mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-15 00:29:02 +00:00
219 lines
5.5 KiB
C
219 lines
5.5 KiB
C
// ADC-based strong RNG
|
|
// Very slow, but who cares---if you need fast random numbers, use a PRNG.
|
|
|
|
#include "rng.h"
|
|
#include <avr/interrupt.h>
|
|
#include <avr/io.h>
|
|
#include <util/delay.h>
|
|
#include "contiki.h"
|
|
|
|
#ifndef RNG_CONF_USE_ADC
|
|
#define RNG_CONF_USE_ADC (!RNG_CONF_USE_RADIO_CLOCK && defined(ADMUX) && defined(ADCSRA) && defined(ADCSRB) && defined(ADSC) && defined(ADEN))
|
|
#endif
|
|
|
|
#ifndef RNG_CONF_USE_RADIO_CLOCK
|
|
#define RNG_CONF_USE_RADIO_CLOCK ((!RNG_CONF_USE_ADC) && RF230BB)
|
|
#endif
|
|
|
|
|
|
#define TEMPORAL_AGITATION() do { static uint8_t agitator; agitator*=97; agitator+=101; _delay_us(agitator>>1); } while (0);
|
|
|
|
|
|
// -------------------------------------------------------------------------
|
|
#if RNG_CONF_USE_ADC
|
|
/* The hope is that there is enough noise in the LSB when pointing the
|
|
** ADC at the internal band-gap input and using the internal 2.56v
|
|
** AREF.
|
|
**
|
|
** TODO: Run some randomness tests on the output of this RNG!
|
|
*/
|
|
|
|
#define BITS_TO_SHIFT 9
|
|
|
|
#define ADC_CHAN_ADC1 ((0<<MUX4)|(0<<MUX3)|(0<<MUX2)|(0<<MUX1)|(1<<MUX0))
|
|
#define ADC_CHAN_BAND_GAP ((1<<MUX4)|(1<<MUX3)|(1<<MUX2)|(1<<MUX1)|(0<<MUX0))
|
|
#define ADC_REF_AREF ((0<<REFS1)|(0<<REFS0))
|
|
#define ADC_REF_AVCC ((0<<REFS1)|(1<<REFS0))
|
|
#define ADC_REF_INT ((1<<REFS1)|(1<<REFS0))
|
|
#define ADC_TRIG_FREE_RUN ((0<<ADTS2)|(0<<ADTS1)|(0<<ADTS0))
|
|
#define ADC_PS_128 ((1<<ADPS2)|(1<<ADPS1)|(1<<ADPS0))
|
|
#define ADC_PS_2 ((0<<ADPS2)|(0<<ADPS1)|(1<<ADPS0))
|
|
|
|
#ifndef CONTIKI_CONF_RNG_ADC_CHANNEL
|
|
#define CONTIKI_CONF_RNG_ADC_CHANNEL ADC_CHAN_BAND_GAP
|
|
#endif
|
|
|
|
#ifndef CONTIKI_CONF_RNG_ADC_REF
|
|
#define CONTIKI_CONF_RNG_ADC_REF ADC_REF_INT
|
|
#endif
|
|
|
|
static uint8_t
|
|
extract_random_bit_() {
|
|
uint8_t ret = 0;
|
|
|
|
// Store the state so that we can restore it when we are done.
|
|
uint8_t sreg = SREG;
|
|
uint8_t adcsra = ADCSRA;
|
|
uint8_t admux = ADMUX;
|
|
uint8_t adcsrb = ADCSRB;
|
|
#ifdef PRR
|
|
uint8_t prr = PRR;
|
|
#endif
|
|
|
|
// Disable interrupts
|
|
cli();
|
|
|
|
#ifdef PRR
|
|
// Enable ADC module
|
|
PRR &= ~(1 << PRADC);
|
|
#endif
|
|
|
|
// Wait for any ADC conversion which
|
|
// might currently be happening to finish.
|
|
while(ADCSRA & (1<<ADSC));
|
|
|
|
// Configure the ADC module
|
|
ADCSRA = (1<<ADEN)|ADC_PS_128;
|
|
ADMUX = (uint8_t)CONTIKI_CONF_RNG_ADC_REF|(uint8_t)CONTIKI_CONF_RNG_ADC_CHANNEL;
|
|
ADCSRB = ADC_TRIG_FREE_RUN;
|
|
|
|
// This loop is where we try to come up with our
|
|
// random bit. Unfortunately, the time it takes
|
|
// for this to happen is non-deterministic, but
|
|
// the result should be non-biased random bit.
|
|
do {
|
|
// Start conversion for first bit
|
|
ADCSRA |= (1<<ADSC);
|
|
// Wait for conversion to complete.
|
|
while(ADCSRA & (1<<ADSC));
|
|
ret = (ADC&1);
|
|
ret <<= 1;
|
|
|
|
// Start conversion for second bit
|
|
ADCSRA |= (1<<ADSC);
|
|
// Wait for conversion to complete.
|
|
while(ADCSRA & (1<<ADSC));
|
|
ret |= (ADC&1);
|
|
|
|
// Toggling the reference voltage
|
|
// seems to help introduce noise.
|
|
ADMUX^=(1<<REFS1);
|
|
|
|
// We only want to exit the loop if the first
|
|
// and second sampled bits are different.
|
|
// This is preliminary conditioning.
|
|
} while((ret==0)||(ret==3));
|
|
|
|
// Toss out the other bit, we only care about one of them.
|
|
ret &= 1;
|
|
|
|
ADCSRA=0;
|
|
|
|
// Restore the state
|
|
ADCSRB = adcsrb;
|
|
ADMUX = admux;
|
|
ADCSRA = adcsra;
|
|
#ifdef PRR
|
|
PRR = prr;
|
|
#endif
|
|
SREG = sreg;
|
|
|
|
return ret;
|
|
}
|
|
|
|
// -------------------------------------------------------------------------
|
|
#elif RNG_CONF_USE_RADIO_CLOCK
|
|
/* Here we are hoping to find some noise in the clock skew
|
|
** of two different oscilating crystals. On the RZUSBstick,
|
|
** there are two such crystals: An 8MHz crystal for the
|
|
** microcontroller, and a 16MHz crystal and for the radio.
|
|
** The MCLK pin of the RF230 chip is conveniently connected
|
|
** to pin 6 of port D. First we need to have the radio
|
|
** output the 16MHz signal (it defaults to 1MHz), and then
|
|
** we can try to find some noise by sampling pin 6 of port D.
|
|
**
|
|
** The suitability of this method as a real random number
|
|
** generator has yet to be determined. It is entirely possible
|
|
** that the perceived randomness of the output is due to
|
|
** the temporal agitator mechanism that I have employed.
|
|
** Use with caution!
|
|
**
|
|
** TODO: Run some randomness tests on the output of this RNG!
|
|
*/
|
|
|
|
#define BITS_TO_SHIFT 8
|
|
|
|
#include "radio/rf230bb/hal.h"
|
|
#include "radio/rf230bb/at86rf230_registermap.h"
|
|
|
|
#ifndef TRX_CTRL_0
|
|
#define TRX_CTRL_0 0x03
|
|
#endif
|
|
|
|
static uint8_t
|
|
extract_random_bit_() {
|
|
uint8_t ret;
|
|
uint8_t trx_ctrl_0 = hal_register_read(TRX_CTRL_0);
|
|
|
|
// Set radio clock output to 8MHz
|
|
hal_register_write(TRX_CTRL_0,0x8|5);
|
|
|
|
do {
|
|
TEMPORAL_AGITATION(); // WARNING: This step may hide lack of entropy!
|
|
|
|
ret = !!(PIND&(1<<6));
|
|
ret <<= 1;
|
|
ret |= !!(PIND&(1<<6));
|
|
} while((ret==0)||(ret==3));
|
|
|
|
// Toss out the other bit, we only care about one of them.
|
|
ret &= 1;
|
|
|
|
// Restore the clkm state
|
|
hal_register_write(TRX_CTRL_0,trx_ctrl_0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif
|
|
|
|
// -------------------------------------------------------------------------
|
|
|
|
static uint8_t
|
|
extract_random_bit() {
|
|
uint8_t ret;
|
|
|
|
// These next two lines attempt to sync ourselves to
|
|
// any pattern that might happen to be present in the
|
|
// raw random source stream. After this, we use the
|
|
// bias removal mechanism below to filter out the first
|
|
// sign of noise.
|
|
while(extract_random_bit_()==1);
|
|
while(extract_random_bit_()==0);
|
|
|
|
do {
|
|
ret = extract_random_bit_();
|
|
ret <<= 1;
|
|
ret |= extract_random_bit_();
|
|
} while((ret==0)||(ret==3));
|
|
|
|
// Toss out the other bit, we only care about one of them.
|
|
ret &= 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
uint8_t
|
|
rng_get_uint8() {
|
|
uint8_t ret = 0, i;
|
|
for(i=0;i<BITS_TO_SHIFT;i++) {
|
|
// Leftshift.
|
|
ret <<= 1;
|
|
|
|
// Add a random bit.
|
|
ret |= extract_random_bit();
|
|
}
|
|
return ret;
|
|
}
|
|
|