mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 16:29:34 +00:00
134 lines
3.2 KiB
C
134 lines
3.2 KiB
C
/**
|
|
* \file
|
|
*
|
|
* uart initialization routines
|
|
*
|
|
* \author
|
|
*
|
|
* Anthony "Asterisk" Ambuehl
|
|
*
|
|
* non-interrupt routines typically only called once, stored in any bank.
|
|
*
|
|
*/
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
#include "banked.h"
|
|
#include "cc2430_sfr.h"
|
|
|
|
#include "dev/leds.h"
|
|
#include "dev/uart.h"
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
uart0_init(uint32_t speed) __banked
|
|
{
|
|
if(speed == 115200) {
|
|
U0BAUD=216; /*115200*/
|
|
U0GCR =11; /*LSB first and 115200*/
|
|
}
|
|
else if(speed == 38400) {
|
|
U0BAUD=59; /*38400*/
|
|
U0GCR =10; /*LSB first and 38400*/
|
|
}
|
|
else if(speed == 9600) {
|
|
U0BAUD= 59; /* 9600 */
|
|
U0GCR = 8; /*LSB first and 9600*/
|
|
}
|
|
else { return; }
|
|
|
|
#ifdef UART0_ALTERNATIVE_2
|
|
PERCFG |= U0CFG; /*alternative port 2 = P1.5-2*/
|
|
#ifdef UART0_RTSCTS
|
|
P1SEL |= 0x3C; /*peripheral select for TX and RX, RTS, CTS*/
|
|
#else
|
|
P1SEL |= 0x30; /*peripheral select for TX and RX*/
|
|
P1 &= ~0x08; /*RTS down*/
|
|
#endif
|
|
P1DIR |= 0x28; /*RTS, TX out*/
|
|
P1DIR &= ~0x14; /*CTS & RX in*/
|
|
#else
|
|
PERCFG &= ~U0CFG; /*alternative port 1 = P0.5-2*/
|
|
#ifdef UART0_RTSCTS
|
|
P0SEL |= 0x3C; /*peripheral select for TX and RX, RTS, CTS*/
|
|
#else
|
|
P0SEL |= 0x0C; /*peripheral select for TX and RX*/
|
|
P0 &= ~0x20; /*RTS down*/
|
|
#endif
|
|
P0DIR |= 0x28; /*RTS & TX out*/
|
|
P0DIR &= ~0x14; /*CTS & RX in*/
|
|
#endif
|
|
|
|
|
|
#ifdef UART0_RTSCTS
|
|
U0UCR = 0x42; /*defaults: 8N1, RTS/CTS, high stop bit*/
|
|
#else
|
|
U0UCR = 0x02; /*defaults: 8N1, no flow control, high stop bit*/
|
|
#endif
|
|
|
|
U0CSR = U_MODE | U_RE | U_TXB; /*UART mode, receiver enable, TX done*/
|
|
|
|
/*set priority group of group 3 to highest, so the UART won't miss bytes*/
|
|
IP1 |= IP1_3;
|
|
IP0 |= IP0_3;
|
|
|
|
IEN0_URX0IE = 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/* UART1 initialization */
|
|
void
|
|
uart1_init(uint32_t speed) __banked
|
|
{
|
|
#ifdef UART1_ALTERNATIVE_1
|
|
PERCFG &= ~U1CFG; /*alternative port 1 = P0.5-2*/
|
|
#ifdef UART1_RTSCTS
|
|
P0SEL |= 0x3C; /*peripheral select for TX and RX, RTS, CTS*/
|
|
#else
|
|
P0SEL |= 0x30; /*peripheral select for TX and RX*/
|
|
P0 &= ~0x08; /*RTS down*/
|
|
#endif
|
|
P0DIR |= 0x18; /*RTS, TX out*/
|
|
P0DIR &= ~0x24; /*CTS, RX in*/
|
|
#else
|
|
PERCFG |= U1CFG; /*alternative port 2 = P1.7-4*/
|
|
#ifdef UART1_RTSCTS
|
|
P1SEL |= 0xF0; /*peripheral select for TX and RX*/
|
|
#else
|
|
P1SEL |= 0xC0; /*peripheral select for TX and RX*/
|
|
P1 &= ~0x20; /*RTS down*/
|
|
#endif
|
|
P1DIR |= 0x60; /*RTS, TX out*/
|
|
P1DIR &= ~0x90; /*CTS, RX in*/
|
|
#endif
|
|
|
|
if(speed == 115200) {
|
|
U1BAUD=216; /*115200*/
|
|
U1GCR =11; /*LSB first and 115200*/
|
|
}
|
|
|
|
if(speed == 38400) {
|
|
U1BAUD=59; /*38400*/
|
|
U1GCR =10; /*LSB first and 38400*/
|
|
}
|
|
|
|
if(speed == 9600) {
|
|
U1BAUD= 59; /* 9600 */
|
|
U1GCR = 8; /*LSB first and 9600*/
|
|
}
|
|
|
|
#ifdef UART1_RTSCTS
|
|
U1UCR = 0x42; /*defaults: 8N1, RTS/CTS, high stop bit*/
|
|
#else
|
|
U1UCR = 0x02; /*defaults: 8N1, no flow control, high stop bit*/
|
|
#endif
|
|
|
|
U1CSR = U_MODE | U_RE | U_TXB; /*UART mode, receiver enable, TX done*/
|
|
|
|
/*set priority group of group 3 to highest, so the UART won't miss bytes*/
|
|
IP1 |= IP1_3;
|
|
IP0 |= IP0_3;
|
|
|
|
IEN0_URX1IE = 1; /* Enable the RX interrupt */
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|