contiki/cpu/cc2538/cc2538.lds
Benoît Thébaudeau 621f4f7339 cc2538: lpm: Give access to the SRAM non-retention area for PM2
If PM2 is enabled with LPM_CONF_MAX_PM, but not active, the non-retention area
of the SRAM can be useful to place temporary data that does not fit in the
low-leakage SRAM, typically after having called lpm_set_max_pm(LPM_PM1). Hence,
give access to this non-retention area thanks to .nrdata* sections.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 15:43:37 +01:00

102 lines
3.0 KiB
Plaintext

/*
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* cc2538 linker configuration file. This is not the actual file used at link
* stage. Rather, it is used as input for the auto-generation of the actual
* ld script, which is called cc2538.ld and will be in the project directory
*/
#if (LPM_CONF_MAX_PM==2) && (LPM_CONF_ENABLE != 0)
#define NRSRAM_START 0x20000000
#define NRSRAM_LEN 0x00004000
#define SRAM_START 0x20004000
#define SRAM_LEN 0x00004000
#else
#define SRAM_START 0x20000000
#define SRAM_LEN 0x00008000
#endif
MEMORY
{
FLASH (rx) : ORIGIN = 0x200000, LENGTH = 0x0007FFD4
FLASH_CCA (RX) : ORIGIN = 0x0027FFD4, LENGTH = 12
#if (LPM_CONF_MAX_PM==2) && (LPM_CONF_ENABLE != 0)
NRSRAM (RWX) : ORIGIN = NRSRAM_START, LENGTH = NRSRAM_LEN
#endif
SRAM (RWX) : ORIGIN = SRAM_START, LENGTH = SRAM_LEN
}
SECTIONS
{
.text :
{
_text = .;
KEEP(*(.vectors))
*(.text*)
*(.rodata*)
_etext = .;
} > FLASH= 0
.data :
{
_data = .;
*(vtable)
*(.data*)
_edata = .;
} > SRAM AT > FLASH
.ARM.exidx :
{
*(.ARM.exidx*)
} > FLASH
.bss :
{
_bss = .;
*(.bss*)
*(COMMON)
_ebss = .;
} > SRAM
#if (LPM_CONF_MAX_PM==2) && (LPM_CONF_ENABLE != 0)
.nrdata :
{
_nrdata = .;
*(.nrdata*)
_enrdata = .;
} > NRSRAM
#endif
.flashcca :
{
KEEP(*(.flashcca))
} > FLASH_CCA
}