mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-12 18:06:40 +00:00
36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
This adds the hello-world process in hello-world.c to the platform build,
|
|
which prints "Hello-world" to stdout on startup.
|
|
|
|
The entire platform is built, with uip stack, radio drivers, routing, etc.
|
|
So it is not usually a simple build! The native platform is the default:
|
|
$make
|
|
$./hello-world.native
|
|
Starting Contiki
|
|
Hello, world
|
|
|
|
When switching between ipv4 and ipv6 builds on a platform,
|
|
$make TARGET=<platform> clean
|
|
else the library for that platform will contain duplicate or unresolved modules.
|
|
|
|
For example, using a loopback interface with the minimal-net platform:
|
|
[To install a loopback see http://www.sourceforge.net/apps/mediawiki/contiki/index.php?title=Capturing_loopback_traffic_with_Wireshark]
|
|
$cd /examples/hello-world
|
|
$make TARGET=minimal-net
|
|
$./hello-world.minimal-net
|
|
Hello, world
|
|
IP Address: 10.1.1.1
|
|
Subnet Mask: 255.0.0.0
|
|
Def. Router: 10.1.1.100
|
|
^C
|
|
$make TARGET=minimal-net clean
|
|
$make UIP_CONF_IPV6=1 TARGET=minimal-net
|
|
$./hello-world.minimal-net
|
|
Hello, world
|
|
IPV6 Address: [aaaa::206:98ff:fe00:232]
|
|
IPV6 Address: [fe80::206:98ff:fe00:232]
|
|
^C
|
|
|
|
Note to AVR Raven users: Output goes to UART1, not the LCD. To see it,
|
|
$make TARGET=avr-raven hello-world.elf
|
|
Load the .elf in AVR Studio and connect a hapsim terminal to the 1284p simulation.
|