contiki/cpu/stm32w108/hal/micro/cortexm3/nvm-def.h

54 lines
2.0 KiB
C

/** @file hal/micro/cortexm3/nvm-def.h
* @brief Data definitions for the Cortex-M3 Non-Volatile Memory data storage
* system.
* See @ref nvm for documentation.
*
* See hal/micro/cortexm3/nvm-def.h for source code.
*
* <!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
*/
/** @addtogroup nvm
* @brief Data definitions for the Cortex-M3 Non-Volatile Memory data storage
* system.
*
* This header defines all of the data sets in the NVM data storage. Each
* piece of data in NVM storage uses an offset to indicate where the data
* lives and a size to indicate the size of that data. Both the offset
* and size are defined in bytes and must be a mupltiple of 16bits. The
* offset is from the start of an NVM page, defined by NVM_LEFT_PAGE and
* NVM_RIGHT_PAGE. The offset and size must be below the maximum size
* of NVM storage as defined by NVM_DATA_SIZE_B. All NVM data must start
* above NVM_MGMT_SIZE_B, since this is where the management bytes live.
*
* @note This file is not directly used by the nvm.c or nvm.h files. This
* file is intended to be a convenient place to define all data that
* lives in NVM so it can be seen together in one group. nvm.h includes
* this file which means any code that includes nvm.h to call the read
* and write functions also has access to these defines.
*@{
*/
#ifndef NVM_DEF_H_
#define NVM_DEF_H_
//The bottom 64 bytes of NVM storage is allocated to radio calibration
//values. These 64 bytes *must* exist for the radio to function.
#define NVM_RADIO_CAL_OFFSET (NVM_MGMT_SIZE_B+0x0000)
#define NVM_RADIO_CAL_SIZE_B 64
//IMPORTANT: Data storage starts at offset 0x0040.
//Three example pieces of data:
#define NVM_FOO_OFFSET (NVM_MGMT_SIZE_B+0x0040)
#define NVM_FOO_SIZE_B 2
#define NVM_HAM_OFFSET (NVM_MGMT_SIZE_B+0x0042)
#define NVM_HAM_SIZE_B 10
#define NVM_SPAM_OFFSET (NVM_MGMT_SIZE_B+0x004C)
#define NVM_SPAM_SIZE_B 20
/** @} END addtogroup */
#endif // NVM_DEF_H_