mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-19 03:05:14 +00:00
51b73127e9
* Simple HTTP webservice with support for both receiving and sending HTTP requests. * json-ws example that optionally push sensor data to COSM over IPv6.
352 lines
10 KiB
Plaintext
352 lines
10 KiB
Plaintext
#-----------------------------------------------------------------------------
|
|
# $Id: gogoc.conf.in,v 1.1 2009/11/20 16:53:12 jasminko Exp $
|
|
#-----------------------------------------------------------------------------
|
|
|
|
########################## READ ME! ################################
|
|
#
|
|
# Welcome to the gogoCLIENT configuration file.
|
|
# In order to use the client, you need to modify the 'userid', 'passwd' and
|
|
# 'server' parameters below depending on which of these situations applies:
|
|
#
|
|
# 1. If you created a Freenet6 account, enter your userid and password below.
|
|
# Change the server name to "broker.freenet6.net" and auth_method to 'any'.
|
|
# 2. If you would like to use Freenet6 without creating an account,
|
|
# do not make any modifications and close this file.
|
|
# 3. If this software was provided by your ISP, enter the userid, password and
|
|
# server name provided by your ISP below.
|
|
#
|
|
|
|
|
|
########################## BASIC CONFIGURATION ################################
|
|
|
|
#
|
|
# User Identification and Password:
|
|
# Specify your user name and password as provided by your ISP or Freenet6.
|
|
# If you plan to connect anonymously, leave these values empty.
|
|
# NOTE: Change auth_method option if you are using a username/password.
|
|
#
|
|
# userid=<your_userid>
|
|
# passwd=<your_password>
|
|
#
|
|
userid=<change to your userid>
|
|
passwd=<change to your password>
|
|
|
|
#
|
|
# gogoSERVER:
|
|
# Specify a gogoSERVER name or IP address (provided by your ISP or
|
|
# Freenet6). An optional port number can be added; the default port number
|
|
# is 3653.
|
|
#
|
|
# Examples:
|
|
# server=hostname # FQDN
|
|
# server=A.B.C.D # IPv4 address
|
|
# server=[X:X::X:X] # IPv6 address
|
|
# server=hostname:port_number
|
|
# server=A.B.C.D:port_number
|
|
# server=[X:X::X:X]:port_number
|
|
#
|
|
# Freenet6 account holders should enter authenticated.freenet6.net,
|
|
# otherwise use anonymous.freenet6.net.
|
|
# Your ISP may provide you with a different server name.
|
|
#
|
|
#server=anonymous.freenet6.net
|
|
#server=authenticated.freenet6.net
|
|
server=amsterdam.freenet6.net
|
|
|
|
#
|
|
# Authentication Method:
|
|
#
|
|
# auth_method=<{anonymous}|{any|passdss-3des-1|digest-md5|plain}>
|
|
#
|
|
# anonymous: Sends no username or password
|
|
#
|
|
# any: The most secure method will be used.
|
|
# passdss-3des-1: The password is sent encrypted.
|
|
# digest-md5: The password is sent encrypted.
|
|
# plain: Both username and password are sent as plain text.
|
|
#
|
|
# Recommended values:
|
|
# - any: If you are authenticating a username / password.
|
|
# - anonymous: If you are connecting anonymously.
|
|
#
|
|
#auth_method=anonymous
|
|
auth_method=any
|
|
|
|
|
|
########################## ROUTING CONFIGURATION ##############################
|
|
# Use these parameters when you wish the client to act as a router and provide
|
|
# IPv6 connectivity to IPv6-capable devices on your network.
|
|
|
|
#
|
|
# Local Host Type:
|
|
# Change this value to 'router' to enable IPv6 advertisements.
|
|
#
|
|
# host_type=<host|router>
|
|
#
|
|
host_type=router
|
|
#host
|
|
|
|
#
|
|
# Prefix Length:
|
|
# Length of the requested prefix. Valid values range between 0 and 64 when
|
|
# using V6*V4 tunnel modes, and between 0 and 32 when using V4V6 tunnel mode.
|
|
#
|
|
# prefixlen=<integer>
|
|
#
|
|
prefixlen=64
|
|
|
|
#
|
|
# Advertisement Interface Prefix:
|
|
# Name of the interface that will be configured to send router advertisements.
|
|
# This is an interface index on Windows (ex: 4) and a name on Linux
|
|
# and BSD (ex: eth1 or fxp1).
|
|
#
|
|
# if_prefix=<interface name>
|
|
#
|
|
if_prefix=tun0
|
|
|
|
#
|
|
# DNS Server:
|
|
# A DNS server list to which the reverse prefix will be delegated. Servers
|
|
# are separated by the colon(:) delimiter.
|
|
#
|
|
# Example: dns_server=ns1.domain:ns2.domain:ns3.domain
|
|
#
|
|
dns_server=
|
|
|
|
|
|
######################### ADVANCED CONFIGURATION ##############################
|
|
|
|
#
|
|
# gogoCLIENT Installation Directory:
|
|
# Directory where the gogoCLIENT will be installed. This value has been
|
|
# set during installation.
|
|
#
|
|
gogoc_dir=
|
|
|
|
#
|
|
# Auto-Retry Connect, Retry Delay and Max Retry Delay:
|
|
# When auto_retry_connect=yes, the gogoCLIENT will attempt to reconnect
|
|
# after a disconnection occurred. The time to wait is 'retry_delay' and that
|
|
# delay is doubled at every 3 failed consecutive reconnection attempt.
|
|
# However, the wait delay will never exceed retry_delay_max.
|
|
#
|
|
#
|
|
# auto_retry_connect=<yes|no>
|
|
# retry_delay=<integer: 0..3600>
|
|
# retry_delay_max=<integer: 0..3600>
|
|
#
|
|
# Recommended values: "yes", 30, 300
|
|
#
|
|
auto_retry_connect=yes
|
|
retry_delay=30
|
|
retry_delay_max=300
|
|
|
|
#
|
|
# Keepalive Feature and Message Interval:
|
|
# Indicates if and how often the client will send data to keep the tunnel
|
|
# active.
|
|
#
|
|
# keepalive=<yes|no>
|
|
# keepalive_interval=<integer>
|
|
#
|
|
# Recommended values: "yes" and 30
|
|
#
|
|
keepalive=yes
|
|
keepalive_interval=30
|
|
|
|
#
|
|
# Tunnel Encapsulation Mode:
|
|
# v6v4: IPv6-in-IPv4 tunnel.
|
|
# v6udpv4: IPv6-in-UDP-in-IPv4 tunnel (for clients behind a NAT).
|
|
# v6anyv4: Lets the broker choose the best mode for IPv6 tunnel.
|
|
# v4v6: IPv4-in-IPv6 tunnel.
|
|
#
|
|
# Recommended value: v6anyv4
|
|
#
|
|
tunnel_mode=v6anyv4
|
|
|
|
#
|
|
# Tunnel Interface Name:
|
|
# The interface name assigned to the tunnel. This value is O/S dependent.
|
|
#
|
|
# if_tunnel_v6v4 is the tunnel interface name for v6v4 encapsulation mode
|
|
# if_tunnel_v6udpv4 is the tunnel interface name for v6udpv4 encapsulate mode
|
|
# if_tunnel_v4v6 is the tunnel interface name for v4v6 encapsulation mode
|
|
#
|
|
# Default values are set during installation.
|
|
#
|
|
if_tunnel_v6v4=sit1
|
|
if_tunnel_v6udpv4=sit
|
|
if_tunnel_v4v6=sit0
|
|
|
|
#
|
|
# Local IP Address of the Client:
|
|
# Allows you to set a specific address as the local tunnel endpoint.
|
|
#
|
|
# client_v4=<auto|A.B.C.D (valid ipv4 address)>
|
|
# client_v6=<auto|X:X::X:X (valid ipv6 address)>
|
|
# auto: The gogoCLIENT will find the local IP address endpoint.
|
|
#
|
|
# Recommended value: auto
|
|
#
|
|
client_v4=auto
|
|
client_v6=auto
|
|
|
|
#
|
|
# Script Name:
|
|
# File name of the script to run to install the tunnel interface. The
|
|
# scripts are located in the template directory under the client
|
|
# installation directory.
|
|
#
|
|
# template=<checktunnel|freebsd|netbsd|openbsd|linux|windows|darwin|cisco|solaris>
|
|
#
|
|
# Default value is set during installation.
|
|
#
|
|
template=linux
|
|
|
|
#
|
|
# Proxy client:
|
|
# Indicates that this client will request a tunnel for another endpoint,
|
|
# such as a Cisco router.
|
|
#
|
|
# proxy_client=<yes|no>
|
|
#
|
|
# NOTE: NAT traversal is not possible in proxy mode.
|
|
#
|
|
proxy_client=no
|
|
|
|
|
|
############################ BROKER REDIRECTION ###############################
|
|
|
|
#
|
|
# Broker List File Name:
|
|
# The 'broker_list' directive specifies the filename where the broker
|
|
# list received during broker redirection will be saved.
|
|
#
|
|
# broker_list=<file_name>
|
|
#
|
|
broker_list=/var/lib/gogoc/tsp-broker-list.txt
|
|
|
|
#
|
|
# Last Server Used File Name:
|
|
# The 'last_server' directive specifies the filename where the address of
|
|
# the last broker to which a connection was successfully established will
|
|
# be saved.
|
|
#
|
|
# last_server=<file_name>
|
|
#
|
|
last_server=/var/lib/gogoc/tsp-last-server.txt
|
|
|
|
#
|
|
# Always Use Last Known Working Server:
|
|
# The value of the 'always_use_same_server' directive determines whether the
|
|
# client should always try to connect to the broker found in the
|
|
# 'last_server' directive filename.
|
|
#
|
|
# always_use_same_server=<yes|no>
|
|
#
|
|
always_use_same_server=no
|
|
|
|
|
|
#################################### LOGGING ##################################
|
|
|
|
#
|
|
# Log Verbosity Configuration:
|
|
# The format is 'log_<destination>=level', where possible values for
|
|
# 'destination' are:
|
|
#
|
|
# - console (logging to the console [AKA stdout])
|
|
# - stderr (logging to standard error)
|
|
# - file (logging to a file)
|
|
# - syslog (logging to syslog [Unix only])
|
|
#
|
|
# and 'level' is a digit between 0 and 3. A 'level' value of 0 disables
|
|
# logging to the destination, while values 1 to 3 request increasing levels
|
|
# of log verbosity and detail. If 'level' is not specified, a value of 1 is
|
|
# assumed.
|
|
#
|
|
# Example:
|
|
# log_file=3 (Maximal logging to a file)
|
|
# log_stderr=0 (Logging to standard error disabled)
|
|
# log_console= (Minimal logging to the console)
|
|
#
|
|
# - Default configuration on Windows platforms:
|
|
#
|
|
# log_console=0
|
|
# log_stderr=0
|
|
# log_file=1
|
|
#
|
|
# - Default configuration on Unix platforms:
|
|
#
|
|
# log_console=0
|
|
# log_stderr=1
|
|
# log_file=0
|
|
# log_syslog=0
|
|
#
|
|
log_console=3
|
|
log_stderr=0
|
|
#log_file=
|
|
#log_syslog=
|
|
|
|
#
|
|
# Log File Name:
|
|
# When logging to file is requested using the 'log_file' directive, the name
|
|
# and path of the file to use may be specified using this directive.
|
|
#
|
|
# log_filename=<file_name>
|
|
#
|
|
log_filename=/var/log/gogoc/gogoc.log
|
|
|
|
#
|
|
# Log File Rotation:
|
|
# When logging to file is requested using the 'log_file' directive, log file
|
|
# rotation may be enabled. When enabled, the contents of the log file will
|
|
# be moved to a backup file just before it reaches the maximum log file size
|
|
# specified via this directive.
|
|
#
|
|
# The name of the backup file is the name of the original log file with
|
|
# '.<timestamp>' inserted before the file extension. If the file does not
|
|
# have an extension, '.<timestamp>' is appended to the name of the original
|
|
# log file. The timestamp specifies when the rotation occurred.
|
|
#
|
|
# After the contents of the log file have been moved to the backup file, the
|
|
# original file is cleared, and logging resumes at the beginning of the file.
|
|
#
|
|
# log_rotation=<yes|no>
|
|
#
|
|
log_rotation=yes
|
|
|
|
#
|
|
# Log File Rotation Size:
|
|
# The 'log_rotation_size' directive specifies the maximum size a log file may
|
|
# reach before rotation occurs, if enabled. The value is expressed in
|
|
# kilobytes.
|
|
#
|
|
# log_rotation_size=<16|32|128|1024>
|
|
#
|
|
log_rotation_size=32
|
|
|
|
#
|
|
# Deletion of rotated log files:
|
|
# The 'log_rotation_delete' directive specifies that no log backup will be
|
|
# kept. When rotation occurs, the file is immediately wiped out and a new
|
|
# log file is started.
|
|
#
|
|
# log_rotation_delete=<yes|no>
|
|
#
|
|
log_rotation_delete=no
|
|
|
|
#
|
|
# Syslog Logging Facility [Unix Only]:
|
|
# When logging to syslog is requested using the 'log_syslog' directive, the
|
|
# facility to use may be specified using this directive.
|
|
#
|
|
# syslog_facility=<USER|LOCAL[0-7]>
|
|
#
|
|
syslog_facility=USER
|
|
|
|
|
|
# end of gogoc.conf
|
|
#------------------------------------------------------------------------------
|