT_TX_FIN();
}
SC2_TWICTRL1 |= SC_TWISTOP;
WAIT_CMD_FIN();
return SUCCESS;
}/* end I2C_Send_Frame() */
/*******************************************************************************
* Function Name : I2C_Receive_Frame
* Description : It receives an I2C frame and stores it in pBUffer parameter
* Input : slave_addr is the slave address
* reg_addr is the register address
* NoOfBytes is the numenr of bytes to read starting from reg_addr
* Output : I2C frame in pBUffer
* Return : 1 if the frame has been successfully received, 0 otherwise.
*******************************************************************************/
static int8u I2C_Receive_Frame (int8u slave_addr, int8u reg_addr, int8u *pBuffer, int8u NoOfBytes)
{
int8u i, addr = reg_addr;
if (NoOfBytes > 1)
addr += REPETIR;
SC2_TWICTRL1 |= SC_TWISTART; // send start
WAIT_CMD_FIN();
SEND_BYTE(slave_addr | 0x00); // send the address low byte
WAIT_TX_FIN();
SEND_BYTE(addr);
WAIT_TX_FIN();
SC2_TWICTRL1 |= SC_TWISTART; // send start
WAIT_CMD_FIN();
SEND_BYTE(slave_addr | 0x01); // send the address low byte
WAIT_TX_FIN();
// loop receiving the data
for (i=0;i<NoOfBytes;i++){
halInternalResetWatchDog();
if (i < (NoOfBytes - 1))
SC2_TWICTRL2 |= SC_TWIACK; // ack on receipt of data
else
SC2_TWICTRL2 &= ~SC_TWIACK; // don't ack if last one
SC2_TWICTRL1 |= SC_TWIRECV; // set to receive
WAIT_RX_FIN();
*(pBuffer+i) = SC2_DATA; // receive data
}
SC2_TWICTRL1 |= SC_TWISTOP; // send STOP
WAIT_CMD_FIN();
return SUCCESS;
}/* end I2C_Receive_Frame() */
/*******************************************************************************
* Function Name : i2c_write_reg
* Description : It writes a register on the I2C target
* Input : slave addr is the I2C target device
* reg_addr is the address of the register to be written
* reg_value is the value of the register to be written
* Output : None
* Return : 1 if the register has been successfully written, 0 otherwise.
*******************************************************************************/
int8u i2c_write_reg (int8u slave_addr, int8u reg_addr, int8u reg_value)
{
int8u i2c_buffer[2];
i2c_buffer[0] = reg_addr;
i2c_buffer[1] = reg_value;
return I2C_Send_Frame (slave_addr, i2c_buffer, 2);
}/* end i2c_write_reg() */
/*******************************************************************************
* Function Name : i2c_read_reg
* Description : It reads a register on the I2C target
* Input : slave addr is the I2C target device
* reg_addr is the address of the register to be read
* pBuffer is the storage destination for the read data
* NoOfBytes is the amount of data to read
* Output : I2C frame
* Return : 1 if the register has been successfully read, 0 otherwise.
*******************************************************************************/
int8u i2c_read_reg (int8u slave_addr, int8u reg_addr, int8u *pBuffer, int8u NoOfBytes)
{
return I2C_Receive_Frame (slave_addr, reg_addr, pBuffer, NoOfBytes);
}/* end i2c_read_reg() */
/*******************************************************************************
* Function Name : I2C_MEMS_Init
* Description : It performs basic MEMS register writes for initialization
* purposes
* Input : None
* Output : None
* Return : 1 if the device has been successfully initialized, 0 otherwise.
*******************************************************************************/
static int8u I2C_MEMS_Init (void)
{
int8u i = 0;
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, STATUS_REG, 0x00); //no flag
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, FF_WU_CFG, 0x00); // all off
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, DD_CFG, 0x00); // all off
//i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, (1<<4) | (1<<1) | (1 << 0));
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, 0x00);
//i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7);
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
if (i != 5)
return 0;
return 1;
}/* end I2C_MEMS_Init() */
/*******************************************************************************
* Function Name : I2C_MEMS_On
* Description : It turn on the device.
* Input : None
* Output : None
* Return : 1 if the device has been successfully set to normal mode, 0 otherwise.
*******************************************************************************/
int8u MEMS_On (void)
{
return i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7);
}
/*******************************************************************************
* Function Name : I2C_MEMS_Off
* Description : It turn off the device.
* Input : None
* Output : None
* Return : 1 if the device has been successfully set to power-down mode, 0 otherwise.
*******************************************************************************/
int8u MEMS_Off (void)
{
return i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
}
/*******************************************************************************
* Function Name : I2C_MEMS_SetFullScale
* Description : It sets the full-scale range of the device.
* Input : range HIGH for high scale selection, LOW for low range.
* Output : None
* Return : 1 if the device has been successfully set to full scale mode, 0 otherwise.
*******************************************************************************/
int8u MEMS_SetFullScale (boolean range)
{
int8u i2c_buffer;
if(!i2c_read_reg(kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, &i2c_buffer, 1))
return 0;
if(range==MEMS_HIGH_RANGE){
i2c_buffer |= 0x20;
}
else {
i2c_buffer &= ~0x20;
}
if(!i2c_write_reg(kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, i2c_buffer))
return 0;
fullscale_state = range;
return 1;
}
/*******************************************************************************
* Function Name : I2C_MEMS_GetFullScale
* Description : It get the full-scale range of the device.
* Input : None
* Output : None
* Return : range HIGH for high scale selection, LOW for low range.
*******************************************************************************/
boolean MEMS_GetFullScale (void)
{
return fullscale_state;
}
/*******************************************************************************
* Function Name : I2C_MEMS_Read
* Description : It reads 3 axes acceleration data from mems
* Input : None
* Output : mems_data
* Return : 1 if acceleration data has been successfully read, 0 otherwise
*******************************************************************************/
//static int8u I2C_MEMS_Read (t_mems_data *mems_data)
//{
// int8u i, i2c_buffer[8];
//
// i = i2c_read_reg (kLIS3L02DQ_SLAVE_ADDR, OUTX_L, i2c_buffer, 8);
//
// mems_data->outx_h = i2c_buffer[0];
// mems_data->outx_l = i2c_buffer[1];
// mems_data->outy_h = i2c_buffer[2];
// mems_data->outy_l = i2c_buffer[3];
// mems_data->outz_h = i2c_buffer[4];
// mems_data->outz_l = i2c_buffer[5];
//
// return i;
//}/* end I2C_MEMS_Read() */
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink