mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-18 20:28:59 +00:00
.. | ||
Huginn | ||
Muninn | ||
Makefile | ||
Makefile.webserver | ||
README | ||
webserver6.c |
This example features a simple webserver running on top of the IPv6 contiki stack. For this example to run properly the UIP_CONF_TCP compilation flag must be set to 1 in the contiki-conf.h file of the platform. If you are using the minimal-net platform on linux you can test the code as follows: - First do 'ifconfig tap0 inet6 3ffe:0501:ffff:0100:0206:98ff:fe00:0231' or 'ip -6 address add 3ffe:0501:ffff:0100:0206:98ff:fe00:0231' dev tap0. - You might need to add a route 'ip -6 route add aaaa:0000:0000:0000:0206:98ff:fe00:0232/64 dev tap0' - Then configure a global address by sending a router advertisement (RA) with a prefix option. You can use radvd for example to generate such a packet. Assume the prefix in the RA is: 3ffe:0501:ffff:0100:0000:0000:0000:0000/64. and that the resulting address created by the contiki stack is: 3ffe:0501:ffff:0100:0206:98ff:fe00:0232 - Finally you can use 'wget http://[3ffe:0501:ffff:0100:0206:98ff:fe00:0232]' to get the web page (index.html file) Two alternate servers Huginn and Muninn are included in this directory. Use e.g. $make WEBDIR=Huginn to generate a webserver6-huginn.elf file. The ipv6 address suffix and server names are specified in the makefsdata.h file. $make COFFEE_FILES=1 or 3 uses a static coffee file system in eeprom or program flash memory. Files can not be created, but existing files can be rewritten using http POST via upload.html. When switching coffee types a $make clean should be done to ensure all c source is on the same page (ahem). -->This is under development and rewrites are not working yet. Future plans are for $make COFFEE_FILES=2 or 4 for a full coffee file system.