mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-17 13:29:10 +00:00
This is to prevent a compile error caused by function prototype conflict between a function called `select()` (present in a number of sensortag peripheral drivers) and the one in `sys/select.h`. The error manifests itself with gcc-arm-embedded version 5.2.1 20151202 (2015-q4). To fix the error we simply rename our function. Fixes #1434
328 lines
10 KiB
C
328 lines
10 KiB
C
/*
|
|
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup sensortag-cc26xx-opt-sensor
|
|
* @{
|
|
*
|
|
* \file
|
|
* Driver for the Sensortag-CC26xx Opt3001 light sensor
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki-conf.h"
|
|
#include "lib/sensors.h"
|
|
#include "opt-3001-sensor.h"
|
|
#include "sys/ctimer.h"
|
|
#include "ti-lib.h"
|
|
#include "board-i2c.h"
|
|
#include "sensor-common.h"
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include <math.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...)
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Slave address */
|
|
#define OPT3001_I2C_ADDRESS 0x45
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Register addresses */
|
|
#define REG_RESULT 0x00
|
|
#define REG_CONFIGURATION 0x01
|
|
#define REG_LOW_LIMIT 0x02
|
|
#define REG_HIGH_LIMIT 0x03
|
|
|
|
#define REG_MANUFACTURER_ID 0x7E
|
|
#define REG_DEVICE_ID 0x7F
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* Configuration Register Bits and Masks.
|
|
* We use uint16_t to read from / write to registers, meaning that the
|
|
* register's MSB is the variable's LSB.
|
|
*/
|
|
#define CONFIG_RN 0x00F0 /* [15..12] Range Number */
|
|
#define CONFIG_CT 0x0008 /* [11] Conversion Time */
|
|
#define CONFIG_M 0x0006 /* [10..9] Mode of Conversion */
|
|
#define CONFIG_OVF 0x0001 /* [8] Overflow */
|
|
#define CONFIG_CRF 0x8000 /* [7] Conversion Ready Field */
|
|
#define CONFIG_FH 0x4000 /* [6] Flag High */
|
|
#define CONFIG_FL 0x2000 /* [5] Flag Low */
|
|
#define CONFIG_L 0x1000 /* [4] Latch */
|
|
#define CONFIG_POL 0x0800 /* [3] Polarity */
|
|
#define CONFIG_ME 0x0400 /* [2] Mask Exponent */
|
|
#define CONFIG_FC 0x0300 /* [1..0] Fault Count */
|
|
|
|
/* Possible Values for CT */
|
|
#define CONFIG_CT_100 0x0000
|
|
#define CONFIG_CT_800 CONFIG_CT
|
|
|
|
/* Possible Values for M */
|
|
#define CONFIG_M_CONTI 0x0004
|
|
#define CONFIG_M_SINGLE 0x0002
|
|
#define CONFIG_M_SHUTDOWN 0x0000
|
|
|
|
/* Reset Value for the register 0xC810. All zeros except: */
|
|
#define CONFIG_RN_RESET 0x00C0
|
|
#define CONFIG_CT_RESET CONFIG_CT_800
|
|
#define CONFIG_L_RESET 0x1000
|
|
#define CONFIG_DEFAULTS (CONFIG_RN_RESET | CONFIG_CT_100 | CONFIG_L_RESET)
|
|
|
|
/* Enable / Disable */
|
|
#define CONFIG_ENABLE_CONTINUOUS (CONFIG_M_CONTI | CONFIG_DEFAULTS)
|
|
#define CONFIG_ENABLE_SINGLE_SHOT (CONFIG_M_SINGLE | CONFIG_DEFAULTS)
|
|
#define CONFIG_DISABLE CONFIG_DEFAULTS
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Register length */
|
|
#define REGISTER_LENGTH 2
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Sensor data size */
|
|
#define DATA_LENGTH 2
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* SENSOR_STATE_SLEEPING and SENSOR_STATE_ACTIVE are mutually exclusive.
|
|
* SENSOR_STATE_DATA_READY can be ORd with both of the above. For example the
|
|
* sensor may be sleeping but with a conversion ready to read out.
|
|
*/
|
|
#define SENSOR_STATE_SLEEPING 0
|
|
#define SENSOR_STATE_ACTIVE 1
|
|
#define SENSOR_STATE_DATA_READY 2
|
|
|
|
static int state = SENSOR_STATE_SLEEPING;
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Wait SENSOR_STARTUP_DELAY for the sensor to be ready - 125ms */
|
|
#define SENSOR_STARTUP_DELAY (CLOCK_SECOND >> 3)
|
|
|
|
static struct ctimer startup_timer;
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Select the sensor on the I2C bus
|
|
*/
|
|
static void
|
|
select_on_bus(void)
|
|
{
|
|
/* Select slave and set clock rate */
|
|
board_i2c_select(BOARD_I2C_INTERFACE_0, OPT3001_I2C_ADDRESS);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
notify_ready(void *not_used)
|
|
{
|
|
/*
|
|
* Depending on the CONFIGURATION.CONVERSION_TIME bits, a conversion will
|
|
* take either 100 or 800 ms. Here we inspect the CONVERSION_READY bit and
|
|
* if the reading is ready we notify, otherwise we just reschedule ourselves
|
|
*/
|
|
uint16_t val;
|
|
|
|
select_on_bus();
|
|
|
|
sensor_common_read_reg(REG_CONFIGURATION, (uint8_t *)&val, REGISTER_LENGTH);
|
|
|
|
if(val & CONFIG_CRF) {
|
|
sensors_changed(&opt_3001_sensor);
|
|
state = SENSOR_STATE_DATA_READY;
|
|
} else {
|
|
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Turn the sensor on/off
|
|
* \param enable TRUE: on, FALSE: off
|
|
*/
|
|
static void
|
|
enable_sensor(bool enable)
|
|
{
|
|
uint16_t val;
|
|
uint16_t had_data_ready = state & SENSOR_STATE_DATA_READY;
|
|
|
|
select_on_bus();
|
|
|
|
if(enable) {
|
|
val = CONFIG_ENABLE_SINGLE_SHOT;
|
|
|
|
/* Writing CONFIG_ENABLE_SINGLE_SHOT to M bits will clear CRF bits */
|
|
state = SENSOR_STATE_ACTIVE;
|
|
} else {
|
|
val = CONFIG_DISABLE;
|
|
|
|
/* Writing CONFIG_DISABLE to M bits will not clear CRF bits */
|
|
state = SENSOR_STATE_SLEEPING | had_data_ready;
|
|
}
|
|
|
|
sensor_common_write_reg(REG_CONFIGURATION, (uint8_t *)&val, REGISTER_LENGTH);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Read the result register
|
|
* \param raw_data Pointer to a buffer to store the reading
|
|
* \return TRUE if valid data
|
|
*/
|
|
static bool
|
|
read_data(uint16_t *raw_data)
|
|
{
|
|
bool success;
|
|
uint16_t val;
|
|
|
|
if((state & SENSOR_STATE_DATA_READY) != SENSOR_STATE_DATA_READY) {
|
|
return false;
|
|
}
|
|
|
|
select_on_bus();
|
|
|
|
success = sensor_common_read_reg(REG_CONFIGURATION, (uint8_t *)&val,
|
|
REGISTER_LENGTH);
|
|
|
|
if(success) {
|
|
success = sensor_common_read_reg(REG_RESULT, (uint8_t *)&val, DATA_LENGTH);
|
|
}
|
|
|
|
if(success) {
|
|
/* Swap bytes */
|
|
*raw_data = (val << 8) | (val >> 8 & 0xFF);
|
|
} else {
|
|
sensor_common_set_error_data((uint8_t *)raw_data, DATA_LENGTH);
|
|
}
|
|
|
|
return success;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Convert raw data to a value in lux
|
|
* \param raw_data data Pointer to a buffer with a raw sensor reading
|
|
* \return Converted value (lux)
|
|
*/
|
|
static float
|
|
convert(uint16_t raw_data)
|
|
{
|
|
uint16_t e, m;
|
|
|
|
m = raw_data & 0x0FFF;
|
|
e = (raw_data & 0xF000) >> 12;
|
|
|
|
return m * (0.01 * exp2(e));
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Returns a reading from the sensor
|
|
* \param type Ignored
|
|
* \return Illuminance in centilux
|
|
*/
|
|
static int
|
|
value(int type)
|
|
{
|
|
int rv;
|
|
uint16_t raw_val;
|
|
float converted_val;
|
|
|
|
rv = read_data(&raw_val);
|
|
|
|
if(rv == false) {
|
|
return CC26XX_SENSOR_READING_ERROR;
|
|
}
|
|
|
|
converted_val = convert(raw_val);
|
|
PRINTF("OPT: %04X r=%d (centilux)\n", raw_val,
|
|
(int)(converted_val * 100));
|
|
|
|
rv = (int)(converted_val * 100);
|
|
|
|
return rv;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Configuration function for the OPT3001 sensor.
|
|
*
|
|
* \param type Activate, enable or disable the sensor. See below
|
|
* \param enable
|
|
*
|
|
* When type == SENSORS_HW_INIT we turn on the hardware
|
|
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
|
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
|
*/
|
|
static int
|
|
configure(int type, int enable)
|
|
{
|
|
int rv = 0;
|
|
|
|
switch(type) {
|
|
case SENSORS_HW_INIT:
|
|
/*
|
|
* Device reset won't reset the sensor, so we put it to sleep here
|
|
* explicitly
|
|
*/
|
|
enable_sensor(0);
|
|
rv = 0;
|
|
break;
|
|
case SENSORS_ACTIVE:
|
|
if(enable) {
|
|
enable_sensor(1);
|
|
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
|
rv = 1;
|
|
} else {
|
|
ctimer_stop(&startup_timer);
|
|
enable_sensor(0);
|
|
rv = 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return rv;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Returns the status of the sensor
|
|
* \param type ignored
|
|
* \return The state of the sensor SENSOR_STATE_xyz
|
|
*/
|
|
static int
|
|
status(int type)
|
|
{
|
|
switch(type) {
|
|
case SENSORS_ACTIVE:
|
|
case SENSORS_READY:
|
|
default:
|
|
break;
|
|
}
|
|
return state;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
SENSORS_SENSOR(opt_3001_sensor, "OPT3001", value, configure, status);
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @} */
|