Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-12-23 16:29:34 +00:00
Code Issues Projects Releases Wiki Activity
8699f7741d
contiki/cpu/avr/radio/rf230bb/halbb.c
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES 
#defines.
2012-09-04 11:12:18 -06:00

811 lines
26 KiB
C
Raw Blame History

/* Copyright (c) 2009, Swedish Institute of Computer Science
* All rights reserved.
*
* Additional fixes for AVR contributed by:
*
* Colin O'Flynn coflynn@newae.com
* Eric Gnoske egnoske@gmail.com
* Blake Leverett bleverett@gmail.com
* Mike Vidales mavida404@gmail.com
* Kevin Brown kbrown3@uccs.edu
* Nate Bohlmann nate@elfwerks.com
* David Kopf dak664@embarqmail.com
* Ivan Delamer delamer@ieee.com
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the copyright holders nor the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*
*/
/**
* \addtogroup wireless
* @{
*/
/**
* \defgroup hal RF230 hardware level drivers
* @{
*/
/**
* \file
* This file contains low-level radio driver code.
* This version is optimized for use with the "barebones" RF230bb driver,
* which communicates directly with the contiki core MAC layer.
* It is optimized for speed at the expense of generality.
*/
#include "contiki-conf.h"
#if DEBUGFLOWSIZE
extern uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
#define DEBUGFLOW(c) if (debugflowsize<(DEBUGFLOWSIZE-1)) debugflow[debugflowsize++]=c
#else
#define DEBUGFLOW(c)
#endif
/*============================ INCLUDE =======================================*/
#include <stdlib.h>
#include "hal.h"
#if defined(__AVR_ATmega128RFA1__)
#include <avr/io.h>
#include "atmega128rfa1_registermap.h"
#else
#include "at86rf230_registermap.h"
#endif
/*============================ VARIABLES =====================================*/
volatile extern signed char rf230_last_rssi;
/*============================ CALLBACKS =====================================*/
/*============================ IMPLEMENTATION ================================*/
#if defined(__AVR_ATmega128RFA1__)
/* AVR1281 with internal RF231 radio */
#include <avr/interrupt.h>
#elif defined(__AVR__)
/*
* AVR with hardware SPI tranfers (TODO: move to hw spi hal for avr cpu)
*/
#include <avr/io.h>
#include <avr/interrupt.h>
#define HAL_SPI_TRANSFER_OPEN() { \
HAL_ENTER_CRITICAL_REGION(); \
HAL_SS_LOW(); /* Start the SPI transaction by pulling the Slave Select low. */
#define HAL_SPI_TRANSFER_WRITE(to_write) (SPDR = (to_write))
#define HAL_SPI_TRANSFER_WAIT() ({while ((SPSR & (1 << SPIF)) == 0) {;}}) /* gcc extension, alternative inline function */
#define HAL_SPI_TRANSFER_READ() (SPDR)
#define HAL_SPI_TRANSFER_CLOSE() \
HAL_SS_HIGH(); /* End the transaction by pulling the Slave Select High. */ \
HAL_LEAVE_CRITICAL_REGION(); \
}
#define HAL_SPI_TRANSFER(to_write) ( \
HAL_SPI_TRANSFER_WRITE(to_write), \
HAL_SPI_TRANSFER_WAIT(), \
HAL_SPI_TRANSFER_READ() )
#else /* __AVR__ */
/*
* Other SPI architecture (parts to core, parts to m16c6Xp
*/
#include "contiki-mulle.h" // MULLE_ENTER_CRITICAL_REGION
// Software SPI transfers
#define HAL_SPI_TRANSFER_OPEN() { uint8_t spiTemp; \
HAL_ENTER_CRITICAL_REGION(); \
HAL_SS_LOW(); /* Start the SPI transaction by pulling the Slave Select low. */
#define HAL_SPI_TRANSFER_WRITE(to_write) (spiTemp = spiWrite(to_write))
#define HAL_SPI_TRANSFER_WAIT() ({0;})
#define HAL_SPI_TRANSFER_READ() (spiTemp)
#define HAL_SPI_TRANSFER_CLOSE() \
HAL_SS_HIGH(); /* End the transaction by pulling the Slave Select High. */ \
HAL_LEAVE_CRITICAL_REGION(); \
}
#define HAL_SPI_TRANSFER(to_write) (spiTemp = spiWrite(to_write))
inline uint8_t spiWrite(uint8_t byte)
{
uint8_t data = 0;
uint8_t mask = 0x80;
do
{
if( (byte & mask) != 0 )
HAL_PORT_MOSI |= (1 << HAL_MOSI_PIN); //call MOSI.set();
else
HAL_PORT_MOSI &= ~(1 << HAL_MOSI_PIN); //call MOSI.clr();
if( (HAL_PORT_MISO & (1 << HAL_MISO_PIN)) > 0) //call MISO.get() )
data |= mask;
HAL_PORT_SCK &= ~(1 << HAL_SCK_PIN); //call SCLK.clr();
HAL_PORT_SCK |= (1 << HAL_SCK_PIN); //call SCLK.set();
} while( (mask >>= 1) != 0 );
return data;
}
#endif /* !__AVR__ */
/** \brief This function initializes the Hardware Abstraction Layer.
*/
#if defined(__AVR_ATmega128RFA1__)
void
hal_init(void)
{
/*Reset variables used in file.*/
/* (none at the moment) */
}
#elif defined(__AVR__)
#define HAL_RF230_ISR() ISR(RADIO_VECT)
void
hal_init(void)
{
/*Reset variables used in file.*/
/*IO Specific Initialization - sleep and reset pins. */
/* Set pins low before they are initialized as output? Does not seem to matter */
// hal_set_rst_low();
// hal_set_slptr_low();
DDR_SLP_TR |= (1 << SLP_TR); /* Enable SLP_TR as output. */
DDR_RST |= (1 << RST); /* Enable RST as output. */
/*SPI Specific Initialization.*/
/* Set SS, CLK and MOSI as output. */
/* To avoid a SPI glitch, the port register shall be set before the DDR register */
HAL_PORT_SPI |= (1 << HAL_DD_SS) | (1 << HAL_DD_SCK); /* Set SS and CLK high */
HAL_DDR_SPI |= (1 << HAL_DD_SS) | (1 << HAL_DD_SCK) | (1 << HAL_DD_MOSI);
HAL_DDR_SPI &=~ (1<< HAL_DD_MISO); /* MISO input */
/* Run SPI at max speed */
SPCR = (1 << SPE) | (1 << MSTR); /* Enable SPI module and master operation. */
SPSR = (1 << SPI2X); /* Enable doubled SPI speed in master mode. */
/* Enable interrupts from the radio transceiver. */
hal_enable_trx_interrupt();
}
#else /* __AVR__ */
#define HAL_RF230_ISR() M16C_INTERRUPT(M16C_INT1)
#define HAL_TIME_ISR() M16C_INTERRUPT(M16C_TMRB4)
#define HAL_TICK_UPCNT() (0xFFFF-TB4) // TB4 counts down so we need to convert it to upcounting
void
hal_init(void)
{
/*Reset variables used in file.*/
/*IO Specific Initialization - sleep and reset pins. */
DDR_SLP_TR |= (1 << SLP_TR); /* Enable SLP_TR as output. */
DDR_RST |= (1 << RST); /* Enable RST as output. */
/*SPI Specific Initialization.*/
/* Set SS, CLK and MOSI as output. */
HAL_DDR_SS |= (1 << HAL_SS_PIN);
HAL_DDR_SCK |= (1 << HAL_SCK_PIN);
HAL_DDR_MOSI |= (1 << HAL_MOSI_PIN);
HAL_DDR_MISO &= ~(1 << HAL_MISO_PIN);
/* Set SS */
HAL_PORT_SS |= (1 << HAL_SS_PIN); // HAL_SS_HIGH()
HAL_PORT_SCK &= ~(1 << HAL_SCK_PIN); // SCLK.clr()
/*TIMER Specific Initialization.*/
// Init count source (Timer B3)
TB3 = ((16*10) - 1); // 16 us ticks
TB3MR.BYTE = 0b00000000; // Timer mode, F1
TBSR.BIT.TB3S = 1; // Start Timer B3
TB4 = 0xFFFF; //
TB4MR.BYTE = 0b10000001; // Counter mode, count TB3
TBSR.BIT.TB4S = 1; // Start Timer B4
INT1IC.BIT.POL = 1; // Select rising edge
HAL_ENABLE_OVERFLOW_INTERRUPT(); /* Enable Timer overflow interrupt. */
/* Enable interrupts from the radio transceiver. */
hal_enable_trx_interrupt();
}
#endif /* !__AVR__ */
#if defined(__AVR_ATmega128RFA1__)
/* Hack for internal radio registers. hal_register_read and hal_register_write are
handled through defines, but the preprocesser can't parse a macro containing
another #define with multiple arguments, e.g. using
#define hal_subregister_read( address, mask, position ) (address&mask)>>position
#define SR_TRX_STATUS TRX_STATUS, 0x1f, 0
the following only sees 1 argument to the macro
return hal_subregister_read(SR_TRX_STATUS);
Possible fix is through two defines:
#define x_hal_subregister_read(x) hal_subregister_read(x);
#define hal_subregister_read( address, mask, position ) (address&mask)>>position
but the subregister defines in atmega128rfa1_registermap.h are currently set up without
the _SFR_MEM8 attribute, for use by hal_subregister_write.
*/
uint8_t
hal_subregister_read(uint16_t address, uint8_t mask, uint8_t position)
{
return (_SFR_MEM8(address)&mask)>>position;
}
void
hal_subregister_write(uint16_t address, uint8_t mask, uint8_t position,
uint8_t value)
{
HAL_ENTER_CRITICAL_REGION();
uint8_t register_value = _SFR_MEM8(address);
register_value &= ~mask;
value <<= position;
value &= mask;
value |= register_value;
_SFR_MEM8(address) = value;
HAL_LEAVE_CRITICAL_REGION();
}
#else /* defined(__AVR_ATmega128RFA1__) */
/*----------------------------------------------------------------------------*/
/** \brief This function reads data from one of the radio transceiver's registers.
*
* \param address Register address to read from. See datasheet for register
* map.
*
* \see Look at the at86rf230_registermap.h file for register address definitions.
*
* \returns The actual value of the read register.
*/
uint8_t
hal_register_read(uint8_t address)
{
uint8_t register_value;
/* Add the register read command to the register address. */
/* Address should be < 0x2f so no need to mask */
// address &= 0x3f;
address |= 0x80;
HAL_SPI_TRANSFER_OPEN();
/*Send Register address and read register content.*/
HAL_SPI_TRANSFER(address);
register_value = HAL_SPI_TRANSFER(0);
HAL_SPI_TRANSFER_CLOSE();
return register_value;
}
/*----------------------------------------------------------------------------*/
/** \brief This function writes a new value to one of the radio transceiver's
* registers.
*
* \see Look at the at86rf230_registermap.h file for register address definitions.
*
* \param address Address of register to write.
* \param value Value to write.
*/
void
hal_register_write(uint8_t address, uint8_t value)
{
/* Add the Register Write (short mode) command to the address. */
address = 0xc0 | address;
HAL_SPI_TRANSFER_OPEN();
/*Send Register address and write register content.*/
HAL_SPI_TRANSFER(address);
HAL_SPI_TRANSFER(value);
HAL_SPI_TRANSFER_CLOSE();
}
/*----------------------------------------------------------------------------*/
/** \brief This function reads the value of a specific subregister.
*
* \see Look at the at86rf230_registermap.h file for register and subregister
* definitions.
*
* \param address Main register's address.
* \param mask Bit mask of the subregister.
* \param position Bit position of the subregister
* \retval Value of the read subregister.
*/
uint8_t
hal_subregister_read(uint8_t address, uint8_t mask, uint8_t position)
{
/* Read current register value and mask out subregister. */
uint8_t register_value = hal_register_read(address);
register_value &= mask;
register_value >>= position; /* Align subregister value. */
return register_value;
}
/*----------------------------------------------------------------------------*/
/** \brief This function writes a new value to one of the radio transceiver's
* subregisters.
*
* \see Look at the at86rf230_registermap.h file for register and subregister
* definitions.
*
* \param address Main register's address.
* \param mask Bit mask of the subregister.
* \param position Bit position of the subregister
* \param value Value to write into the subregister.
*/
void
hal_subregister_write(uint8_t address, uint8_t mask, uint8_t position,
uint8_t value)
{
/* Read current register value and mask area outside the subregister. */
volatile uint8_t register_value = hal_register_read(address);
register_value &= ~mask;
/* Start preparing the new subregister value. shift in place and mask. */
value <<= position;
value &= mask;
value |= register_value; /* Set the new subregister value. */
/* Write the modified register value. */
hal_register_write(address, value);
}
#endif /* defined(__AVR_ATmega128RFA1__) */
/*----------------------------------------------------------------------------*/
/** \brief Transfer a frame from the radio transceiver to a RAM buffer
*
* This version is optimized for use with contiki RF230BB driver.
* The callback routine and CRC are left out for speed in reading the rx buffer.
* Any delays here can lead to overwrites by the next packet!
*
* If the frame length is out of the defined bounds, the length, lqi and crc
* are set to zero.
*
* \param rx_frame Pointer to the data structure where the frame is stored.
*/
void
hal_frame_read(hal_rx_frame_t *rx_frame)
{
#if defined(__AVR_ATmega128RFA1__)
uint8_t frame_length,*rx_data,*rx_buffer;
/* Get length from the TXT_RX_LENGTH register, not including LQI
* Bypassing the length check can result in overrun if buffer is < 256 bytes.
*/
frame_length = TST_RX_LENGTH;
if ((frame_length < HAL_MIN_FRAME_LENGTH) || (frame_length > HAL_MAX_FRAME_LENGTH)) {
/* Length test failed */
rx_frame->length = 0;
rx_frame->lqi = 0;
rx_frame->crc = false;
return;
}
rx_frame->length = frame_length;
/* Start of buffer in I/O space, pointer to RAM buffer */
rx_buffer=(uint8_t *)0x180;
rx_data = (rx_frame->data);
do{
*rx_data++ = _SFR_MEM8(rx_buffer++);
} while (--frame_length > 0);
/*Read LQI value for this frame.*/
rx_frame->lqi = *rx_buffer;
/* If crc was calculated set crc field in hal_rx_frame_t accordingly.
* Else show the crc has passed the hardware check.
*/
rx_frame->crc = true;
#else /* defined(__AVR_ATmega128RFA1__) */
uint8_t frame_length, *rx_data;
/*Send frame read (long mode) command.*/
HAL_SPI_TRANSFER_OPEN();
HAL_SPI_TRANSFER(0x20);
/*Read frame length. This includes the checksum. */
frame_length = HAL_SPI_TRANSFER(0);
/*Check for correct frame length. Bypassing this test can result in a buffer overrun! */
if ((frame_length < HAL_MIN_FRAME_LENGTH) || (frame_length > HAL_MAX_FRAME_LENGTH)) {
/* Length test failed */
rx_frame->length = 0;
rx_frame->lqi = 0;
rx_frame->crc = false;
}
else {
rx_data = (rx_frame->data);
rx_frame->length = frame_length;
/*Transfer frame buffer to RAM buffer */
HAL_SPI_TRANSFER_WRITE(0);
HAL_SPI_TRANSFER_WAIT();
do{
*rx_data++ = HAL_SPI_TRANSFER_READ();
HAL_SPI_TRANSFER_WRITE(0);
/* CRC was checked in hardware, but redoing the checksum here ensures the rx buffer
* is not being overwritten by the next packet. Since that lengthy computation makes
* such overwrites more likely, we skip it and hope for the best.
* Without the check a full buffer is read in 320us at 2x spi clocking.
* The 802.15.4 standard requires 640us after a greater than 18 byte frame.
* With a low interrupt latency overwrites should never occur.
*/
// crc = _crc_ccitt_update(crc, tempData);
HAL_SPI_TRANSFER_WAIT();
} while (--frame_length > 0);
/*Read LQI value for this frame.*/
rx_frame->lqi = HAL_SPI_TRANSFER_READ();
/* If crc was calculated set crc field in hal_rx_frame_t accordingly.
* Else show the crc has passed the hardware check.
*/
rx_frame->crc = true;
}
HAL_SPI_TRANSFER_CLOSE();
#endif /* defined(__AVR_ATmega128RFA1__) */
}
/*----------------------------------------------------------------------------*/
/** \brief This function will download a frame to the radio transceiver's frame
* buffer.
*
* \param write_buffer Pointer to data that is to be written to frame buffer.
* \param length Length of data. The maximum length is 127 bytes.
*/
void
hal_frame_write(uint8_t *write_buffer, uint8_t length)
{
#if defined(__AVR_ATmega128RFA1__)
uint8_t *tx_buffer;
tx_buffer=(uint8_t *)0x180; //start of fifo in i/o space
/* Write frame length, including the two byte checksum */
/* The top bit of the length field shall be set to 0 for IEEE 802.15.4 compliant frames */
/* It should already be clear, so bypassing the masking is sanity check of the uip stack */
// length &= 0x7f;
_SFR_MEM8(tx_buffer++) = length;
/* Download to the Frame Buffer.
* When the FCS is autogenerated there is no need to transfer the last two bytes
* since they will be overwritten.
*/
#if !RF230_CONF_CHECKSUM
length -= 2;
#endif
do _SFR_MEM8(tx_buffer++)= *write_buffer++; while (--length);
#else /* defined(__AVR_ATmega128RFA1__) */
/* Optionally truncate length to maximum frame length.
* Not doing this is a fast way to know when the application needs fixing!
*/
// length &= 0x7f;
HAL_SPI_TRANSFER_OPEN();
/* Send Frame Transmit (long mode) command and frame length */
HAL_SPI_TRANSFER(0x60);
HAL_SPI_TRANSFER(length);
/* Download to the Frame Buffer.
* When the FCS is autogenerated there is no need to transfer the last two bytes
* since they will be overwritten.
*/
#if !RF230_CONF_CHECKSUM
length -= 2;
#endif
do HAL_SPI_TRANSFER(*write_buffer++); while (--length);
HAL_SPI_TRANSFER_CLOSE();
#endif /* defined(__AVR_ATmega128RFA1__) */
}
/*----------------------------------------------------------------------------*/
/** \brief Read SRAM
*
* This function reads from the SRAM of the radio transceiver.
*
* \param address Address in the TRX's SRAM where the read burst should start
* \param length Length of the read burst
* \param data Pointer to buffer where data is stored.
*/
#if 0 //Uses 80 bytes (on Raven) omit unless needed
void
hal_sram_read(uint8_t address, uint8_t length, uint8_t *data)
{
HAL_SPI_TRANSFER_OPEN();
/*Send SRAM read command and address to start*/
HAL_SPI_TRANSFER(0x00);
HAL_SPI_TRANSFER(address);
HAL_SPI_TRANSFER_WRITE(0);
HAL_SPI_TRANSFER_WAIT();
/*Upload the chosen memory area.*/
do{
*data++ = HAL_SPI_TRANSFER_READ();
HAL_SPI_TRANSFER_WRITE(0);
HAL_SPI_TRANSFER_WAIT();
} while (--length > 0);
HAL_SPI_TRANSFER_CLOSE();
}
#endif
/*----------------------------------------------------------------------------*/
/** \brief Write SRAM
*
* This function writes into the SRAM of the radio transceiver. It can reduce
* SPI transfers if only part of a frame is to be changed before retransmission.
*
* \param address Address in the TRX's SRAM where the write burst should start
* \param length Length of the write burst
* \param data Pointer to an array of bytes that should be written
*/
#if 0 //omit unless needed
void
hal_sram_write(uint8_t address, uint8_t length, uint8_t *data)
{
HAL_SPI_TRANSFER_OPEN();
/*Send SRAM write command.*/
HAL_SPI_TRANSFER(0x40);
/*Send address where to start writing to.*/
HAL_SPI_TRANSFER(address);
/*Upload the chosen memory area.*/
do{
HAL_SPI_TRANSFER(*data++);
} while (--length > 0);
HAL_SPI_TRANSFER_CLOSE();
}
#endif
/*----------------------------------------------------------------------------*/
/* This #if compile switch is used to provide a "standard" function body for the */
/* doxygen documentation. */
#if defined(DOXYGEN)
/** \brief ISR for the radio IRQ line, triggered by the input capture.
* This is the interrupt service routine for timer1.ICIE1 input capture.
* It is triggered of a rising edge on the radio transceivers IRQ line.
*/
void RADIO_VECT(void);
#else /* !DOXYGEN */
/* These link to the RF230BB driver in rf230.c */
void rf230_interrupt(void);
extern hal_rx_frame_t rxframe[RF230_CONF_RX_BUFFERS];
extern uint8_t rxframe_head,rxframe_tail;
/* rf230interruptflag can be printed in the main idle loop for debugging */
#define DEBUG 0
#if DEBUG
volatile char rf230interruptflag;
#define INTERRUPTDEBUG(arg) rf230interruptflag=arg
#else
#define INTERRUPTDEBUG(arg)
#endif
#if defined(__AVR_ATmega128RFA1__)
/* The atmega128rfa1 has individual interrupts for the integrated radio'
* Whichever are enabled by the RF230 driver must be present even if not used!
*/
/* Received packet interrupt */
ISR(TRX24_RX_END_vect)
{
/* Get the rssi from ED if extended mode */
#if RF230_CONF_AUTOACK
rf230_last_rssi=hal_register_read(RG_PHY_ED_LEVEL);
#endif
/* Buffer the frame and call rf230_interrupt to schedule poll for rf230 receive process */
/* Is a ram buffer available? */
if (rxframe[rxframe_tail].length) {DEBUGFLOW('0');} else /*DEBUGFLOW('1')*/;
#ifdef RF230_MIN_RX_POWER
/* Discard packets weaker than the minimum if defined. This is for testing miniature meshes */
/* This does not prevent an autoack. TODO:rfa1 radio can be set up to not autoack weak packets */
if (rf230_last_rssi >= RF230_MIN_RX_POWER) {
#else
if (1) {
#endif
// DEBUGFLOW('2');
hal_frame_read(&rxframe[rxframe_tail]);
rxframe_tail++;if (rxframe_tail >= RF230_CONF_RX_BUFFERS) rxframe_tail=0;
rf230_interrupt();
}
}
/* Preamble detected, starting frame reception */
ISR(TRX24_RX_START_vect)
{
// DEBUGFLOW('3');
/* Save RSSI for this packet if not in extended mode, scaling to 1dB resolution */
#if !RF230_CONF_AUTOACK
rf230_last_rssi = 3 * hal_subregister_read(SR_RSSI);
#endif
}
/* PLL has locked, either from a transition out of TRX_OFF or a channel change while on */
ISR(TRX24_PLL_LOCK_vect)
{
// DEBUGFLOW('4');
}
/* PLL has unexpectedly unlocked */
ISR(TRX24_PLL_UNLOCK_vect)
{
DEBUGFLOW('5');
}
/* Flag is set by the following interrupts */
extern volatile uint8_t rf230_wakewait, rf230_txendwait,rf230_ccawait;
/* Wake has finished */
ISR(TRX24_AWAKE_vect)
{
// DEBUGFLOW('6');
rf230_wakewait=0;
}
/* Transmission has ended */
ISR(TRX24_TX_END_vect)
{
// DEBUGFLOW('7');
rf230_txendwait=0;
}
/* Frame address has matched ours */
ISR(TRX24_XAH_AMI_vect)
{
// DEBUGFLOW('8');
}
/* CCAED measurement has completed */
ISR(TRX24_CCA_ED_DONE_vect)
{
DEBUGFLOW('4');
rf230_ccawait=0;
}
#else /* defined(__AVR_ATmega128RFA1__) */
/* Separate RF230 has a single radio interrupt and the source must be read from the IRQ_STATUS register */
HAL_RF230_ISR()
{
volatile uint8_t state;
uint8_t interrupt_source; /* used after HAL_SPI_TRANSFER_OPEN/CLOSE block */
INTERRUPTDEBUG(1);
/* Using SPI bus from ISR is generally a bad idea... */
/* Note: all IRQ are not always automatically disabled when running in ISR */
HAL_SPI_TRANSFER_OPEN();
/*Read Interrupt source.*/
/*Send Register address and read register content.*/
HAL_SPI_TRANSFER_WRITE(0x80 | RG_IRQ_STATUS);
HAL_SPI_TRANSFER_WAIT(); /* AFTER possible interleaved processing */
interrupt_source = HAL_SPI_TRANSFER(0);
HAL_SPI_TRANSFER_CLOSE();
/*Handle the incomming interrupt. Prioritized.*/
if ((interrupt_source & HAL_RX_START_MASK)){
INTERRUPTDEBUG(10);
/* Save RSSI for this packet if not in extended mode, scaling to 1dB resolution */
#if !RF230_CONF_AUTOACK
#if 0 // 3-clock shift and add is faster on machines with no hardware multiply
// With -Os avr-gcc saves a byte by using the general routine for multiply by 3
rf230_last_rssi = hal_subregister_read(SR_RSSI);
rf230_last_rssi = (rf230_last_rssi <<1) + rf230_last_rssi;
#else // Faster with 1-clock multiply. Raven and Jackdaw have 2-clock multiply so same speed while saving 2 bytes of program memory
rf230_last_rssi = 3 * hal_subregister_read(SR_RSSI);
#endif
#endif
} else if (interrupt_source & HAL_TRX_END_MASK){
INTERRUPTDEBUG(11);
state = hal_subregister_read(SR_TRX_STATUS);
if((state == BUSY_RX_AACK) || (state == RX_ON) || (state == BUSY_RX) || (state == RX_AACK_ON)){
/* Received packet interrupt */
/* Buffer the frame and call rf230_interrupt to schedule poll for rf230 receive process */
if (rxframe[rxframe_tail].length) INTERRUPTDEBUG(42); else INTERRUPTDEBUG(12);
#ifdef RF230_MIN_RX_POWER
/* Discard packets weaker than the minimum if defined. This is for testing miniature meshes.*/
/* Save the rssi for printing in the main loop */
#if RF230_CONF_AUTOACK
//rf230_last_rssi=hal_subregister_read(SR_ED_LEVEL);
rf230_last_rssi=hal_register_read(RG_PHY_ED_LEVEL);
#endif
if (rf230_last_rssi >= RF230_MIN_RX_POWER) {
#endif
hal_frame_read(&rxframe[rxframe_tail]);
rxframe_tail++;if (rxframe_tail >= RF230_CONF_RX_BUFFERS) rxframe_tail=0;
rf230_interrupt();
#ifdef RF230_MIN_RX_POWER
}
#endif
}
} else if (interrupt_source & HAL_TRX_UR_MASK){
INTERRUPTDEBUG(13);
;
} else if (interrupt_source & HAL_PLL_UNLOCK_MASK){
INTERRUPTDEBUG(14);
;
} else if (interrupt_source & HAL_PLL_LOCK_MASK){
INTERRUPTDEBUG(15);
;
} else if (interrupt_source & HAL_BAT_LOW_MASK){
/* Disable BAT_LOW interrupt to prevent endless interrupts. The interrupt */
/* will continously be asserted while the supply voltage is less than the */
/* user-defined voltage threshold. */
uint8_t trx_isr_mask = hal_register_read(RG_IRQ_MASK);
trx_isr_mask &= ~HAL_BAT_LOW_MASK;
hal_register_write(RG_IRQ_MASK, trx_isr_mask);
INTERRUPTDEBUG(16);
;
} else {
INTERRUPTDEBUG(99);
;
}
}
#endif /* defined(__AVR_ATmega128RFA1__) */
# endif /* defined(DOXYGEN) */
/** @} */
/** @} */
/*EOF*/
Reference in New Issue View Git Blame Copy Permalink