contiki/cpu/cc26xx-cc13xx/rf-core/rf-ble.h
Jonas Olsson 01e36532c2 Add support for the CC13xx CPU
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00

99 lines
3.7 KiB
C

/*
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup rf-core
* @{
*
* \defgroup rf-core-ble CC13xx/CC26xx BLE driver
*
* @{
*
* \file
* Header file for the CC13xx/CC26xx BLE driver
*/
/*---------------------------------------------------------------------------*/
#ifndef RF_BLE_H_
#define RF_BLE_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
#include "rf-core/rf-core.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#ifdef RF_BLE_CONF_ENABLED
#define RF_BLE_ENABLED RF_BLE_CONF_ENABLED
#else
#define RF_BLE_ENABLED 1
#endif
/*---------------------------------------------------------------------------*/
#define RF_BLE_IDLE 0
#define RF_BLE_ACTIVE 1
/*---------------------------------------------------------------------------*/
/**
* \brief Set the device name to use with the BLE advertisement/beacon daemon
* \param interval The interval (ticks) between two consecutive beacon bursts
* \param name The device name to advertise
*
* If name is NULL it will be ignored. If interval==0 it will be ignored. Thus,
* this function can be used to configure a single parameter at a time if so
* desired.
*/
void rf_ble_beacond_config(clock_time_t interval, const char *name);
/**
* \brief Start the BLE advertisement/beacon daemon
* \return RF_CORE_CMD_OK: Success, RF_CORE_CMD_ERROR: Failure
*
* Before calling this function, the name to advertise must first be set by
* calling rf_ble_beacond_config(). Otherwise, this function will return an
* error.
*/
uint8_t rf_ble_beacond_start(void);
/**
* \brief Stop the BLE advertisement/beacon daemon
*/
void rf_ble_beacond_stop(void);
/**
* \brief Check whether the BLE beacond is currently active
* \retval 1 The radio is in BLE mode
* \retval 0 The BLE daemon is not active, or disabled
*/
uint8_t rf_ble_is_active(void);
/*---------------------------------------------------------------------------*/
#endif /* RF_BLE_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/