contiki/tools/stm32w/stm32w_flasher/py_files/stm32w_flasher.py

281 lines
10 KiB
Python
Executable File

#!/usr/bin/env python
import optparse, os, sys, time
# The binary file at [contiki]/tools/stm32w/stm32w_flasher/stm32w_flasher
# contained python code.
# This binary file did not work anymore on Ubuntu 12.04, so
# it was replaced by this extracted python code, as discussed
# with people at ST Crolles (France).
#
# Extraction and little adaptation performed by E.Duble (CNRS, LIG).
try:
import serial
import ftdi
import pyudev
except:
print 'Python modules serial, ftdi and pyudev could not be loaded.'
print 'Please install these dependencies:'
print '(On Ubuntu) $ sudo apt-get install python-serial python-ftdi python-pyudev'
sys.exit(-1)
from messages import infoMessage, errorMessage
from rs232_interface import rs232Interface, getFirstAvailableSerialPort
versionMajor = 2
versionMinor = 0
versionPatch = 1
versionQualifier = "b2"
version = "%d.%d.%d%s"%(versionMajor, versionMinor, versionPatch, versionQualifier)
commandTable = [
['-i', '--interface', 'store', "<rs232 | rf > specify flasher interface (default rs232)",None],
['-p', '--port', 'store', "</dev/ttyXXX | auto>: specify rs232 port or auto mode (only relevant if interface selected is rs232 or rf)", None],
['-f', '--flash-image', 'store_true', "program flash"],
['-a', '--address', 'store', "0xHHHHHHHH specify baseaddress (only relevat for .bin images)", "0x08000000"],
['-v', '--verify', 'store_true', "verify flash content against file", False],
#['-d', '--device-info', 'store_true', 'print information about the STM32W device', False],
['-r', '--reset', 'store_true', 'Reset device', False],
['-s', '--start', 'store_true', 'Start application', False],
['-m', '--masserase', 'store_true', 'Erase user flash (masserase)', False],
['-b', '--bootloader-mode', 'store_true', 'Device is already in bootloader mode.(Only relevant for rs232 interface)', False],
['-e', '--eui64', 'store', "0xHHHHHHHHHHHHHHHH specify EUI64 (only relevat for rf interface)", "0xFFFFFFFFFFFFFFFF"],
['', '--enable-readout-protection', 'store', "<0|1> Disable or enable readout protection", None],
['', '--set-write-protection', 'store', "0xHHHHHHHH Set write protection to hex value (each bit set to zero is protecting 4K)" , "0xFFFFFFFF"],
]
def initCommandLineParser():
"""Create a command-line parser and return it.
"""
USAGE = '%prog [option...] [filename{.s37|.bin}] ...'
DESCR = """ Flash programming utility for STM32W108 device """
parser = optparse.OptionParser(usage=USAGE, description=DESCR,
version='%%prog %s' % version)
for item in commandTable:
if len(item) > 4:
default = item[4]
else:
default = None
parser.add_option(item[0], item[1], action=item[2], help=item[3], default=default)
return parser
def getFileVersionDate(fname):
returnValue = ""
return returnValue
def initInterface (interface, port, noReset=False, rfMode=False, eui64=0):
returnValue = rs232Interface(port, noReset, rfMode, eui64)
if returnValue.init():
returnValue = None
return returnValue
def terminateInterface(interface):
if (isinstance(interface, rs232Interface)):
interface.terminate()
def flashImage (interface, inputFile, startAddress, doErase=True):
def progressReport(size, fileSize):
infoMessage ("Programming %05d/%05d\r"%(size,fileSize))
infoMessage ("Programming user flash\n")
if not interface.programUserFlash(inputFile, startAddress, progressReport, doErase):
infoMessage("Failed \n")
else:
infoMessage("Done \n")
def verifyFlashImage (interface, inputFile, startAddress):
def progressReport(size, fileSize):
infoMessage ("Verifying %05d/%05d\r"%(size,fileSize))
infoMessage ("Verifying user flash\n")
if not interface.verifyFlash(inputFile, startAddress, progressReport):
infoMessage("Failed \n")
else:
infoMessage("Done \n")
def resetDevice (interface):
infoMessage ("Resetting device\n")
returnValue = not interface.startApplication(0)
if (returnValue):
infoMessage("Failed \n")
else:
infoMessage("Done \n")
def startApplication (interface, startAddress):
infoMessage ("Starting application from address: %08x\n"%startAddress)
if not interface.startApplication(startAddress):
infoMessage("Failed \n")
else:
infoMessage("Done \n")
def eraseUserFlash (interface):
infoMessage ("Erasing user flash (mass erase)\n")
if not interface.eraseUserFlash():
infoMessage("Failed \n")
else:
infoMessage("Done \n")
def printBanner():
infoMessage ("STM32W flasher utility version %s\n"%version)
if __name__ == '__main__':
try:
absolutePath = os.path.abspath(sys.argv[0])
if "frozen" in dir(sys):
version += " " + getFileVersionDate(sys.executable)
else:
version += "-" + time.strftime("%Y%m%d",time.localtime(os.stat(absolutePath).st_ctime))
version += " for Linux"
interfaceHandle = None
printBanner()
parser = initCommandLineParser()
(options, args) = parser.parse_args()
rfMode = False
# Check command line option
if (len(args) == 1):
if (len(sys.argv) == 2):
# No option means flashing by default
options.flash_image = True
options.image = args[0]
if (len(args) > 1):
parser.print_help()
sys.exit(-1)
if (len(sys.argv) == 1):
parser.print_help()
sys.exit(0)
if (options.interface is None):
# Set defualt for interface
if (options.port is None):
options.interface = "rs232"
options.port = "auto"
else:
options.interface = "rs232"
elif (options.interface == "rf"):
rfMode = True
options.address = "0x08003000"
options.interface = "rs232"
options.bootloader_mode = True
options.interface = options.interface.lower()
if ((options.interface == "rs232") and (options.port == None)):
parser.print_help()
sys.exit(-1)
if (options.interface != "rs232" and options.interface != "jlink"):
parser.print_help()
sys.exit(-1)
startAddress = int(options.address,16)
if (options.interface == "rs232"):
optionArg = options.port.upper()
if (optionArg == "AUTO"):
port = getFirstAvailableSerialPort()
if port is None:
errorMessage ("Unable to find serial port in auto mode: no STM32W boards detected\n")
sys.exit(-1)
infoMessage ("Auto mode selected serial port: %s\n"%port)
elif (options.port[:4] == "/dev"): ## For Linux
port = options.port
else:
try:
port = int(optionArg)
except ValueError:
errorMessage("Invalid port: %s\n"%options.port)
sys.exit(-1)
else:
port = None
if (options.interface == "jlink"):
errorMessage("JLink not yet supported.\n")
sys.exit(-1)
if (options.start and options.reset):
errorMessage ("Only one option between -s (--start) and -r (--reset) may be specified")
sys.exit(-1)
interfaceHandle = initInterface(options.interface, port, options.bootloader_mode, rfMode, int(options.eui64, 16))
if interfaceHandle is None:
errorMessage("Error while initiliazing interface\n")
sys.exit(-1)
readoutProtection = interfaceHandle.isReadProtectionActive()
if readoutProtection:
infoMessage("!Warning: Readout protection is active\n")
options.device_info = False
if (options.masserase):
eraseUserFlash(interfaceHandle)
if (options.enable_readout_protection is not None):
if (options.enable_readout_protection == "1"):
if not readoutProtection:
infoMessage("Enabling readout protection\n")
interfaceHandle.enableReadProtection(True)
infoMessage("Done\n")
else:
infoMessage("Readout protection already enabled, no action\n")
elif (options.enable_readout_protection == "0"):
if readoutProtection:
infoMessage("Disabling readout protection (this will clear user flash and CIB)\n")
interfaceHandle.enableReadProtection(False)
infoMessage("Done\n")
else:
infoMessage("Readout protection already disaabled, no action\n")
else:
errorMessage("Invalid value for --enable-readout-protection\n")
terminateInterface(interfaceHandle)
sys.exit(-1)
if options.flash_image:
flashImage(interfaceHandle, options.image, startAddress, not options.masserase)
if options.verify and not readoutProtection:
verifyFlashImage(interfaceHandle, options.image, startAddress)
if (options.start):
startApplication(interfaceHandle, startAddress)
if (options.reset):
resetDevice(interfaceHandle)
terminateInterface(interfaceHandle)
sys.exit (0)
except KeyboardInterrupt:
infoMessage ("User break\n")
terminateInterface(interfaceHandle)
sys.exit(-1)
except Exception, inst:
if not ("frozen" in dir(sys)):
raise
else:
errorMessage("Internal error\n")
errorMessage("%s\n"%repr(type(inst))) # the exception instance
errorMessage("%s\n"%repr(inst.args)) # arguments stored in .args
if interfaceHandle:
terminateInterface(interfaceHandle)
sys.exit(-1)