Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-19 03:05:14 +00:00
Code Issues Projects Releases Wiki Activity
658cf0d2cc
contiki/examples/jn516x/tsch/tx-power-verification
History
Theo van Daele 68b2b3dd1c Add examples for NXP JN516x using TSCH
2016-01-05 10:44:13 +01:00
..
node Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
rpl-border-router Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
README.md

README.md

The tx-power-control example can be used to check the link between a node and an rpl-border-router. After a link is established, the following coap rresources are exposed:

node: Set-Tx-Power: a PUT/POST resource to set the TX power of the device. The firmware in the device will set the TX power to the nearest available value. Get-Tx-Power: a GET resource to retrieve the actual Tx power that is set.

rpl-border-router: Get-RSSI: a GET resource that shows the detected energy level Get-Last-RSSI:a GET resource that shows the RSSI of the last received packet. When there is only 1 node, Get-Last-RSSI will show the effect of changing the TX power level on that node.