Benoît Thébaudeau 680050861c cc2538: gpio: Use accessor macros ... Use the GPIO accessor macros instead of copying raw register access code all over the place. This is cleaner and less error prone. This fixes the setting of the USB pull-up resistor that worked only by chance on the CC2538DK because it is controlled by the pin 0 of the used GPIO port. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>		2013-11-15 19:57:44 +01:00
..
dev	cc2538: gpio: Use accessor macros	2013-11-15 19:57:44 +01:00
usb	cc2538: gpio: Use accessor macros	2013-11-15 19:57:44 +01:00
cc2538.lds	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
clock.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
cpu.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
cpu.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
dbg.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
dbg.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
debug-uart.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
ieee-addr.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
ieee-addr.h	Change the InfoPage Location of the IEEE address	2013-04-17 15:44:01 +01:00
lpm.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
lpm.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
Makefile.cc2538	Added SPI driver for CC2538	2013-09-27 17:46:15 -04:00
mtarch.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
reg.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
rtimer-arch.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
rtimer-arch.h	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
slip-arch.c	New Platform: TI CC2538 Development Kit	2013-04-06 21:07:31 +01:00
spi-arch.h	Added SPI driver for CC2538	2013-09-27 17:46:15 -04:00