mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-16 22:28:59 +00:00
287 lines
8.2 KiB
C
287 lines
8.2 KiB
C
#ifndef CONTIKI_CONF_H_
|
|
#define CONTIKI_CONF_H_
|
|
|
|
#include "8051def.h"
|
|
#include "sys/cc.h"
|
|
#include <string.h>
|
|
|
|
/* Include Project Specific conf */
|
|
#ifdef PROJECT_CONF_H
|
|
#include "project-conf.h"
|
|
#endif /* PROJECT_CONF_H */
|
|
|
|
/*
|
|
* Define this as 1 to poll the etimer process from within main instead of from
|
|
* the clock ISR. This reduces the ISR's stack usage and may prevent crashes.
|
|
*/
|
|
#ifndef CLOCK_CONF_STACK_FRIENDLY
|
|
#define CLOCK_CONF_STACK_FRIENDLY 1
|
|
#endif
|
|
|
|
/* Memory filesystem RAM size. */
|
|
#define CFS_RAM_CONF_SIZE 512
|
|
|
|
/* Logging.. */
|
|
#define LOG_CONF_ENABLED 0
|
|
|
|
#ifndef STACK_CONF_DEBUGGING
|
|
#define STACK_CONF_DEBUGGING 0
|
|
#endif
|
|
|
|
/* Energest Module */
|
|
#ifndef ENERGEST_CONF_ON
|
|
#define ENERGEST_CONF_ON 0
|
|
#endif
|
|
|
|
/* Verbose Startup? Turning this off reduces our footprint a fair bit */
|
|
#define STARTUP_CONF_VERBOSE 0
|
|
|
|
/* More CODE space savings by turning off process names */
|
|
#define PROCESS_CONF_NO_PROCESS_NAMES 1
|
|
|
|
/*
|
|
* UARTs: 1=>Enabled, 0=>Disabled. Default: Both Disabled (see uart.h)
|
|
* Disabling UARTs reduces our CODE footprint
|
|
* Disabling UART1 also disables all debugging output.
|
|
* Should be used when nodes are meant to run on batteries
|
|
*
|
|
* On N740, by enabling UART1, you are also enabling an ugly hack which aims
|
|
* to detect the USB connection during execution. It will then turn on/off
|
|
* UART1 RX interrupts accordingly. This seems to work but you have been warned
|
|
* If you start seeing random crashes when on battery, this is where to look.
|
|
*/
|
|
#ifndef UART_ONE_CONF_ENABLE
|
|
#define UART_ONE_CONF_ENABLE 1
|
|
#endif
|
|
#ifndef UART_ONE_CONF_WITH_INPUT
|
|
#define UART_ONE_CONF_WITH_INPUT 0
|
|
#endif
|
|
#define UART_ZERO_CONF_ENABLE 0
|
|
|
|
#ifndef UART_ONE_CONF_HIGH_SPEED
|
|
#define UART_ONE_CONF_HIGH_SPEED 0
|
|
#endif
|
|
|
|
#define SLIP_RADIO_CONF_NO_PUTCHAR 1
|
|
|
|
#if defined (UIP_FALLBACK_INTERFACE) || defined (CMD_CONF_OUTPUT)
|
|
#define SLIP_ARCH_CONF_ENABLE 1
|
|
#endif
|
|
|
|
/* Are we a SLIP bridge? */
|
|
#if SLIP_ARCH_CONF_ENABLE
|
|
/* Make sure UART1 is enabled, with interrupts */
|
|
#undef UART_ONE_CONF_ENABLE
|
|
#undef UART_ONE_CONF_WITH_INPUT
|
|
#define UART_ONE_CONF_ENABLE 1
|
|
#define UART_ONE_CONF_WITH_INPUT 1
|
|
#endif
|
|
|
|
/* Output all captured frames over the UART in hexdump format */
|
|
#ifndef CC2430_RF_CONF_HEXDUMP
|
|
#define CC2430_RF_CONF_HEXDUMP 0
|
|
#endif
|
|
|
|
#if CC2430_RF_CONF_HEXDUMP
|
|
/* We need UART1 output */
|
|
#undef UART_ONE_CONF_ENABLE
|
|
#define UART_ONE_CONF_ENABLE 1
|
|
#endif
|
|
|
|
/* Code Shortcuts */
|
|
/*
|
|
* When set, the RF driver is no longer a contiki process and the RX ISR is
|
|
* disabled. Instead of polling the radio process when data arrives, we
|
|
* periodically check for data by directly invoking the driver from main()
|
|
*
|
|
* When set, this directive also configures the following bypasses:
|
|
* - process_post_synch() in tcpip_input() (we call packet_input())
|
|
* - process_post_synch() in tcpip_uipcall (we call the relevant pthread)
|
|
* - mac_call_sent_callback() is replaced with sent() in various places
|
|
*
|
|
* These are good things to do, they reduce stack usage and prevent crashes
|
|
*/
|
|
#define NETSTACK_CONF_SHORTCUTS 1
|
|
|
|
/*
|
|
* Sensors
|
|
* It is harmless to #define XYZ 1
|
|
* even if the sensor is not present on our device
|
|
*/
|
|
#ifndef BUTTON_SENSOR_CONF_ON
|
|
#define BUTTON_SENSOR_CONF_ON 1 /* Buttons */
|
|
#endif
|
|
/* ADC - Turning this off will disable everything below */
|
|
#ifndef ADC_SENSOR_CONF_ON
|
|
#define ADC_SENSOR_CONF_ON 1
|
|
#endif
|
|
#define TEMP_SENSOR_CONF_ON 1 /* Temperature */
|
|
#define BATTERY_SENSOR_CONF_ON 1 /* Battery */
|
|
#define VDD_SENSOR_CONF_ON 1 /* Supply Voltage */
|
|
#define ACC_SENSOR_CONF_ON 1 /* Accelerometer */
|
|
#define ACC_SENSOR_CONF_GSEL 0 /* Acc. g-Select => 1: +/-11g, 0: +/-3g */
|
|
#define LIGHT_SENSOR_CONF_ON 1 /* Light */
|
|
|
|
/* Watchdog */
|
|
#define WDT_CONF_INTERVAL 0
|
|
#define WDT_CONF_TIMER_MODE 0 /* 0 or undefined for watchdog mode */
|
|
|
|
/* Low Power Modes - We only support PM0/Idle and PM1 */
|
|
#ifndef LPM_CONF_MODE
|
|
#define LPM_CONF_MODE 1 /* 0: no LPM, 1: MCU IDLE, 2: Drop to PM1 */
|
|
#endif
|
|
|
|
/* DMA Configuration */
|
|
#ifndef DMA_CONF_ON
|
|
#define DMA_CONF_ON 0
|
|
#endif
|
|
|
|
/* N740 Serial Flash */
|
|
#ifndef M25P16_CONF_ON
|
|
#define M25P16_CONF_ON 1
|
|
#endif
|
|
|
|
/* XXX argh, ugly hack to make stuff compile! */
|
|
#define snprintf(BUF, SIZE, ...) sprintf(BUF, __VA_ARGS__)
|
|
|
|
/* Sensinode-Specific Tools and APPs */
|
|
/* Viztool on by default for IPv6 builds */
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
#ifndef VIZTOOL_CONF_ON
|
|
#define VIZTOOL_CONF_ON 1
|
|
#endif /* VIZTOOL_CONF_ON */
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
|
|
/* BatMon off by default unless we build with APPS += batmon */
|
|
#ifndef BATMON_CONF_ON
|
|
#define BATMON_CONF_ON 0
|
|
#endif
|
|
|
|
/* Network Stack */
|
|
#ifndef NETSTACK_CONF_NETWORK
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
|
#else
|
|
#define NETSTACK_CONF_NETWORK rime_driver
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
#endif /* NETSTACK_CONF_NETWORK */
|
|
|
|
#ifndef NETSTACK_CONF_MAC
|
|
#define NETSTACK_CONF_MAC csma_driver
|
|
#endif
|
|
|
|
#ifndef NETSTACK_CONF_RDC
|
|
#define NETSTACK_CONF_RDC nullrdc_driver
|
|
#define NULLRDC_802154_AUTOACK 1
|
|
#define NULLRDC_802154_AUTOACK_HW 1
|
|
#endif
|
|
|
|
#ifndef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
|
|
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
|
#endif
|
|
|
|
#ifndef NETSTACK_CONF_FRAMER
|
|
#define NETSTACK_CONF_FRAMER framer_802154
|
|
#endif
|
|
|
|
#define NETSTACK_CONF_RADIO cc2430_rf_driver
|
|
|
|
/* RF Config */
|
|
#define IEEE802154_CONF_PANID 0x4C55 /* LU */
|
|
|
|
#ifndef CC2430_RF_CONF_CHANNEL
|
|
#define CC2430_RF_CONF_CHANNEL 25
|
|
#endif /* CC2430_RF_CONF_CHANNEL */
|
|
|
|
#ifndef CC2430_RF_CONF_TX_POWER
|
|
#define CC2430_RF_CONF_TX_POWER 0x5F /* Datasheet recommended value */
|
|
#endif
|
|
|
|
#ifndef CC2430_RF_CONF_AUTOACK
|
|
#define CC2430_RF_CONF_AUTOACK 1
|
|
#endif /* CC2430_CONF_AUTOACK */
|
|
|
|
#if NETSTACK_CONF_WITH_IPV6
|
|
/* Addresses, Sizes and Interfaces */
|
|
/* 8-byte addresses here, 2 otherwise */
|
|
#define LINKADDR_CONF_SIZE 8
|
|
#define UIP_CONF_LL_802154 1
|
|
#define UIP_CONF_LLH_LEN 0
|
|
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
|
|
|
/* TCP, UDP, ICMP */
|
|
#define UIP_CONF_TCP 0
|
|
#define UIP_CONF_UDP 1
|
|
#define UIP_CONF_UDP_CHECKSUMS 1
|
|
|
|
/* ND and Routing */
|
|
#ifndef UIP_CONF_ROUTER
|
|
#define UIP_CONF_ROUTER 1
|
|
#endif
|
|
|
|
#define UIP_CONF_ND6_SEND_RA 0
|
|
#define UIP_CONF_IP_FORWARD 0
|
|
#define RPL_CONF_STATS 0
|
|
#define RPL_CONF_MAX_DAG_ENTRIES 1
|
|
#ifndef RPL_CONF_OF
|
|
#define RPL_CONF_OF rpl_mrhof
|
|
#endif
|
|
|
|
#define UIP_CONF_ND6_REACHABLE_TIME 600000
|
|
#define UIP_CONF_ND6_RETRANS_TIMER 10000
|
|
|
|
#ifndef NBR_TABLE_CONF_MAX_NEIGHBORS
|
|
#define NBR_TABLE_CONF_MAX_NEIGHBORS 4 /* Handle n Neighbors */
|
|
#endif
|
|
#ifndef UIP_CONF_MAX_ROUTES
|
|
#define UIP_CONF_MAX_ROUTES 4 /* Handle n Routes */
|
|
#endif
|
|
|
|
/* uIP */
|
|
#ifndef UIP_CONF_BUFFER_SIZE
|
|
#define UIP_CONF_BUFFER_SIZE 240
|
|
#endif
|
|
#define UIP_CONF_IPV6_QUEUE_PKT 0
|
|
#define UIP_CONF_IPV6_CHECKS 1
|
|
#define UIP_CONF_IPV6_REASSEMBLY 0
|
|
|
|
/* 6lowpan */
|
|
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
|
#ifndef SICSLOWPAN_CONF_FRAG
|
|
#define SICSLOWPAN_CONF_FRAG 0 /* About 2KB of CODE if 1 */
|
|
#endif
|
|
#define SICSLOWPAN_CONF_MAXAGE 8
|
|
|
|
/* Define our IPv6 prefixes/contexts here */
|
|
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
|
|
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 { \
|
|
addr_contexts[0].prefix[0] = 0x20; \
|
|
addr_contexts[0].prefix[1] = 0x01; \
|
|
addr_contexts[0].prefix[2] = 0x06; \
|
|
addr_contexts[0].prefix[3] = 0x30; \
|
|
addr_contexts[0].prefix[4] = 0x03; \
|
|
addr_contexts[0].prefix[5] = 0x01; \
|
|
addr_contexts[0].prefix[6] = 0x64; \
|
|
addr_contexts[0].prefix[7] = 0x53; \
|
|
}
|
|
|
|
#define MAC_CONF_CHANNEL_CHECK_RATE 8
|
|
#ifndef QUEUEBUF_CONF_NUM
|
|
#define QUEUEBUF_CONF_NUM 6
|
|
#endif
|
|
|
|
#else /* NETSTACK_CONF_WITH_IPV6 */
|
|
/* Network setup for non-IPv6 (rime). */
|
|
#define UIP_CONF_IP_FORWARD 1
|
|
#define UIP_CONF_BUFFER_SIZE 108
|
|
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
|
|
#define QUEUEBUF_CONF_NUM 8
|
|
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
|
|
|
/* Prevent SDCC compile error when UIP_CONF_ROUTER == 0 */
|
|
#if !UIP_CONF_ROUTER
|
|
#define UIP_CONF_DS6_AADDR_NBU 1
|
|
#endif
|
|
|
|
#endif /* CONTIKI_CONF_H_ */
|